Mpow T6 Manual | Step-by-step, In-depth Guide 2021

The Mpow T6 comes with Bluetooth 5.0 with A2DP, AVRCP, HFP, and HSP profiles, the IPX7 certification, battery life of +3 hours, a charging case that can charge the earbuds fully 5 times, and much more. Learn how to use them with this new Mpow T6 Manual.

Mpow T6 Manual | Everything You Need To Know!

Mpow T6 Manual | How to Pair / Connect?

To iOS and Android phones

Step 1: Open the lid of the charging case. They will automatically turn on, enter pairing mode and a blue and green light will flash alternately.

Step 2: Go to the Bluetooth settings.

Step 3: Select “Mpow T6”. If a password is needed, type “0000”.

Step 4: After that, the pairing will be done.

To PC (Windows)

Step 1: Turn on Window’s Bluetooth.

Step 2: Go to the settings.

Step 3: Go to “Bluetooth and other devices”.

Step 4: Click on “Add device”.

Step 5: Click on Bluetooth.

Step 6: Open the lid of the charging case. They will automatically turn on, enter pairing mode and a blue and green light will flash alternately.

Step 7: Select “Mpow T6”. If a password is needed, type “0000”.

Step 8: After that, the pairing will be done.

Mpow T6 Manual | How to Activate Mono Mode?

To activate the mono mode in the Mpow T6, all you have to do is to pick up one of the earbuds from the charging case, and it will work by itself.

Mpow T6 Manual | How to Turn On and Off?

Turn on: Take the earbuds out of the charging case. A blue light will flash and they will turn on automatically.

Turn off: Place the earbuds into the charging case A green light will flash and they will turn on automatically.

How to Control? / How to Operate? – Instructions

• Play and pause music: Press the multifunction button on any of the earbuds once.
• Play the next song: Press the multifunction button on the right earbud two times.
• Play the previous song: Press the multifunction button on the left earbud two times.
• Turn the volume up: Press and hold the multifunction button on the right earbud.
• Turn the volume down: Press and hold the multifunction button on the left earbud.
• Answer an incoming call: Press the multifunction button on any of the earbuds two times.
• End a call: Press the multifunction button on any of the earbuds two times.
• Reject an incoming call: Press and hold the multifunction button on the any of the earbuds for 1 second.
• Activate the Voice Assistant: Press the multifunction button on the right earbud three times.

Mpow T6 Manual | How to Charge

Earbuds

To charge the earbuds, all you have to do is to place them into the charging case and close the lid. The earbuds will start charging automatically.

Charging case

To charge the charging case, all you have to do is plug a 5V USB Type-C cable into the port on the charging case. It will start charging automatically.

Mpow T6 Manual | LED Light Status

Earbuds

• Blue light flashing: Earbuds turn on.
• Green light flashing: Earbuds turn off.
• Blue and green light flashing alternately: Earbuds ready to pair.

Charging case

• Green light on: 0% to 35% of battery.
• Green and blue lights on alternately: 35% to 75% of battery.
• Blue light on: 75% to 100% of battery.

Mpow T6 Manual | How to Reset?

Step 1: Place both earbuds into the charging case.

Step 2: Press and hold the multifunction button on both earbuds for 5 seconds.

Step 3: After that, the resetting will be done.

Some Common Earbuds Problems & Troubleshooting

Left / Right / One side of the earbuds have stopped working

If this happens, it may be because it is low on battery or it did not connect correctly with the device. To fix this, you can do the following:

1. Try charging the earbud that is not working or both, placing them in the charging case.

2. Try factory resetting the earbuds.

3. Check if the earbuds are operating within a normal working range

If that doesn’t work, the earbud is probably faulty, and I can go for a refund or replacement of it.

Left / Right / One side of the earbuds has low volume

If this happens, it may be because the earbuds are dirty or the volume is set low. To fix this, you can do the following:

1. Try cleaning the earbud using a cotton swab or carefully clean the mesh with a pin.

2. Try factory resetting the earbuds.

Microphone not working

If this happens, it can be because the microphone is muted, or the earbuds are badly positioned. To fix this, you can do the following:

If the microphone is muted, check the device microphone volume. If that doesn’t work, that means that there might be a defect in the earbud, so try replacing them or get a refund.

Mpow T6 earbuds not connecting to Windows/laptop/PC

If the earbuds are earbuds not connecting, it can be because the Bluetooth on the computer has a pairing problem. To fix this, you can do the following:

1. Try disabling Bluetooth from nearby devices >>> then activate pairing mode of the earbuds, pair and connect earbuds from Settings >>> Bluetooth & other devices >>> Add a new device >>>> elect Bluetooth,

2. Try uninstalling and reinstalling the Bluetooth driver, or update the Bluetooth driver. All can be done in Manage >>> Device Manager, reset earbuds (if available), and then repeat the step.

3. Try resetting the earbuds.

FAQs

We hope you now know how to operate the earphone from the above Mpow T6 Manual. Want to know anything about the earphones? Do not hesitate to ask in the comments section.

In case you want or need to contact the Mpow company, all your information can be found on its Contact Us page, where you can find numbers and emails available for several countries! Also, they have a Support page, with FAQs and information about their products!