Mpow-X3-ANC-Manual-7

Mpow X3 ANC Manual | Instructions & Troubleshooting 2021

The Mpow X3 ANC comes with an IPX8 certification, Bluetooth 5.0, a battery life of 7 hours, a 10mm driver size, and much more. Learn how to use them with this new Mpow X3 ANC Manual.

Mpow X3 ANC Manual | Everything You Need To Know!

Mpow X3 ANC Manual | How to Pair / Connect?

To iOS and Android phones

Step 1: Take both earbuds out of the charging case. They will automatically turn on, a green and red light will start flashing, and be ready to pair.

Step 2: Go to the Bluetooth settings.

Step 3: Select “Mpow X3”. If a password is needed, type “0000”.

Step 4: After that, the pairing will be done.

To PC (Windows)

Step 1: Turn on Window’s Bluetooth.

Step 2: Go to the settings.

Step 3: Go to “Bluetooth and other devices”.

Step 4: Click on “Add device”.

Step 5: Click on Bluetooth.

Step 6: Take both earbuds out of the charging case. They will automatically turn on, a green and red light will start flashing, and be ready to pair.

Step 7: Select “Mpow X3”. If a password is needed, type “0000”.

Step 8: After that, the pairing will be done.

Mpow-X3-ANC-Manual-1

Mpow X3 ANC Manual | How to Turn On And Off?

Turn on: Take the earbuds out of the charging case. They will automatically turn on.

Turn off: Place the earbuds into the charging case. They will automatically turn off.

Mpow-X3-ANC-Manual-2

Mpow X3 ANC Manual | How to Activate Mono Mode?

To activate the mono mode on the Mpow X3 ANC, all you have to do is to place one of the earbuds into the charging case, and the other one will keep working.

Mpow X3 ANC Manual | How to Activate ANC?

To activate the Active Noise Cancelation feature on the Mpow X3 ANC, all you have to do is to press and hold the multifunction button on the right earbud for 2 seconds.

How to Control? / How to Operate? – Instructions

  • Play and pause music: Press the multifunction button on any of the earbuds twice.
  • Turn the volume up: Press the multifunction button on the right earbud.
  • Turn the volume down: Press the multifunction button on the left earbud.
  • Play the next song: Press the multifunction button on the right earbud three times.
  • Play the previous song: Press the multifunction button on the left earbud three times.
  • Answer an incoming call: Press the multifunction button on any of the earbuds once.
  • End a call: Press the multifunction button on any of the earbuds twice.
  • Reject an incoming call: Press and hold the multifunction button on any of the earbuds for 2 seconds.
  • Activate the Voice Assistant: Press and hold the multifunction button on the right earbud for 2 seconds.
Mpow-X3-ANC-Manual-3

Mpow X3 ANC Manual | How to Charge

Earbuds

To charge the earbuds, all you have to do is to place them into the charging case and close the lid. The earbuds will start charging automatically.

Charging case

To charge the charging case, all you have to do is plug a 5V USB Type-C cable into the port on the charging case. It will start charging automatically.

Mpow-X3-ANC-Manual-4

Mpow X3 ANC Manual | LED Light Status

Earbuds

  • Green and red light flashing: Earbuds ready to pair.
  • Red light flashing 3 times: Earbuds resetting.
  • Green light on: Earbuds turn on.
  • Red light on: Earbuds turn off.

Charging case

  • One light on: 0 – 25% of battery.
  • Two lights on: 25 – 50% of battery.
  • Three lights on: 50 – 75% of battery.
  • All lights on: 75 – 100% of battery.
Mpow-X3-ANC-Manual-5

Mpow X3 ANC Manual | How to Reset?

Step 1: Turn off the Bluetooth on the connected device.

Step 2: Take the right earbuds out of the charging case.

Step 3: Press and hold the multifunction button on the right earbud for about 10 seconds until a red light flashes 3 times.

Step 4: After that, the resetting will be done.

Mpow-X3-ANC-Manual-6

Some Common Earbuds Problems & Troubleshooting

Left / Right / One side of the earbuds have stopped working

If this happens, it may be because it is low on battery or it did not connect correctly with the device. To fix this, you can do the following:

1. Try charging the earbud that is not working or both, placing them in the charging case.

2. Try factory reset the earbuds.

3. Check if the earbuds are operating within a normal working range

If that doesn’t work, the earbud is probably faulty, and I can go for a refund or replacement of it.

Left / Right / One side of the earbuds has low volume

If this happens, it may be because the earbuds are dirty or the volume is set low. To fix this, you can do the following:

1. Try cleaning the earbud using a cotton swab or carefully clean the mesh with a pin.

2. Try factory reset the earbuds.

Microphone not working

If this happens, it can be because the microphone is muted, or the earbuds are badly positioned. To fix this, you can do the following:

If the microphone is muted, check the device microphone volume. If that doesn’t work, that means that there might be a defect in the earbud, so try replacing them or get a refund.

Mpow X3 ANC earbuds not connecting to Windows/laptop/PC

If the earbuds are earbuds not connecting, it can be because the Bluetooth on the computer has a pairing problem. To fix this, you can do the following:

1. Try disabling Bluetooth from nearby devices >>> then activate pairing mode of the earbuds, pair and connect earbuds from Settings >>> Bluetooth & other devices >>> Add a new device >>>> elect Bluetooth,

2. Try uninstalling and reinstalling the Bluetooth driver, or update the Bluetooth driver. All can be done in Manage >>> Device Manager, reset earbuds (if available), and then repeat the step.

3. Try resetting the earbuds.

Mpow-X3-ANC-Manual-7

FAQs

Are Mpow X3 ANC waterproof?

The Mpow X3 ANC have an IPX8 water-resistant rating, this being the highest one and meaning that not only are they against water but they are also protected against heavy rain and heavy sweat.

Does Mpow X3 ANC have a microphone?

Yes, the Mpow X3 ANC have 4 integrated microphones.

Do Mpow X3 ANC have low latency/gaming mode?

No, the Mpow X3 ANC don’t have low latency/gaming mode.

How to know when Mpow X3 ANC are fully charged?

The Mpow X3 ANC takes about 2 hours to charge so, after that time, they will be fully charged.

Can Mpow X3 ANC connect to PC and Laptop?

Yes, the Mpow X3 ANC can connect to PCs, laptops, and tablets.

We hope you now know how to operate the earphone from the above Mpow X3 ANC Manual. Want to know anything about the earphones? Do not hesitate to ask in the comments section.

In case you want or need to contact the Mpow company, all your information can be found on its Contact Us page, where you can find numbers and emails available for several countries! Also, they have a Support page, with FAQs and information about their products!