Noise Shots X5 Pro Manual | Instructions & Troubleshooting

The Noise Shots X5 Pro earbuds come with specs such as the amazing IPX7 waterproof certification, a battery life of about 8 hours on a single charge + up to 150 hours using the charging case, a Qualcomm chipset inside to deliver superior sound quality, Bluetooth 5.0 with up to 10 meters of work range, 6-mm graphene speaker drivers, and much more. Learn how to use these earbuds using this manual!

Noise Shots X5 Pro Manual | Pairing & Charging Guide

How To Wear These Earbuds?

Step 1: Take both earbuds out of the charging case.

Step 2: Identify the left and right earbuds.

Step 3: Choose the ear tips that best suit your ears.

Step 4: Insert the headphones into the inner canal of the ears.

Step 5: Rotate for the best possible comfort and best fit, and make sure that the microphone is pointing to the mouth.

How To Turn On And Off?

Turn On

Automatically: Open the lid of the charging case and take the earbuds out. After that, a white light will turn on in both earbuds, and they will turn on automatically.

Turn Off

Automatically: Place the earbuds into the charging case. After that, the earbuds will turn off automatically.

How To Pair The Earbuds?

To Android Or iOS Devices

Step 1: Open the lid of the charging case and take the earbuds out. After that, a white light will turn on in both earbuds, they will turn on automatically and pair with each other.

When a white light starts flashing, it means that the earbuds will be ready to pair with any device.

Step 2: Unlock the desired device.

Step 3: Go to the device’s settings.

Step 4: Turn on Bluetooth on the desired device.

Step 5: Search for a new device.

Step 6: Select the Shots X5 Pro earbuds. If a password is needed, type “0000”.

Step 7: After connecting, a pairing prompt will pop up on the screen of the device asking to pair the second earbud. Select “Pair” to complete the process.

After that, the pairing will be done.

NOTE: This pairing process could happen in some devices. In some others, after selecting the earbuds, both will pair to the device.

To Windows (PC)

Step 1: Turn on the Window’s Bluetooth.

Step 2: Go to the settings.

Step 3: Go to “Bluetooth and other devices”.

Step 4: Click on “Add device”.

Step 5: Click on Bluetooth.

Step 6: Open the lid of the charging case and take the earbuds out. After that, a white light will turn on in both earbuds, they will turn on automatically and pair with each other.

When a white light starts flashing, it means that the earbuds will be ready to pair with any device.

Step 7: Select the Shots X5 Pro earbuds. If a password is needed, type “0000”.

Step 8: After connecting, a pairing prompt will pop up on the screen of the device asking to pair the second earbud. Select “Pair” to complete the process.

After that, the pairing will be done.

NOTE: This pairing process could happen in some devices. In some others, after selecting the earbuds, both will pair to the device.

How To Control These Earbuds? – Stereo Mode

• Play or pause a song: Press the multifunction touch button on any of the earbuds one time.
• Play the next song: While listening to music, press the multifunction touch button on the right earbud two times.
• Play the previous song: While listening to music, press the multifunction touch button on the right earbud two times.
• Turn the volume up: Press and hold the multifunction touch button on the right earbud.
• Turn the volume down: Press and hold the multifunction touch button on the left earbud.
• Answer an incoming call: Press the multifunction touch button on any of the earbuds one time.
• End a current call: Press the multifunction touch button on any of the earbuds one time.
• Reject an incoming call: Press and hold the multifunction touch button on any of the earbuds for about 2 seconds.
• Activate the voice assistant: Press the multifunction touch button on any of the earbuds three times.

How To Activate The Mono Mode?

To activate or deactivate the mono mode in these earbuds, all you have to do is pair the earbuds to the device and take out one of the earbuds from the charging case. It will start working by itself.

How To Charge The Earbuds?

Earbuds

To charge the earbuds, all you have to do is place them into the charging case. The earbuds will start charging automatically.

Charging Case

To charge the charging case, all you have to do is connect the case to a USB charger or charging port. It will start charging automatically.

What Do The Lights Mean?

Earbuds

• A white light on: The earbuds turn on.
• A white light flashing: The earbuds will be ready to pair with any device.
• A white and red light flashes while resetting: The earbuds are disconnected.

How To Reset These Earbuds?

Before the resetting process, make sure that the charging case and the earbuds are fully charged.

Step 1: Delete all the Shots X5 Pro earbuds pairing records from the connected device.

Step 2: Place the earbuds into the charging case and keep the lid open.

Step 3: Quickly press the multifunction touch button on both earbuds three times. A white and red light will flash.

Step 4: Take the earbuds out of the charging case. They will turn on and enter pairing mode.

After that, the resetting will be done and the earbuds will be ready to pair with any device.

Some Common Problems & Troubleshooting

Left/Right/One side of the earbuds has stopped working

If this happens, it may be because it is low on battery or it did not connect correctly with the device. To fix this, you can do the following:

1. Try charging the earbud that is not working or both, placing them in the charging case.

2. Try factory resetting the earbuds.

3. Check if the earbuds are operating within a normal working range

If that doesn’t work, the earbud is probably faulty, and I can go for a refund or replacement of it.

Left/Right/One side of the earbuds has a low volume

If this happens, it may be because the earbuds are dirty or the volume is set low. To fix this, you can do the following:

1. Try cleaning the earbud using a cotton swab or carefully clean the mesh with a pin.

2. Try factory resetting the earbuds.

The microphone is not working

If this happens, it can be because the microphone is muted, or the earbuds are badly positioned. To fix this, you can do the following:

If the microphone is muted, check the device microphone volume. If that doesn’t work, that means that there might be a defect in the earbuds, so try replacing them or getting a refund.

The earbuds are not connecting to Windows/laptop/PC

If the earbuds are earbuds not connecting, it can be because the Bluetooth on the computer has a pairing problem. To fix this, you can do the following:

1. Try disabling Bluetooth from nearby devices >>> then activate the pairing mode of the earbuds, pair and connect earbuds from Settings >>> Bluetooth & other devices >>> Add a new device >>>> Select Bluetooth.

2. Try uninstalling and reinstalling the Bluetooth driver, or updating the Bluetooth driver. All can be done in Manage >>> Device Manager, reset earbuds (if available), and then repeat the step.

3. Try resetting the earbuds.

FAQs

We hope you now know how to operate the earbuds from the above Noise Shots X5 Pro manual! Want to know anything about the earphones? Do not hesitate to ask in the comments section.