Mysic-J5-Manual-6

Mysic J5 Manual | Pairing & Charging Guide

The Mysic J5 earbuds come with specs such as Bluetooth 5.2 + EDR technology support, Transparency mode, about 4 hours of battery life on a single charge, built-in microphones inside each earbud, a light weight of only 4 grams per earbud, and much more. Learn how to use these earbuds using this Mysic J5 manual!

If you are interested in purchasing these earbuds, you can easily do it using the Amazon online store. Also, in case you are interested in giving the original manual a look, you can do it here.

Mysic J5 Specs Sheet

ModelMysic J5
WeightEarbuds: Around 4 grams each
Waterproof/IP ratings  IPX4
Bluetooth version          V5.2
Range/Distance10 meters
Connectivity Port/Charging CableType-C
Audio Decoding               SBC
Speaker frequency response20Hz – 20kHz
Battery Life       Earbuds: Around 4 hours
Charging Time  Earbuds: Around 1 hour
Charging case: Around 1.5 hours
App Support     No
Controls/Features         Play and pause a song, play the next and previous song, answer, end, and reject a call, voice assistant, turn the volume up and down, Transparency mode
Accessories       Charging case, USB cable, user manual, ear tips
PriceAround 20 USD

Mysic J5 Accessories

The earbuds come with the following accessories:

  • Charging case.
  • USB cable.
  • User manual.
  • Ear tips.
Mysic-J5-Manual-1

Mysic J5 Manual | Guide & Troubleshooting

How To Wear These Earbuds?

Step 1: Take both earbuds out of the charging case.

Step 2: Identify the left and right earbuds.

Step 3: Choose the ear tips that best suit your ears.

Step 4: Insert the headphones into the inner canal of the ears.

Step 5: Rotate for the best possible comfort and best fit, and make sure that the microphone is pointing to the mouth.

How To Turn On And Off?

Turn On

Automatically: Open the lid of the charging case. After that, the earbuds will turn on automatically.

Manually: Press and hold the multifunction touch button on both earbuds for about 5 seconds. After that, the earbuds will turn on.

Turn Off

Automatically: Place the earbuds into the charging case and close its lid. After that, the earbuds will turn off automatically.

Manually: Press and hold the multifunction touch button on both earbuds for about 5 seconds. After that, the earbuds will turn off.

Mysic-J5-Manual-2

How To Pair The Earbuds?

To Android And iOS Devices

Step 1: Open the lid of the charging case. After that, the earbuds will turn on automatically.

Step 2: Press and hold the multifunction touch button on both earbuds for about 5 seconds. A blue light will start flashing, and the earbuds will pair.

Step 3: Unlock the desired device.

Step 4: Go to the device’s settings.

Step 5: Turn on Bluetooth on the desired device.

Step 6: Search for a new device.

Step 7: Select the J5 earbuds. If a password is needed, type “0000” or “1234”.

After that, the pairing will be done.

To Windows (PC)

Step 1: Turn on the Window’s Bluetooth.

Step 2: Go to the settings.

Step 3: Go to “Bluetooth and other devices”.

Step 4: Click on “Add device”.

Step 5: Click on Bluetooth.

Step 6: Open the lid of the charging case. After that, the earbuds will turn on automatically.

Step 7: Press and hold the multifunction touch button on both earbuds for about 5 seconds. A blue light will start flashing, and the earbuds will pair.

Step 8: Select the J5 earbuds. If a password is needed, type “0000” or “1234”.

After that, the pairing will be done.

Mysic-J5-Manual-3

How To Control These Earbuds?

NOTE: The multifunction touch button is placed on the upper part of the body of the earbuds.

  • Play and pause a song: Press the multifunction touch button on any of the earbuds one time.
  • Turn the volume up: Press the multifunction touch button on the left earbud two times.
  • Turn the volume down: Press the multifunction touch button on the right earbud two times.
  • Play the next song: Press the multifunction touch button on the left earbud three times.
  • Play the previous song: Press the multifunction touch button on the right earbud three times.
  • Answer an incoming call: Press the multifunction touch button on any of the earbuds one time.
  • End a current call: Press the multifunction touch button on any of the earbuds one time.
  • Reject an incoming call: Press and hold the multifunction touch button on the left earbud for about 2 seconds.
  • Activate the voice assistant: Press and hold the multifunction touch button on the left earbud for about 2 seconds.
  • Activate the Transparency mode: Press and hold the multifunction touch button on the left earbud for about 3 seconds.
Mysic-J5-Manual-4

How To Charge The Earbuds?

Earbuds

To charge the earbuds, all you have to do is place them into the charging case and close its lid. The earbuds will start charging automatically.

Charging Case

To charge the charging case, all you have to do is connect the case to a USB charger or charging port. It will start charging automatically.

What Do The Lights Mean?

Earbuds

  • A blue light flashes: The earbuds are paired.

Charging Case

  • 0 to 99 appears on the display while charging: The case is charging.
  • A 100 appears on the display while charging: The case is fully charged.
  • A white light flashes while charging: The case is charging.
  • Said white light turns off while charging: The case is fully charged.
  • A green earphone display flashes two times with the earbuds inside: The earbuds were detected by the case.
  • A green earphone display flashes slowly with the earbuds inside: The earbuds are charging.
  • A red light flashes with the earbuds inside: The earbuds are charging.
  • A red light on for 10 seconds, and a blue light turns on and off: The earbuds are fully charged.

Do These Earbuds Have An App?

No, these earbuds don’t come with app support.

Some Common Problems & Troubleshooting

Left/Right/One side of the earbuds has stopped working

If this happens, it may be because it is low on battery or it did not connect correctly with the device. To fix this, you can do the following:

1. Try charging the earbud that is not working or both, placing them in the charging case.

2. Try factory resetting the earbuds.

3. Check if the earbuds are operating within a normal working range.

If that doesn’t work, the earbud is probably faulty, and I can go for a refund or replacement of it.

Left/Right/One side of the earbuds has a low volume

If this happens, it may be because the earbuds are dirty or the volume is set low. To fix this, you can do the following:

1. Try cleaning the earbud using a cotton swab or carefully clean the mesh with a pin.

2. Try factory resetting the earbuds.

The microphone is not working

If this happens, it can be because the microphone is muted, or the earbuds are badly positioned. To fix this, you can do the following:

If the microphone is muted, check the device microphone volume. If that doesn’t work, that means that there might be a defect in the earbuds, so try replacing them or getting a refund.

The earbuds are not connecting to Windows/laptop/PC

If the earbuds are not connecting, it can be because the Bluetooth on the computer has a pairing problem. To fix this, you can do the following:

1. Try disabling Bluetooth from nearby devices >>> then activate the pairing mode of the earbuds, pair and connect earbuds from Settings >>> Bluetooth & other devices >>> Add a new device >>>> Select Bluetooth.

2. Try uninstalling and reinstalling the Bluetooth driver, or updating the Bluetooth driver. All can be done in Manage >>> Device Manager, reset earbuds (if available), and then repeat the step.

3. Try resetting the earbuds.

Mysic-J5-Manual-6

FAQs

Do the Mysic J5 have a microphone?

Yes, the earbuds come with integrated microphones.

Do the Mysic J5 have a low latency/gaming mode?

No, these earbuds don’t have a low latency/gaming mode.

Can the Mysic J5 connect to PCs and laptops?

Yes, these earbuds can connect to PCs and laptops.

Are the Mysic J5 noise-canceling?

No, these earbuds don’t come with noise-cancellation technology.

Are the Mysic J5 waterproof?

No, these earbuds are not waterproof (IPX6 and up). They have a rating of IPX4, which means they’re splash and sweat-resistant.

We hope you now know how to operate the earbuds from the above Mysic J5 manual. Want to know anything about the earbuds? Do not hesitate to ask in the comment section below.