Home Audiophile Earbuds Manuals The Nothing Ear (1) comes with an 11,6mm dynamic driver, Hybrid Active Noise Cancellation, 3 high-definition microphones, AI-powered Environmental Noise Cancellation, a battery life of 34 hours using the charging case, the IPX4 dust and sweat-resistance certification, Bluetooth 5.2, and much more. Learn how to use them with this new Nothing Ear (1) Manual. If you are interested in purchasing these earbuds, you can easily do it using the Nothing official website. Also, if you want to give the original manual a look, you can do it here. What's Inside ToggleNothing Ear (1) Specs SheetNothing Ear (1) AccessoriesNothing Ear (1) Manual | Everything You Need To Know!How To Pair The Earbuds? How To Wear These Earbuds?How To Turn On And Off?How to Control? / How to Operate? – InstructionsHow To Activate ANC?How To Activate The Mono Mode?How To Charge The Earbuds? How To Reset These Earbuds?A Guide To Nothing Ear (1) APPSome Common Problems & TroubleshootingFAQs Nothing Ear (1) Specs Sheet ModelNothing Ear (1)WeightEarbuds: 4.7 grams each Charging case: 51 grams eachWaterproof/IP ratings IPX4Bluetooth version V5.2Range/Distance10 metersDriver11.6mmAudio DecodingSBC, AACConnectivity Port/Charging CableType-CSpeaker frequency response20Hz – 20kHzBattery Life Earbuds: About 4 hours (ANC on)/About 6 hours (ANC off) Charging case: About 30 hours (ANC on)/About 28 hours (ANC off)Charging Time Earbuds: About 1 hour Charging time: About 2 hoursApp Support Yes, Ear (1)Controls/Features Play or pause music, play the next song, turn the volume up and down, answer, end, or reject a call, ANCAccessories Charging case, user manual, USB cable, ear tipsPriceAbout 150 USD Nothing Ear (1) Accessories The earbuds come with the following accessories: Charging case. User manual. USB cable. Ear tips. Credits: Counterpoint Research Nothing Ear (1) Manual | Everything You Need To Know! How To Pair The Earbuds? To iOS and Android phones Step 1: Open the lid of the charging case, and press and hold the multifunction touch button on its side for 2 seconds. After that, the earbuds will turn on automatically. Step 2: Go to the device’s Bluetooth settings. Step 3: Select “Ear (1)”. If a password is needed, type “0000”. After that, the pairing will be done. To PC (Windows) Step 1: Turn on the Window’s Bluetooth. Step 2: Go to the settings. Step 3: Go to “Bluetooth and other devices”. Step 4: Click on “Add device”. Step 5: Click on Bluetooth. Step 6: Open the lid of the charging case, and press and hold the multifunction touch button on its side for 2 seconds. After that, the earbuds will turn on automatically. Step 7: Select “Ear (1)”. If a password is needed, type “0000”. After that, the pairing will be done. How To Wear These Earbuds? Step 1: Take both earbuds out of the charging case. Step 2: Identify the left and right earbuds. Step 3: Choose the ear tips that best suit your ears. Step 4: Insert the headphones into the inner canal of the ears. Step 5: Rotate for the best possible comfort and best fit, and make sure that the microphone is pointing to the mouth. How To Turn On And Off? Turn on: Open the lid of the charging case, and press and hold the multifunction touch button on its side for 2 seconds. After that, the earbuds will turn on automatically. Turn off: Place the earbuds into the charging case. After that, the earbuds will turn off automatically. How to Control? / How to Operate? – Instructions NOTE: The multifunction touch button is placed on the stem of the earbuds. Play or pause music: Press the multifunction touch button on any of the earbuds two times. Turn the volume up: Press and swipe up the multifunction touch button on any of the earbuds. Turn the volume down: Press and swipe down the multifunction touch button on any of the earbuds. Play the next song: Press the multifunction touch button on the right earbud three times. Answer an incoming call: Press the multifunction touch button on any of the earbuds two times. End a current call: Press and hold the multifunction touch button on any of the earbuds. Reject an incoming call: Press and hold the multifunction touch button on any of the earbuds for two seconds. How To Activate ANC? To activate or deactivate the mono mode in the Nothing Ear (1), all you have to do is to press and hold the multifunction touch button on any of the earbuds. How To Activate The Mono Mode? To activate or deactivate the mono mode in the Nothing Ear (1), all you have to do is to pair the earbuds to the device and take out one of the earbuds from the charging case. It will start working by itself. How To Charge The Earbuds? Earbuds To charge the earbuds, all you have to do is to place them into the charging case and close the lid. The earbuds will start charging automatically. Charging case To charge the charging case, all you have to do is to connect the case to a USB charger or charging port with the included USB-A to C cable. It will start charging automatically. How To Reset These Earbuds? Step 1: Enter your device’s Bluetooth settings and forget the Ear (1). Step 2: Place the earbuds into the charging case. Step 3: Press and hold the multifunction touch button on the side of the charging case for 30 seconds. Step 4: After that, the resetting will be done. A Guide To Nothing Ear (1) APP The Nothing Ear (1) can be used with an application, called Ear (1). This application is available in the Apple Store and in the Play Store for iOS and Android devices. When opening the application, the first thing we have to do is connect our earbuds, and it comes with different features: Not only can you see the connected device, but also the battery percentage of each of the earbuds. Also, the controls of each of the earbuds can be changed according to the user’s taste or needs. Also, this application has a special function, and it is “Find My Earbud“, for those cases where you do not know where your devices are. Finally, this application allows you to update the functions of the earbuds, so that they provide the best possible work. Some Common Problems & Troubleshooting Left/Right/One side of the earbuds has stopped working If this happens, it may be because it is low on battery or it did not connect correctly with the device. To fix this, you can do the following:See alsoEarFun Air 2 Manual | How Can You Use These Earbuds?Gines·April 12, 2024 1. Try charging the earbud that is not working or both, placing them in the charging case. 2. Try factory resetting the earbuds. 3. Check if the earbuds are operating within a normal working range If that doesn’t work, the earbud is probably faulty, and I can go for a refund or replacement of it. Left/Right/One side of the earbuds has a low volume If this happens, it may be because the earbuds are dirty or the volume is set low. To fix this, you can do the following: 1. Try cleaning the earbud using a cotton swab or carefully clean the mesh with a pin. 2. Try factory resetting the earbuds. The microphone is not working If this happens, it can be because the microphone is muted, or the earbuds are badly positioned. To fix this, you can do the following: If the microphone is muted, check the device microphone volume. If that doesn’t work, that means that there might be a defect in the earbuds, so try replacing them or getting a refund. The earbuds are not connecting to Windows/laptop/PC If the earbuds are earbuds not connecting, it can be because the Bluetooth on the computer has a pairing problem. To fix this, you can do the following: 1. Try disabling Bluetooth from nearby devices >>> then activate the pairing mode of the earbuds, pair and connect earbuds from Settings >>> Bluetooth & other devices >>> Add a new device >>>> Select Bluetooth. 2. Try uninstalling and reinstalling the Bluetooth driver, or updating the Bluetooth driver. All can be done in Manage >>> Device Manager, reset earbuds (if available), and then repeat the step. 3. Try resetting the earbuds. FAQs Are Nothing Ear (1) waterproof? No, they are not waterproof (IPX6). The Nothing Ear (1) have the IPX4 certification, which means they’re dustproof, splash, and sweat-resistant. Does Nothing Ear (1) have a microphone? Yes, the Nothing Ear (1) have integrated microphones. Do Nothing Ear (1) have low latency/gaming mode? No, the Nothing Ear (1) don’t have low latency/gaming mode. Can Nothing Ear (1) connect to PC and Laptop? Yes, the Nothing Ear (1) can connect to PCs, laptops, and tablets. We hope you now know how to operate the earbuds from the above Nothing Ear (1) Manual. Want to know anything about the earphones? Do not hesitate to ask in the comments section.