Nothing Ear (2) Manual | Step-by-step Earbuds Manual

The Nothing Ear (2) earbuds come with specs such as ANC and Transparency mode support, Bluetooth 5.3 with up to 10 meters of working range, a total battery life of 36 hours, 3 integrated microphones in each earbud, 11.6mm drivers, app support, the IPX4 sweat, and dust-proof certification, and much more. Learn how to use these earbuds using this Nothing Ear (2) manual!

If you are interested in purchasing these earbuds, you can easily do it using the Nothing official website. Also, if you want to give the original manual a look, you can do it here.

Nothing Ear (2) Specs Sheet

Model	Nothing Ear (2)
Weight	Earbuds: 4.5 grams each Charging case: 55.5 grams
Waterproof/IP ratings	IPX4
Bluetooth version	V5.3
Range/Distance	10 meters
Driver	11.6mm
Audio Decoding	SBC, AAC
Connectivity Port/Charging Cable	Type-C
Speaker frequency response	20Hz – 20kHz
Battery Life	Earbuds: About 4 hours (ANC on)/6.5 hours (ANC off) Charging case: About 22 hours (ANC on)/36 hours (ANC off)
Charging Time	Earbuds: About 1.5 hours Charging case: About 2.5 hours
App Support	Yes, Nothing X
Controls/Features	Play or pause music, play the next and previous song, answer, end, and reject a call, ANC, Transparency mode
Accessories	Charging case, user manual, USB cable, ear tips, safety information and warranty information
Price	About 150 USD

Nothing Ear (2) Accessories

The earbuds come with the following accessories:

• Charging case.
• User manual.
• USB cable.
• Ear tips.
• Safety information and warranty information.

Nothing Ear (2) Manual | Pairing & Charging

How to Pair The Earbuds?

To Android Devices

Step 1: Open the lid of the charging case. After that, the earbuds will turn on automatically.

Step 2: Turn on Bluetooth on the desired device.

Step 3: Go to the device’s Bluetooth settings.

Step 4: Select “Nothing Ear (2)”. If a password is needed, type “0000”.

After that, the pairing will be done.

To non-Android Devices And PC (Windows)

Step 1: Turn on Bluetooth on the desired device.

Step 2: Go to the device’s Bluetooth settings.

Step 3: Click on “Add device”.

Step 4: Open the lid of the charging case. After that, the earbuds will turn on automatically.

Step 5: Press and hold the setup button on the charging case for a couple of seconds, until a light starts flashing.

Step 6: Select “Nothing Ear (2)”. If a password is needed, type “0000”.

After that, the pairing will be done.

How to Wear These Earbuds?

Step 1: Take both earbuds out of the charging case.

Step 2: Identify the left and right earbuds.

Step 3: Choose the ear tips that best suit your ears.

Step 4: Insert the headphones into the inner canal of the ears.

Step 5: Rotate for the best possible comfort and best fit, and make sure that the microphone is pointing to the mouth.

How to Turn On And Off?

Turn on: Open the lid of the charging case. After that, the earbuds will turn on automatically.

Turn off: Place the earbuds into the charging case and close its lid. After that, the earbuds will turn off automatically.

How to Control These Earbuds? – Stereo Mode

NOTE: The multifunction force sensor is placed on the top part of the body of the earbuds.

• Play or pause the music: Press the multifunction force sensor on any of the earbuds one time.
• Auto-pause the music: Take the earbuds out of the ear canal.
• Auto-play the music: Place the earbuds back into the ear canal.
• Play the next song: Press the multifunction force sensor on any of the earbuds two times.
• Play the previous song: Press the multifunction force sensor on any of the earbuds three times.
• Answer an incoming call: Press the multifunction force sensor on any of the earbuds one time.
• End a current call: Press the multifunction force sensor on any of the earbuds one time.
• Reject an incoming call: Press the multifunction force sensor on any of the earbuds two times.
• Switch between Active Noise Cancelation and Transparency mode: Press and hold the multifunction force sensor on any of the earbuds.

How to Activate The Mono Mode?

To activate or deactivate the mono mode in these earbuds, all you have to do is to pair the earbuds to the device and take out one of the earbuds from the charging case. It will start working by itself.

How to Charge The Earbuds?

Earbuds

To charge the earbuds, all you have to do is to place them into the charging case and close the lid. The earbuds will start charging automatically.

Charging case

To charge the charging case, all you have to do is to connect the case to a USB charger or charging port. It will start charging automatically.

What Do The Lights Mean?

Charging case

• A light flashing while the button is pressed: The earbuds are ready to pair with any device.
• A white light on: The battery level is higher than 30%.
• A red light on: The battery level is lower than 30%.

A Guide To The Nothing Ear (2) APP

The Nothing Ear (2) earbuds have an app specially made for them, called Nothing X, which is available for iOS and Android devices. When connecting it to the respective earbuds, you will see the earbuds and the battery they have, as well as three specific options:

• Equaliser: Here, you can configure the sound that the earbuds emit, thanks to the use of specific configurations or configured as desired.
• Controls: In this option, the various controls that the earbuds have available can be configured, as well as changed, activated, or deactivated.
• Noise control: Due to the earbuds having ANC and Transparency mode support, in here, you will be able to activate or deactivate any of them, plus having the chance of configuring the ANC feature.
• Device settings: These are the general configurations of the earbuds, where you can activate or deactivate features, information about the earbuds, and tips and support provided by the company.

Some Common Problems & Troubleshooting

Left / Right / One side of the earbuds has stopped working

If this happens, it may be because it is low on battery or it did not connect correctly with the device. To fix this, you can do the following:

1. Try charging the earbud that is not working or both, placing them in the charging case.

2. Try factory resetting the earbuds.

3. Check if the earbuds are operating within a normal working range

If that doesn’t work, the earbud is probably faulty, and I can go for a refund or replacement of it.

Left / Right / One side of the earbuds has a low volume

If this happens, it may be because the earbuds are dirty or the volume is set low. To fix this, you can do the following:

1. Try cleaning the earbud using a cotton swab or carefully clean the mesh with a pin.

2. Try factory resetting the earbuds.

The microphone is not working

If this happens, it can be because the microphone is muted, or the earbuds are badly positioned. To fix this, you can do the following:

If the microphone is muted, check the device microphone volume. If that doesn’t work, that means that there might be a defect in the earbud, so try replacing them or get a refund.

The earbuds are not connecting to Windows/laptop/PC

If the earbuds are earbuds not connecting, it can be because the Bluetooth on the computer has a pairing problem. To fix this, you can do the following:

1. Try disabling Bluetooth from nearby devices >>> then activate the pairing mode of the earbuds, pair and connect earbuds from Settings >>> Bluetooth & other devices >>> Add a new device >>>> select Bluetooth.

2. Try uninstalling and reinstalling the Bluetooth driver, or updating the Bluetooth driver. All can be done in Manage >>> Device Manager, reset earbuds (if available), and then repeat the step.

3. Try resetting the earbuds.

FAQs

We hope you now know how to operate the earphone from the above Nothing Ear (2) manual! Want to know anything about the earphones? Do not hesitate to ask in the comments section.