Noise Shots X5 Manual | Pairing & Charging Guide

The Noise Shots X5 earbuds come with specs such as about 5 hours of battery life and a charging time of 3 hours, Bluetooth 5.0, up to 10 meters of working range, built-in microphones, extra-bass sound support, a huge 2200mAh battery on the charging case, the IPX5 sweat and dust-proof certification, and much more. Learn how to use these earbuds using this manual!

Noise Shots X5 Manual | Instructions & Troubleshooting

How To Wear These Earbuds?

Step 1: Take both earbuds out of the charging case.

Step 2: Identify the left and right earbuds.

Step 3: Choose the ear tips that best suit your ears.

Step 4: Insert the headphones into the inner canal of the ears.

Step 5: Rotate for the best possible comfort and best fit, and make sure that the microphone is pointing to the mouth.

How To Turn On And Off?

Turn On

Automatically: Open the lid of the charging case and take the earbuds out. After that, a white light will turn on in both earbuds, and they will turn on automatically.

Turn Off

Automatically: Place the earbuds into the charging case. After that, the earbuds will turn off automatically.

How To Pair The Earbuds? (Stereo Mode)

To Android Or iOS Devices

Step 1: Open the lid of the charging case and take the earbuds out. After that, a white light will turn on in both earbuds, they will turn on automatically and pair with each other.

When a white light starts flashing in one of the earbuds, it means that they will be ready to pair with any device.

Step 2: Unlock the desired device.

Step 3: Go to the device’s settings.

Step 4: Turn on Bluetooth on the desired device.

Step 5: Search for a new device.

Step 6: Select the NOISE SHOTS X5 earbuds. If a password is needed, type “0000”. After that, the pairing will be done.

To Windows (PC)

Step 1: Turn on the Window’s Bluetooth.

Step 2: Go to the settings.

Step 3: Go to “Bluetooth and other devices”.

Step 4: Click on “Add device”.

Step 5: Click on Bluetooth.

Step 6: Open the lid of the charging case and take the earbuds out. After that, a white light will turn on in both earbuds, they will turn on automatically and pair with each other.

When a white light starts flashing in one of the earbuds, it means that they will be ready to pair with any device.

Step 7: Select the NOISE SHOTS X5 earbuds. If a password is needed, type “0000”. After that, the pairing will be done.

How To Pair The Earbuds? (Mode Mode)

To Android Or iOS Devices

Step 1: Open the lid of the charging case and take one of the earbuds out. After that, the earbud will turn on.

When a white light starts flashing, it means that it will be ready to pair with any device.

Step 2: Unlock the desired device.

Step 3: Go to the device’s settings.

Step 4: Turn on Bluetooth on the desired device.

Step 5: Search for a new device.

Step 6: Select the SHOTS X5 Mono earbuds. If a password is needed, type “0000”. After that, the pairing will be done.

To Windows (PC)

Step 1: Turn on the Window’s Bluetooth.

Step 2: Go to the settings.

Step 3: Go to “Bluetooth and other devices”.

Step 4: Click on “Add device”.

Step 5: Click on Bluetooth.

Step 6: Open the lid of the charging case and take one of the earbuds out. After that, the earbud will turn on.

When a white light starts flashing, it means that it will be ready to pair with any device.

Step 7: Select the SHOTS X5 Mono earbuds. If a password is needed, type “0000”. After that, the pairing will be done.

How To Disconnect The Earbuds?

Usually, the earbuds will disconnect from the device and turn off when placed in the charging case. However, if that doesn’t happen, then do the following steps:

Step 1: Take both earbuds out of the charging case.

Step 2: Press and hold the multifunction touch button on both earbuds for a couple of seconds, until a couple of lights flash on the earbuds and turn off.

How To Control These Earbuds? – Stereo Mode

• Play or pause a song: Press the multifunction touch button on any of the earbuds one time.
• Play the next song: While listening to music, press and hold the multifunction touch button on the right earbud.
• Play the previous song: While listening to music, press and hold the multifunction touch button on the left earbud.
• Answer an incoming call: Press the multifunction touch button on any of the earbuds one time.
• End a current call: Press the multifunction touch button on any of the earbuds one time.
• Reject an incoming call: Press and hold the multifunction touch button on any of the earbuds.
• Activate the voice assistant: Press the multifunction touch button on any of the earbuds two times.

How To Activate The Mono Mode?

To activate or deactivate the mono mode in these earbuds, all you have to do is pair the earbuds to the device and take out one of the earbuds from the charging case. It will start working by itself.

How To Charge The Earbuds?

Earbuds

To charge the earbuds, all you have to do is place them into the charging case. The earbuds will start charging automatically.

Charging Case

To charge the charging case, all you have to do is connect the case to a USB charger or charging port. It will start charging automatically.

What Do The Lights Mean?

Earbuds

• A white light on in both earbuds: The earbuds turn on.
• A white light flashing in one of the earbuds: The earbuds will be ready to pair with any device.
• A couple of lights flash on the earbuds and turn off: The earbuds are disconnected.
• A light that does not go off completely from both earbuds: The earbuds are resetting.

How To Reset These Earbuds?

Before the resetting process, make sure that the charging case and the earbuds are fully charged.

Step 1: Delete all the NOISE SHOTS X5 or SHOTS X5 Mono earbuds pairing records from the connected device.

Step 2: Take the earbuds out of the charging case. They will turn on and enter pairing mode.

Step 3: Press the multifunction touch button on both earbuds three times at the same time.

Step 4: Press and hold the multifunction touch button on both earbuds, until the light does not go off completely from both earbuds.

Step 5: Place the earbuds into the charging case and keep the lid open.

Step 6: Take the earbuds out of the charging case.

Step 7: Quickly press the multifunction touch button on both earbuds three times. After that, a white light will start flashing in one of the earbuds, meaning that they will be ready to pair with any device.

After that, the resetting will be done.

Some Common Problems & Troubleshooting

Left/Right/One side of the earbuds has stopped working

If this happens, it may be because it is low on battery or it did not connect correctly with the device. To fix this, you can do the following:

1. Try charging the earbud that is not working or both, placing them in the charging case.

2. Try factory resetting the earbuds.

3. Check if the earbuds are operating within a normal working range

If that doesn’t work, the earbud is probably faulty, and I can go for a refund or replacement of it.

Left/Right/One side of the earbuds has a low volume

If this happens, it may be because the earbuds are dirty or the volume is set low. To fix this, you can do the following:

1. Try cleaning the earbud using a cotton swab or carefully clean the mesh with a pin.

2. Try factory resetting the earbuds.

The microphone is not working

If this happens, it can be because the microphone is muted, or the earbuds are badly positioned. To fix this, you can do the following:

If the microphone is muted, check the device microphone volume. If that doesn’t work, that means that there might be a defect in the earbuds, so try replacing them or getting a refund.

The earbuds are not connecting to Windows/laptop/PC

If the earbuds are earbuds not connecting, it can be because the Bluetooth on the computer has a pairing problem. To fix this, you can do the following:

1. Try disabling Bluetooth from nearby devices >>> then activate the pairing mode of the earbuds, pair and connect earbuds from Settings >>> Bluetooth & other devices >>> Add a new device >>>> Select Bluetooth.

2. Try uninstalling and reinstalling the Bluetooth driver, or updating the Bluetooth driver. All can be done in Manage >>> Device Manager, reset earbuds (if available), and then repeat the step.

3. Try resetting the earbuds.

FAQs

We hope you now know how to operate the earbuds from the above Noise Shots X5 manual! Want to know anything about the earphones? Do not hesitate to ask in the comments section.