Mpow MS1 Manual | Instructions & Troubleshooting 2021

The Mpow MS1 have specifications such as the incredible IPX7 waterproof certification, 5 hours of listening on a full Charge, Bluetooth 5.0, a smart touch sensor, and much more. Today we are going to teach you how to use them correctly in this new Mpow MS1 Manual.

Mpow MS1 Manual | Pairing & Charging Guide

Mpow MS1 Manual | How to Pair / Connect?

To iOS and Android phones

Step 1: Take the earbuds out of the charging case. The earbuds will automatically turn on and pair to each other, and a blue and red light will blink quickly.

Step 2: Turn on the Bluetooth on the desired device.

Step 3: Go to the Bluetooth settings.

Step 4: Select “Mpow MS1”. If a password is needed, type “0000”.

Step 5: After that, the pairing will be done.

To PC (Windows)

Step 1: Turn on Window’s Bluetooth.

Step 2: Go to the settings.

Step 3: Go to “Bluetooth and other devices”.

Step 4: Click on “Add device”.

Step 5: Click on Bluetooth.

Step 6: Take the earbuds out of the charging case. The earbuds will automatically turn on and pair to each other, and a blue and red light will blink quickly.

Step 7: Select “Mpow MS1”. If a password is needed, type “0000”.

Step 8: After that, the pairing will be done.

Mpow MS1 Manual | How to Manually Pair?

Step 1: Make sure that the earbuds are out of the charging case and turned off.

Step 2: Press and hold the multifunction button on both earbuds for 5 seconds to turn them on, until a LED light glows solid red.

Step 3: Press and hold the multifunction button on both earbuds for 4 seconds, until a red and blue light blinks quickly.

Step 4: Turn on the Bluetooth on the desired device.

Step 5: Go to the Bluetooth settings.

Step 6: Select “Mpow MS1”. If a password is needed, type “0000”.

Step 7: After that, the pairing will be done.

Mpow MS1 Manual | | How To Wear?

Step 1: Choose the ear tips that fit your ears the best.

Step 2: Identify the left and right earbuds.

Step 3: Insert the earbuds into the canal of the ears. Turn them around and make sure to find the most comfortable position.

Mpow MS1 Manual | How to Turn On And Off?

Turn on

Automatically: Take the earbuds out of the charging case. They will automatically turn on.

Manually: Press and hold the multifunction button on both earbuds for 2 seconds, until a LED light glows solid blue.

Turn off

Automatically: Place the earbuds into the charging case. They will automatically turn off.

Manually: Press and hold the multifunction button on both earbuds for 5 seconds, until a LED light glows solid red.

How to Control? / How to Operate? – Instructions

• Play and pause music: Touch the multifunction button on any of the earbuds once.
• Turn the volume up: Press and hold the multifunction button on the right earbud.
• Turn the volume down: Press and hold the multifunction button on the left earbud.
• Play the next song: Touch the multifunction button on the right earbud twice.
• Play the previous song: Touch the multifunction button on the left earbud twice.
• Answer an incoming call: Touch the multifunction button on any of the earbuds once.
• End a call: Touch the multifunction button on any of the earbuds once.
• Reject an incoming call: Press and hold the multifunction button on any of the earbuds for 1 second.
• Activate Voice Assistant: Touch the multifunction button on any of the earbuds three times.

Mpow MS1 Manual | How to Charge

Earbuds

To charge the earbuds, all you have to do is to place them into the charging case and close the lid. The earbuds will start charging automatically.

Charging case

To charge the charging case, all you have to do is plug a 5V USB Type-C cable into the port on the charging case. It will start charging automatically.

Mpow MS1 Manual | LED Light Status

Earbuds

• Blue light on: Earbuds turning on.
• Red light on: Earbuds turning off.
• Red and blue light blinking quickly: Earbuds ready to pair.
• Blue light on when resetting: Earbuds resetting.

Charging case

• One light on: 0 to 25% of battery.
• Two lights on: 25 to 50% of battery.
• Three lights on: 50 to 75% of battery.
• All four lights on: 75 to 100% of battery.

Mpow MS1 Manual | How to Reset?

Step 1: Place the earbuds into the charging case and make sure they are charging.

Step 2: Press and hold the multifunction button on both earbuds for 10 seconds, until a red and blue light blinks quickly.

Step 3: After that, the resetting will be done.

Some Common Earbuds Problems & Troubleshooting

Left / Right / One side of the earbuds have stopped working

If this happens, it may be because it is low on battery or it did not connect correctly with the device. To fix this, you can do the following:

1. Try charging the earbud that is not working or both, placing them in the charging case.

2. Try factory reset the earbuds.

3. Check if the earbuds are operating within a normal working range

If that doesn’t work, the earbud is probably faulty, and I can go for a refund or replacement of it.

Left / Right / One side of the earbuds has low volume

If this happens, it may be because the earbuds are dirty or the volume is set low. To fix this, you can do the following:

1. Try cleaning the earbud using a cotton swab or carefully clean the mesh with a pin.

2. Try factory reset the earbuds.

Microphone not working

If this happens, it can be because the microphone is muted, or the earbuds are badly positioned. To fix this, you can do the following:

If the microphone is muted, check the device microphone volume. If that doesn’t work, that means that there might be a defect in the earbud, so try replacing them or get a refund.

Mpow MS1 earbuds not connecting to Windows/laptop/PC

If the earbuds are earbuds not connecting, it can be because the Bluetooth on the computer has a pairing problem. To fix this, you can do the following:

1. Try disabling Bluetooth from nearby devices >>> then activate pairing mode of the earbuds, pair and connect earbuds from Settings >>> Bluetooth & other devices >>> Add a new device >>>> elect Bluetooth,

2. Try uninstalling and reinstalling the Bluetooth driver, or update the Bluetooth driver. All can be done in Manage >>> Device Manager, reset earbuds (if available), and then repeat the step.

3. Try resetting the earbuds as said in the pairing section above.

FAQs

We hope you now know how to operate the earphone from the above Mpow MS1 Manual. Want to know anything about the earphones? Do not hesitate to ask in the comments section.

In case you want or need to contact the Mpow company, all your information can be found on its Contact Us page, where you can find numbers and emails available for several countries! Also, they have a Support page, with FAQs and information about their products!