Noise Shots Neo Manual | Earbuds Guide & Troubleshooting

The Noise Shots Neo earbuds come with specs such as clear balanced sound on the 9mm speaker drivers, Bluetooth 5.0 that ensures lag-free conversations with no call drops up within a 10-meter radius, and backward compatible with previous Bluetooth versions up to 4.2, up to 18 hours of total battery life using the charging case, the IPX5 sweat and dust-proof certification, and much more. Learn how to use these earbuds using this Noise Shots Neo manual!

Noise Shots Neo Manual | Pairing & Charging Instructions

How To Wear These Earbuds?

Step 1: Take both earbuds out of the charging case.

Step 2: Identify the left and right earbuds.

Step 3: Choose the ear tips that best suit your ears.

Step 4: Insert the headphones into the inner canal of the ears.

Step 5: Rotate for the best possible comfort and best fit, and make sure that the microphone is pointing to the mouth.

How To Turn On And Off?

Turn On

Automatically: Open the lid of the charging case and take the earbuds out. After that, they will turn on automatically.

Turn Off

Automatically: Place the earbuds into the charging case. After that, the earbuds will turn off automatically.

How To Pair The Earbuds?

To Android Or iOS Devices

Step 1: Open the lid of the charging case and take the earbuds out. After that, they will turn on automatically turn on.

Step 2: Place the earbuds into the ear canal. The “TWS connected” voice prompt will sound, meaning that the earbuds are paired with each other.

When the “Pairing” voice prompt sounds, it means that the earbuds will be ready to pair with any device.

Step 3: Unlock the desired device.

Step 4: Go to the device’s settings.

Step 5: Turn on Bluetooth on the desired device.

Step 6: Search for a new device.

Step 7: Select the Noise Shots NEO earbuds. If a password is needed, type “0000”.  After that, the pairing will be done.

To Windows (PC)

Step 1: Turn on the Window’s Bluetooth.

Step 2: Go to the settings.

Step 3: Go to “Bluetooth and other devices”.

Step 4: Click on “Add device”.

Step 5: Click on Bluetooth.

Step 6: Open the lid of the charging case and take the earbuds out. After that, they will turn on automatically turn on.

Step 7: Place the earbuds into the ear canal. The “TWS connected” voice prompt will sound, meaning that the earbuds are paired with each other.

When the “Pairing” voice prompt sounds, it means that the earbuds will be ready to pair with any device.

Step 8: Select the Noise Shots NEO earbuds. If a password is needed, type “0000”.  After that, the pairing will be done.

How To Control These Earbuds? – Stereo Mode

• Play or pause a song: Press the multifunction touch button on any of the earbuds one time.
• Play the next song: While listening to music, press the multifunction touch button on the right earbud two times.
• Play the previous song: While listening to music, press the multifunction touch button on the left earbud two times.
• Turn the volume up: Press and hold the multifunction touch button on the right earbud.
• Turn the volume down: Press and hold the multifunction touch button on the left earbud.
• Answer an incoming call: Press the multifunction touch button on any of the earbuds one time.
• End a current call: Press the multifunction touch button on any of the earbuds one time.
• Reject an incoming call: Press and hold the multifunction touch button on any of the earbuds for about 3 seconds.
• Activate the voice assistant: Press the multifunction touch button on any of the earbuds three times.

How To Activate The Mono Mode?

To activate or deactivate the mono mode in these earbuds, all you have to do is pair the earbuds to the device and take out one of the earbuds from the charging case. It will start working by itself.

How To Charge The Earbuds?

Earbuds

To charge the earbuds, all you have to do is place them into the charging case. The earbuds will start charging automatically.

Charging Case

To charge the charging case, all you have to do is connect the case to a USB charger or charging port. It will start charging automatically.

The Earbuds’ Voice Prompts

• TWS connected: The earbuds are paired with each other.
• Pairing: The earbuds will be ready to pair with any device.

What Do The Lights Mean?

Earbuds

• A blue light flashes one time while resetting: The earbuds are resetting.

How To Reset And Re-Pair The Earbuds?

NOTE: Make sure that the earbuds are fully charged before starting the reset process.

Step 1: Delete the Noise Shots NEO earbuds from the devices’ Bluetooth list.

Step 2: Place the earbuds into the charging case and keep the lid open. After that, the earbuds will turn off automatically.

Step 3: Press and hold the multifunction touch button on both earbuds for about 5 seconds, until a blue light flashes one time.

The earbuds are reset successfully, and you can re-pair the earbuds to the desired device as shown in the pairing section.

Some Common Problems & Troubleshooting

Left/Right/One side of the earbuds has stopped working

If this happens, it may be because it is low on battery or it did not connect correctly with the device. To fix this, you can do the following:

1. Try charging the earbud that is not working or both, placing them in the charging case.

2. Try factory resetting the earbuds.

3. Check if the earbuds are operating within a normal working range

If that doesn’t work, the earbud is probably faulty, and I can go for a refund or replacement of it.

Left/Right/One side of the earbuds has a low volume

If this happens, it may be because the earbuds are dirty or the volume is set low. To fix this, you can do the following:

1. Try cleaning the earbud using a cotton swab or carefully clean the mesh with a pin.

2. Try factory resetting the earbuds.

The microphone is not working

If this happens, it can be because the microphone is muted, or the earbuds are badly positioned. To fix this, you can do the following:

If the microphone is muted, check the device microphone volume. If that doesn’t work, that means that there might be a defect in the earbuds, so try replacing them or getting a refund.

The earbuds are not connecting to Windows/laptop/PC

If the earbuds are earbuds not connecting, it can be because the Bluetooth on the computer has a pairing problem. To fix this, you can do the following:

1. Try disabling Bluetooth from nearby devices >>> then activate the pairing mode of the earbuds, pair and connect earbuds from Settings >>> Bluetooth & other devices >>> Add a new device >>>> Select Bluetooth.

2. Try uninstalling and reinstalling the Bluetooth driver, or updating the Bluetooth driver. All can be done in Manage >>> Device Manager, reset earbuds (if available), and then repeat the step.

3. Try resetting the earbuds.

FAQs

We hope you now know how to operate the earbuds from the above Noise Shots Neo manual! Want to know anything about the earphones? Do not hesitate to ask in the comments section.