Noble Audio FoKus Pro | Step-by-step, In-depth Guide

The Noble Audio FoKus Pro earbuds have Bluetooth 5.2 with support for the A2DP, AVRCP, HFP, and HSP audio profiles, 1 dynamic + 2 balanced armature dynamic drivers, a working range of about 10 meters, 7 hours of battery life + 24 hours using the charging case, a charging time of 1 hour, and much more. Learn how to use these earbuds using this manual!

Noble Audio FoKus Pro | Pairing & Charging Guide

How to Pair The Earbuds?

To iOS and Android phones

Step 1: Open the lid of the charging case. After that, a white light will flash for one second, and the earbuds will turn on automatically. Also, you can press and hold the multifunction touch button on both earbuds for about 3 seconds.

When a blue and white light starts flashing on both earbuds, it means that they are now ready to pair with any device.

Step 2: Turn on Bluetooth on the desired device.

Step 3: Go to the device’s Bluetooth settings.

Step 4: Select “Noble FoKus Pro“. If a password is needed, type “0000”. After that, a “Connected” voice prompt will sound, a white light will flash every 7 seconds on each earbud, and the pairing will be done.

To PC (Windows)

Step 1: Turn on Bluetooth on the desired device.

Step 2: Go to the settings.

Step 3: Go to “Bluetooth and other devices”.

Step 4: Click on “Add device”.

Step 5: Open the lid of the charging case. After that, a white light will flash for one second, and the earbuds will turn on automatically. Also, you can press and hold the multifunction touch button on both earbuds for about 3 seconds.

When a blue and white light starts flashing on both earbuds, it means that they are now ready to pair with any device.

Step 6: Select “Noble FoKus Pro“. If a password is needed, type “0000”. After that, a “Connected” voice prompt will sound, a white light will flash every 7 seconds on each earbud, and the pairing will be done.

How to Pair To A New Device?

Step 1: Open the lid of the charging case. After that, a white light will flash for one second, and the earbuds will turn on automatically. Also, you can press and hold the multifunction touch button on both earbuds for about 3 seconds.

The earbuds will automatically pair with the currently paired device.

Step 2: Delete all the “Noble FoKus Pro” pairing information on the currently paired device.

Step 3: Once disconnected, the earbuds will automatically enter pairing mode again, and a blue and white light will start flashing.

Step 4: Turn on Bluetooth on the desired device.

Step 5: Go to the device’s Bluetooth settings.

Step 6: Select “Noble FoKus Pro“. If a password is needed, type “0000”. After that, a “Connected” voice prompt will sound, a white light will flash every 7 seconds on each earbud, and the pairing will be done.

How to Wear?

Step 1: Take both earbuds out of the charging case.

Step 2: Identify the left and right earbuds.

Step 3: Choose the ear tips that best suit your ears.

Step 4: Insert the headphones into the inner canal of the ears.

Step 5: Rotate for the best possible comfort and best fit, and make sure that the microphone is pointing to the mouth.

How to Turn On and Off?

Turn on: Open the lid of the charging case. After that, a white light will flash for one second, and the earbuds will turn on automatically. Also, you can press and hold the multifunction touch button on both earbuds for about 3 seconds.

Turn off: Place the earbuds into the charging case and close its lid. After that, a blue light will flash for one second, and the earbuds will turn on automatically. Also, you can press and hold the multifunction touch button on both earbuds for about 7 seconds.

How to Control? / How to Operate? – Instructions

• Play or pause a song: Press the multifunction touch button on any of the earbuds one time.
• Turn the volume up: Press the multifunction touch button on the left earbud three times.
• Turn the volume down: Press the multifunction touch button on the left earbud two times.
• Play the next song: Press the multifunction touch button on the right earbud two times.
• Play the previous song: Press the multifunction touch button on the right earbud three times.
• Answer an incoming call: Press the multifunction touch button on any of the earbuds one time.
• End a current call: Press the multifunction touch button on any of the earbuds one time.
• Reject an incoming call: Press and hold the multifunction touch button on any of the earbuds for about 2 seconds.
• Activate the voice assistant: Press and hold the multifunction touch button on any of the earbuds for about 2 seconds.

How to Activate The Mono Mode?

To activate or deactivate the mono mode in these earbuds, all you have to do is to pair the earbuds to the device and take out one of the earbuds from the charging case. It will start working by itself.

How to Charge The Earbuds?

Earbuds

To charge the earbuds, all you have to do is to place them into the charging case and close the lid. The earbuds will start charging automatically.

Charging case

To charge the charging case, all you have to do is to connect the case to a USB charger or charging port with the included USB-A to C cable. It will start charging automatically.

How to Reset The Earbuds?

Step 1: Delete all the “Noble FoKus Pro” pairing information on the connected device.

Step 2: Place the earbuds into the charging case and keep the lid open.

Step 3: Press the reset button on the inside of the charging case once. A blue and white light on the earbuds will flash twice alternately. All previously paired devices will be cleared.

If the earbuds cannot pair to each other or to the Bluetooth device, do the following steps:

Step 1: Delete all the “Noble FoKus Pro” pairing information on the connected device.

Step 2: Place the earbuds into the charging case and keep the lid open.

Step 3: Press and hold the reset button on the inside of the charging case for about 5 seconds, until the light on the earbuds starts flashing quickly. After that, the resetting will be done.

What Do The Lights Mean?

Earbuds

• A blue and white light flashing twice alternately: The earbud’s pairing list has been cleared.
• The light on the earbuds starts flashing quickly: The earbuds are resetting.

Charging case

• A white light flashes for one second: The earbuds turn off.
• A blue light flashes for one second: The earbuds turn off.
• A blue and white light starts flashing: The earbuds are now ready to pair with any device.
• A white light flashing every 7 seconds: The pairing was successful.
• All lights are off: The music is playing.
• A white light flashes twice every 8 seconds: The earbuds have a low power.
• A blue light turns on: The earbuds are placed in the charging case.
• Said blue light turns off: The earbuds are silted on the charging case.
• The last light flashing: The earbuds are charging.
• All lights turn on: The earbuds are fully charged.
• One light flashing while charging: The case has less than 25% of battery.
• One light on and one flashing while charging: The case has between 25% and 50% of battery.
• Two lights on and one flashing while charging: The case has between 50% and 75% of battery.
• Three lights on and one flashing while charging: The case has more than 75% of battery.
• All four lights on while charging: The case is fully charged.

Some Common Problems & Troubleshooting

Left / Right / One side of the earbuds has stopped working

If this happens, it may be because it is low on battery or it did not connect correctly with the device. To fix this, you can do the following:

1. Try charging the earbud that is not working or both, placing them in the charging case.

2. Try factory resetting the earbuds.

3. Check if the earbuds are operating within a normal working range

If that doesn’t work, the earbud is probably faulty, and I can go for a refund or replacement of it.

Left / Right / One side of the earbuds has a low volume

If this happens, it may be because the earbuds are dirty or the volume is set low. To fix this, you can do the following:

1. Try cleaning the earbud using a cotton swab or carefully clean the mesh with a pin.

2. Try factory resetting the earbuds.

The microphone is not working

If this happens, it can be because the microphone is muted, or the earbuds are badly positioned. To fix this, you can do the following:

If the microphone is muted, check the device microphone volume. If that doesn’t work, that means that there might be a defect in the earbud, so try replacing them or get a refund.

The earbuds are not connecting to Windows/laptop/PC

If the earbuds are earbuds not connecting, it can be because the Bluetooth on the computer has a pairing problem. To fix this, you can do the following:

1. Try disabling Bluetooth from nearby devices >>> then activate the pairing mode of the earbuds, pair and connect earbuds from Settings >>> Bluetooth & other devices >>> Add a new device >>>> select Bluetooth.

2. Try uninstalling and reinstalling the Bluetooth driver, or updating the Bluetooth driver. All can be done in Manage >>> Device Manager, reset earbuds (if available), and then repeat the step.

3. Try resetting the earbuds.

FAQs

We hope you now know how to operate the earphone from the above Noble Audio FoKus Pro manual. Want to know anything about the earphones? Do not hesitate to ask in the comments section.