Mpow M30-Manual-8

Mpow M30 Manual | Step-by-step Pairing Guide

The Mpow M30 come with specs such as Bluetooth 5.0, a battery life of about 5 hours on a full charge capacity, stereo speakers, 10 meters of working range, passive noise reduction technology, the amazing IPX7 waterproof certification, and much more. Learn how to use these earbuds using this manual!

Mpow M30 Manual | All You Have To Know!

How to Pair The Earbuds? Mode 1

To Android And iOS Devices

Step 1: Open the lid of the charging case and take both earbuds out. After that, a white light will start flashing, and the earbuds will turn on automatically. Also, you can press and hold the multifunction touch button on both earbuds for about 2 seconds.

A white and red light will start flashing and the earbuds will be ready to pair with any device.

Step 2: Unlock the desired device.

Step 3: Turn on Bluetooth on the desired device.

Step 4: Go to the device’s Bluetooth settings.

Step 5: Select the “Mpow M30” earbuds. If a password is needed, write “0000”. After that, the pairing will be done.

To PC (Windows)

Step 1: Open the lid of the charging case and take both earbuds out. After that, a white light will start flashing, and the earbuds will turn on automatically. Also, you can press and hold the multifunction touch button on both earbuds for about 2 seconds.

A white and red light will start flashing and the earbuds will be ready to pair with any device.

Step 2: Unlock the desired device.

Step 3: Go to the Settings.

Step 4: Go to “Bluetooth and other devices”.

Step 5: Turn on Bluetooth on the device.

Step 6: Click on “Add device”.

Step 7: Select the “Mpow M30” earbuds. If a password is needed, write “0000”. After that, the pairing will be done.

Mpow M30-Manual-1

How to Pair The Earbuds? Mode 2

To Android And iOS Devices

Step 1: Turn the earbuds on by pressing and holding the multifunction touch button on both earbuds for about 2 seconds. After that, a white light will start flashing, and the earbuds will turn on.

Step 2: Press the multifunction touch button on the right earbud two times. They will enter pairing mode. A white and red light will start flashing and the earbuds will be ready to pair with any device.

Step 3: Unlock the desired device.

Step 4: Turn on Bluetooth on the desired device.

Step 5: Go to the device’s Bluetooth settings.

Step 6: Select the “Mpow M30” earbuds. If a password is needed, write “0000”. After that, the pairing will be done.

To PC (Windows)

Step 1: Turn the earbuds on by pressing and holding the multifunction touch button on both earbuds for about 2 seconds. After that, a white light will start flashing, and the earbuds will turn on.

Step 2: Press the multifunction touch button on the right earbud two times. They will enter pairing mode. A white and red light will start flashing and the earbuds will be ready to pair with any device.

Step 3: Unlock the desired device.

Step 4: Go to the Settings.

Step 5: Go to “Bluetooth and other devices”.

Step 6: Turn on Bluetooth on the device.

Step 7: Click on “Add device”.

Step 8: Select the “Mpow M30” earbuds. If a password is needed, write “0000”. After that, the pairing will be done.

Mpow M30-Manual-2

How to Wear?

Step 1: Take both earbuds out of the charging case.

Step 2: Identify the left and right earbuds.

Step 3: Choose the ear tips that best suit your ears.

Step 4: Insert the headphones into the inner canal of the ears.

Step 5: Rotate for the best possible comfort and best fit, and make sure that the microphone is pointing to the mouth.

How to Turn On and Off?

Turn on: Open the lid of the charging case and take both earbuds out. After that, a white light will start flashing, and the earbuds will turn on automatically. Also, you can press and hold the multifunction touch button on both earbuds for about 2 seconds.

Turn off: Place the earbuds into the charging case. After that, the earbuds will turn off automatically. Also, you can press and hold the multifunction touch button on both earbuds for about 5 seconds.

How to Control? / How to Operate? – Instructions

  • Play or pause music: Press the multifunction touch button on any of the earbuds one time.
  • Play the next song: Press the multifunction touch button on the right earbud two times.
  • Play the previous song: Press the multifunction touch button on the left earbud two times.
  • Turn the volume up: Press and hold the multifunction touch button on the right earbud.
  • Turn the volume down: Press and hold the multifunction touch button on the left earbud.
  • Answer an incoming call: Press the multifunction touch button on any of the earbuds two times.
  • End a current call: Press the multifunction touch button on any of the earbuds two times.
  • Reject an incoming call: Press and hold the multifunction touch button on any of the earbuds for about 1 second.
  • Activate the voice assistant: Press the multifunction touch button on any of the earbuds three times.

How to Activate The Mono Mode?

To activate or deactivate the mono mode in these earbuds, all you have to do is to pair the earbuds to the device and take out one of the earbuds from the charging case. It will start working by itself.

How to Charge The Earbuds?

Earbuds

To charge the earbuds, all you have to do is to place them into the charging case and close the lid. The earbuds will start charging automatically.

Charging case

To charge the charging case, all you have to do is to connect the case to a USB charger or charging port with the included USB-A to C cable. It will start charging automatically.

Mpow M30-Manual-5

How to Reset The Earbuds?

Step 1: Place both earbuds into the charging case and keep the lid open.

Step 2: Press and hold the multifunction touch button on both earbuds for about 5 seconds. When a red light starts flashing, it means that the paired information was cleared successfully.

Mpow M30-Manual-6

What Do The Lights Mean?

Earbuds

  • A white light flashing: The earbuds turn on.
  • A white and red light flashing: The earbuds are now in pairing mode.
  • A red light flashing: The earbuds are resetting.

Charging case

  • A red light on while charging: The case has between 0% and 35% of battery.
  • A purple light on while charging: The case has between 35% and 75% of battery.
  • A blue light on while charging: The case has between 75% and 100% of battery.
Mpow M30-Manual-

Some Common Problems & Troubleshooting

Left / Right / One side of the earbuds has stopped working

If this happens, it may be because it is low on battery or it did not connect correctly with the device. To fix this, you can do the following:

1. Try charging the earbud that is not working or both, placing them in the charging case.

2. Try factory resetting the earbuds.

3. Check if the earbuds are operating within a normal working range

If that doesn’t work, the earbud is probably faulty, and I can go for a refund or replacement of it.

Left / Right / One side of the earbuds has a low volume

If this happens, it may be because the earbuds are dirty or the volume is set low. To fix this, you can do the following:

1. Try cleaning the earbud using a cotton swab or carefully clean the mesh with a pin.

2. Try factory resetting the earbuds.

The microphone is not working

If this happens, it can be because the microphone is muted, or the earbuds are badly positioned. To fix this, you can do the following:

If the microphone is muted, check the device microphone volume. If that doesn’t work, that means that there might be a defect in the earbud, so try replacing them or get a refund.

The earbuds are not connecting to Windows/laptop/PC

If the earbuds are earbuds not connecting, it can be because the Bluetooth on the computer has a pairing problem. To fix this, you can do the following:

1. Try disabling Bluetooth from nearby devices >>> then activate the pairing mode of the earbuds, pair and connect earbuds from Settings >>> Bluetooth & other devices >>> Add a new device >>>> select Bluetooth.

2. Try uninstalling and reinstalling the Bluetooth driver, or updating the Bluetooth driver. All can be done in Manage >>> Device Manager, reset earbuds (if available), and then repeat the step.

3. Try resetting the earbuds.

Mpow M30-Manual-8

FAQs

Are the Mpow M30 waterproof?

Yes, the Mpow M30 are waterproof (IPX6 and up). They have a rating of IPX7, meaning that they not only are against water but are also protected against the effects of immersion.

Do the Mpow M30 have a microphone?

Yes, the earbuds come with integrated microphones.

Do the Mpow M30 have a low latency/gaming mode?

No. These earbuds don’t have a low latency/gaming mode.

Can the Mpow M30 connect to PCs and laptops?

Yes, these earbuds can connect to PCs and laptops.

Are the Mpow M30 noise-canceling?

No. These earbuds don’t come with noise-cancellation technology.

We hope you now know how to operate the earphone from the above Mpow M30 manual. Want to know anything about the earphones? Do not hesitate to ask in the comments section.