Noise Buds Solo Manual | How Can You Use These Earbuds?

The Noise Buds Solo earbuds come with specs such as Active Noise Cancellation and Transparency modes, a battery life of up to 36 hours using the charging case, Bluetooth 5.0, three integrated microphones in each earbud, intuitive in-ear detection, 10 meters of connection range, the IPX4 sweat and dust-proof certification, and much more. Learn how to use these earbuds using this Noise Buds Solo manual!

Noise Buds Solo Manual | Earbuds Pairing Guide

How To Wear These Earbuds?

Step 1: Take both earbuds out of the charging case.

Step 2: Identify the left and right earbuds.

Step 3: Choose the ear tips that best suit your ears.

Step 4: Insert the headphones into the inner canal of the ears.

Step 5: Rotate for the best possible comfort and best fit, and make sure that the microphone is pointing to the mouth.

How To Turn On And Off?

Turn On

Automatically: Open the lid of the charging case. After that, the earbuds will turn on automatically.

Turn Off

Automatically: Place the earbuds into the charging case and close its lid. After that, the earbuds will turn off automatically.

How To Pair The Earbuds?

To Android Or iOS Devices

Step 1: Open the lid of the charging case. After that, the earbuds will turn on automatically and pair with each other.

Step 2: Unlock the desired device.

Step 3: Go to the device’s settings.

Step 4: Turn on Bluetooth on the desired device.

Step 5: Search for a new device.

Step 6: Select the Buds Solo earbuds. If a password is needed, type “0000”.  After that, the pairing will be done.

To Windows (PC)

Step 1: Turn on the Window’s Bluetooth.

Step 2: Go to the settings.

Step 3: Go to “Bluetooth and other devices”.

Step 4: Click on “Add device”.

Step 5: Click on Bluetooth.

Step 6: Open the lid of the charging case. After that, the earbuds will turn on automatically and pair with each other.

Step 7: Select the Buds Solo earbuds. If a password is needed, type “0000”.  After that, the pairing will be done.

How To Control These Earbuds? – Stereo Mode

• Auto-pause a song: Take the earbuds out of the ear canal.
• Auto-play a song: Place the earbuds into the ear canal.
• Play or pause a song: Press the multifunction touch button on any of the earbuds two times.
• Play the next song: While listening to music, press the multifunction touch button on the right earbud three times.
• Play the previous song: While listening to music, press the multifunction touch button on the left earbud three times.
• Turn the volume up: Press the multifunction touch button on the right earbud one time.
• Turn the volume down: Press the multifunction touch button on the left earbud one time.
• Answer an incoming call: Press the multifunction touch button on any of the earbuds one time.
• End a current call: Press the multifunction touch button on any of the earbuds two times.
• Reject an incoming call: With an incoming call, press and hold the multifunction touch button on any of the earbuds for about 2 seconds.
• Activate the voice assistant: Press and hold the multifunction touch button on the left earbud for about 2 seconds.

How To Activate The ANC Mode?

To activate the active noise cancellation mode in these earbuds, all you have to do is press and hold the multifunction touch button on the right earbud for about 2 seconds.

How To Activate The Transparency Mode?

To activate the transparency mode in these earbuds, all you have to do is press and hold the multifunction touch button on the right earbud for about 2 seconds.

How To Activate The Mono Mode?

To activate or deactivate the mono mode in these earbuds, all you have to do is pair the earbuds to the device and take out one of the earbuds from the charging case. It will start working by itself.

How To Charge The Earbuds?

Earbuds

To charge the earbuds, all you have to do is place them into the charging case and close its lid. The earbuds will start charging automatically.

Charging Case

To charge the charging case, all you have to do is connect the case to a USB charger or charging port. It will start charging automatically.

What Do The Lights Mean?

Charging Case

• The light on the left end flashing with the earbuds inside: The left earbud is charging.
• The light on the right end flashing with the earbuds inside: The right earbud is charging.
• The light on the left end stops flashing with the earbuds inside: The left earbud is fully charged.
• The light on the right end stops flashing with the earbuds inside: The right earbud is fully charged.
• One light flashing while charging: The case has between 0% and 25% of battery.
• Two lights flashing while charging: The case has between 26% and 50% of battery.
• Three lights flashing while charging: The case has between 51% and 75% of battery.
• Four lights flashing while charging The case has between 76% and 100% of battery.
• The end left and right lights flash a couple of times while resetting: The earbuds are resetting.
• All the lights flash four times while resetting: The earbuds are resetting.

How To Reset And Re-Pair The Earbuds?

NOTE: Make sure that the earbuds are fully charged before starting the reset process.

Step 1: Open the lid of the charging case. After that, the earbuds will turn on automatically and pair with each other.

Step 2: Delete the Buds Solo earbuds from the devices’ Bluetooth list.

Step 3: Turn off Bluetooth on the device.

Step 4: Close the lid of the charging case. After that, the earbuds will turn off automatically.

Step 5: Open the lid of the charging case. After that, the earbuds will turn on automatically.

Step 6: Press and hold the button on the bottom of the charging case for about 10 seconds, and the end left and right lights will flash a couple of times.

Step 7: When all the lights flash four times, the resetting will be done and the earbuds will be ready to re-pair.

Step 8: Turn on Bluetooth on the desired device.

Step 9: Search for a new device.

Step 10: Select the Buds Solo earbuds. If a password is needed, type “0000”.  After that, the pairing will be done.

Some Common Problems & Troubleshooting

Left/Right/One side of the earbuds has stopped working

If this happens, it may be because it is low on battery or it did not connect correctly with the device. To fix this, you can do the following:

1. Try charging the earbud that is not working or both, placing them in the charging case.

2. Try factory resetting the earbuds.

3. Check if the earbuds are operating within a normal working range

If that doesn’t work, the earbud is probably faulty, and I can go for a refund or replacement of it.

Left/Right/One side of the earbuds has a low volume

If this happens, it may be because the earbuds are dirty or the volume is set low. To fix this, you can do the following:

1. Try cleaning the earbud using a cotton swab or carefully clean the mesh with a pin.

2. Try factory resetting the earbuds.

The microphone is not working

If this happens, it can be because the microphone is muted, or the earbuds are badly positioned. To fix this, you can do the following:

If the microphone is muted, check the device microphone volume. If that doesn’t work, that means that there might be a defect in the earbuds, so try replacing them or getting a refund.

The earbuds are not connecting to Windows/laptop/PC

If the earbuds are earbuds not connecting, it can be because the Bluetooth on the computer has a pairing problem. To fix this, you can do the following:

1. Try disabling Bluetooth from nearby devices >>> then activate the pairing mode of the earbuds, pair and connect earbuds from Settings >>> Bluetooth & other devices >>> Add a new device >>>> Select Bluetooth.

2. Try uninstalling and reinstalling the Bluetooth driver, or updating the Bluetooth driver. All can be done in Manage >>> Device Manager, reset earbuds (if available), and then repeat the step.

3. Try resetting the earbuds.

FAQs

We hope you now know how to operate the earbuds from the above Noise Buds Solo manual! Want to know anything about the earphones? Do not hesitate to ask in the comments section.