Oladance OWS 1 Manual | Instructions & Troubleshooting

The Oladance OWS 1 earbuds come with specs such as Environmental Noise Cancellation support, the IPX4 dust and sweat certification, 16 hours of total battery life, Bluetooth 5.2, a working connection range of 10 meters, support for the SBC audio codec, and much more. Learn how to use these earbuds using this Oladance OWS 1 manual!

If you are interested in purchasing these earbuds, you can easily do it using the Amazon online store. Also, in case you are interested in giving the original manual a look, you can do it here.

Oladance OWS 1 Specs Sheet

Model	Oladance OWS 1
Dimensions	Earbuds: 58*40*20 mm Charging case: 130*48*26.5 mm
Weight	Earbuds: Around 12.7 grams per earbud Charging case: Around 60 grams
Waterproof/IP ratings	IPX4
Bluetooth version	V5.2
Range/Distance	10 meters
Connectivity Port/Charging Cable	Type-C
Audio Decoding	SBC
Driver	16.5mm
Speaker frequency response	20Hz – 20kHz
Battery Life	Earbuds and charging case: Around 16 hours
Charging Time	Earbuds: Around 2 hours Charging case: Around 2 hours
App Support	Yes, the Oladance app
Controls/Features	Play and pause a song, play the next and previous song, answer, end, and reject a call, voice assistant, turn the volume up and down
Accessories	Charging case, USB cable, user manual, Earbuds supporter
Price	Around 130 USD

Oladance OWS 1 Accessories

The earbuds come with the following accessories:

• Charging case.
• USB cable.
• User manual.
• Earbuds supporter.

Oladance OWS 1 Manual | User Step-by-step Guide

How To Clear The Pairing List?

Step 1: Delete all pairing records from the Oladance OWS 1 earbuds on the connected device.

Step 2: Take the earbuds out of the case.

Step 3: Press and hold the touch area on both earbuds for about 5 seconds. This will clear the Bluetooth pairing list from the earbuds.

How To Charge The Earbuds?

Earbuds

To charge the earbuds, all you have to do is place them into the charging case and close its lid. The earbuds will start charging automatically.

Charging Case

To charge the charging case, all you have to do is connect the case to a USB charger or charging port. It will start charging automatically.

How To Turn On And Off?

Turn On

Automatically: Open the lid of the charging case. After that, the earbuds will turn on automatically.

Turn Off

Automatically: Place the earbuds into the charging case and close its lid. After that, the earbuds will turn off automatically.

How To Wear These Earbuds?

Step 1: Take both earbuds out of the charging case.

Step 2: Identify the left and right earbuds.

Step 3: Rotate the earbuds along the ear curve for the best possible comfort.

Step 4: Check the fit.

How To Pair The Earbuds?

To Android And iOS Devices

Step 1: Open the lid of the charging case. After that, the earbuds will turn on automatically and pair with each other.

The earbuds will now be ready to pair.

NOTE: If the earbuds don’t enter pairing mode automatically, then press and hold the touch area on both earbuds for about 2 seconds.

Step 2: Unlock the desired device.

Step 3: Go to the device’s settings.

Step 4: Turn on Bluetooth on the desired device.

Step 5: Search for a new device.

Step 6: Select the Oladance OWS 1 earbuds. If a password is needed, type “0000” or “1234”.

After that, the pairing will be done.

To Windows (PC)

Step 1: Turn on the Window’s Bluetooth.

Step 2: Go to the settings.

Step 3: Go to “Bluetooth and other devices”.

Step 4: Click on “Add device”.

Step 5: Click on Bluetooth.

Step 6: Open the lid of the charging case. After that, the earbuds will turn on automatically and pair with each other.

The earbuds will now be ready to pair.

NOTE: If the earbuds don’t enter pairing mode automatically, then press and hold the touch area on both earbuds for about 2 seconds.

Step 7: Select the Oladance OWS 1 earbuds. If a password is needed, type “0000” or “1234”.

After that, the pairing will be done.

How To Control These Earbuds?

NOTE: The touch area is placed on the middle part of the body of the earbuds.

• Play and pause a song: Press the touch area on any of the earbuds one time.
• Play the next song: Press the touch area on the right earbud two times.
• Play the previous song: Press the touch area on the left earbud two times.
• Turn the volume up: Swipe forward the touch area on any of the earbuds.
• Turn the volume down: Swipe down the touch area on any of the earbuds.
• Answer an incoming call: Press the touch area on any of the earbuds one time.
• End a current call: Press the touch area on any of the earbuds two times.
• Reject an incoming call: Press the touch area on any of the earbuds two times.
• Activate the voice assistant: Press the touch area on any of the earbuds three times.

Do These Earbuds Have An App?

Yes, these earbuds come with a specialized app called Oladance, available for Android and iOS devices. After pairing the earbuds to the app, you will be able to see the battery percentage of both of them, and there will be a couple of features:

The earbuds controls can be configured, both for music playback and calls. Likewise, you can change and even customize the sound effects as needed. Finally, you can configure the earbuds in a general way, as well as obtain a user guide and customer service.

Some Common Problems & Troubleshooting

Left/Right/One side of the earbuds has stopped working

If this happens, it may be because it is low on battery or it did not connect correctly with the device. To fix this, you can do the following:

1. Try charging the earbud that is not working or both, placing them in the charging case.

2. Try factory resetting the earbuds.

3. Check if the earbuds are operating within a normal working range.

If that doesn’t work, the earbud is probably faulty, and I can go for a refund or replacement of it.

Left/Right/One side of the earbuds has a low volume

If this happens, it may be because the earbuds are dirty or the volume is set low. To fix this, you can do the following:

1. Try cleaning the earbud using a cotton swab or carefully clean the mesh with a pin.

2. Try factory resetting the earbuds.

The microphone is not working

If this happens, it can be because the microphone is muted, or the earbuds are badly positioned. To fix this, you can do the following:

If the microphone is muted, check the device microphone volume. If that doesn’t work, that means that there might be a defect in the earbuds, so try replacing them or getting a refund.

The earbuds are not connecting to Windows/laptop/PC

If the earbuds are not connecting, it can be because the Bluetooth on the computer has a pairing problem. To fix this, you can do the following:

1. Try disabling Bluetooth from nearby devices >>> then activate the pairing mode of the earbuds, pair and connect earbuds from Settings >>> Bluetooth & other devices >>> Add a new device >>>> Select Bluetooth.

2. Try uninstalling and reinstalling the Bluetooth driver, or updating the Bluetooth driver. All can be done in Manage >>> Device Manager, reset earbuds (if available), and then repeat the step.

3. Try resetting the earbuds.

FAQs

We hope you now know how to operate the earbuds from the above Oladance OWS 1 manual. Want to know anything about the earbuds? Do not hesitate to ask in the comment section below.