PALOVUE EarSound Manual | All You Need To Know

The PALOVUE EarSound earbuds come with specs such as a very light weight of only 4 grams per earbud, 38 hours of total battery life, Bluetooth 5.3 with 10 meters of connection range, the IPX4 dust and sweat certification, support for the SBC and AAC codecs, and much more. Learn how to use these earbuds using this PALOVUE EarSound manual!

If you are interested in purchasing these earbuds, you can easily do it using the Amazon online store. Also, in case you are interested in giving the original manual a look, you can do it here.

PALOVUE EarSound Specs Sheet

Model	PALOVUE EarSound
Dimensions	Earbuds: 24.82*17.79*19.9mm Charging case: 71.98*Ø33.39mm
Weight	Earbuds: About 4 grams each Charging case: Around 28 grams
Waterproof/IP ratings	IPX4
Bluetooth version	V5.3
Range/Distance	10 meters
Connectivity Port/Charging Cable	Type-C
Audio Decoding	SBC, AAC
Driver	6mm
Speaker frequency response	20Hz – 20kHz
Battery Life	Earbuds: Around 6 hours Charging case: Around 32 hours
Charging Time	Earbuds: Around 1.5 hours Charging case: Around 2 hours
App Support	No
Controls/Features	Play and pause a song, play the next and previous song, answer, end, and reject a call, turn the volume up and down, voice assistant
Accessories	Charging case, USB cable, user manual, ear tips
Price	Around 15 USD

PALOVUE EarSound Accessories

The earbuds come with the following accessories:

• Charging case.
• USB cable.
• User manual.
• Ear tips.

PALOVUE EarSound Manual | How Can You Use These Earbuds?

How To Pair The Earbuds?

To Android And iOS Devices

Step 1: Open the lid of the charging case and take the earbuds out. After that, the earbuds will turn on automatically and pair with each other.

The earbuds will be ready to pair with any device.

Step 2: Unlock the desired device.

Step 3: Go to the device’s settings.

Step 4: Turn on Bluetooth on the desired device.

Step 5: Search for a new device.

Step 6: Select the PALOVUE EarSound earbuds. If a password is needed, type “0000” or “1234”.

After that, the “Connected” voice prompt will sound, and the pairing will be done.

To Windows (PC)

Step 1: Turn on the Window’s Bluetooth.

Step 2: Go to the settings.

Step 3: Go to “Bluetooth and other devices”.

Step 4: Click on “Add device”.

Step 5: Click on Bluetooth.

Step 6: Open the lid of the charging case and take the earbuds out. After that, the earbuds will turn on automatically and pair with each other.

The earbuds will be ready to pair with any device.

Step 7: Select the PALOVUE EarSound earbuds. If a password is needed, type “0000” or “1234”.

After that, the “Connected” voice prompt will sound, and the pairing will be done.

How To Control These Earbuds?

NOTE: The multifunction touch sensor is placed on the middle part of the body of the earbuds.

• Play and pause a song: Press the multifunction touch sensor on any of the earbuds two times.
• Play the next song: Press and hold the multifunction touch sensor on the right earbud for about 1.5 seconds.
• Play the previous song: Press and hold the multifunction touch sensor on the right earbud for about 1.5 seconds.
• Turn the volume up: Press the multifunction touch sensor on the right earbud one time.
• Turn the volume down: Press the multifunction touch sensor on the left earbud one time.
• Answer an incoming call: Press the multifunction touch sensor on any of the earbuds two times.
• End a current call: Press the multifunction touch sensor on any of the earbuds two times.
• Reject an incoming call: Press and hold the multifunction touch sensor on any of the earbuds for about 1.5 seconds.
• Activate the voice assistant: Press the multifunction touch sensor on any of the earbuds three times.

How to Reset The Earbuds?

Step 1: Delete all pairing information about the PALOVUE EarSound earbuds.

Step 2: Place the earbuds into the case and keep the lid open.

Step 3: Press and hold the multifunction touch sensor on both earbuds for about 10 seconds, or until a red light flashes for about 5 seconds.

This will reset the earbuds.

Step 4: Take the earbuds out of the case. A red and green light will start flashing and the earbuds will enter pairing mode.

How To Charge The Earbuds?

Earbuds

To charge the earbuds, all you have to do is place them into the charging case. The earbuds will start charging automatically.

Charging Case

To charge the charging case, all you have to do is connect the case to a USB charger or charging port. It will start charging automatically.

What Do The Lights Mean?

Earbuds

• A red light while on the charging case: The earbuds are charging.
• A red light flashes for about 5 seconds: The earbuds are resetting.
• A red and green light flashes: The earbuds are resetting.

Charging Case

• A blue light flashes slowly while charging: The case is charging.
• A blue light on while charging: The case is fully charged.
• A red light flashes slowly for 4 seconds when the earbuds are placed inside: The case has a low battery level.

How To Wear These Earbuds?

Step 1: Take both earbuds out of the charging case.

Step 2: Identify the left and right earbuds.

Step 3: Choose the ear tips that best suit your ears.

Step 4: Insert the headphones into the inner canal of the ears.

Step 5: Rotate for the best possible comfort and best fit, and make sure that the microphone is pointing to the mouth.

How To Turn On And Off?

Turn On

Automatically: Open the lid of the charging case and take the earbuds out. After that, the earbuds will turn on automatically.

Manually: Press and hold the multifunction touch sensor on both earbuds for about 3 seconds. After that, the earbuds will turn on automatically.

Turn Off

Automatically: Place the earbuds into the charging case. After that, the earbuds will turn off automatically.

How to Activate The Mono Mode?

To activate or deactivate the mono mode in these earbuds, all you have to do is pair the earbuds to the device and take out one of the earbuds from the charging case. It will start working by itself.

Do These Earbuds Have An App?

No, these earbuds don’t come with app support.

Some Common Problems & Troubleshooting

Left/Right/One side of the earbuds has stopped working

If this happens, it may be because it is low on battery or it did not connect correctly with the device. To fix this, you can do the following:

1. Try charging the earbud that is not working or both, placing them in the charging case.

2. Try factory resetting the earbuds.

3. Check if the earbuds are operating within a normal working range.

If that doesn’t work, the earbud is probably faulty, and I can go for a refund or replacement of it.

Left/Right/One side of the earbuds has a low volume

If this happens, it may be because the earbuds are dirty or the volume is set low. To fix this, you can do the following:

1. Try cleaning the earbud using a cotton swab or carefully clean the mesh with a pin.

2. Try factory resetting the earbuds.

The microphone is not working

If this happens, it can be because the microphone is muted, or the earbuds are badly positioned. To fix this, you can do the following:

If the microphone is muted, check the device microphone volume. If that doesn’t work, that means that there might be a defect in the earbuds, so try replacing them or getting a refund.

The earbuds are not connecting to Windows/laptop/PC

If the earbuds are not connecting, it can be because the Bluetooth on the computer has a pairing problem. To fix this, you can do the following:

1. Try disabling Bluetooth from nearby devices >>> then activate the pairing mode of the earbuds, pair and connect earbuds from Settings >>> Bluetooth & other devices >>> Add a new device >>>> Select Bluetooth.

2. Try uninstalling and reinstalling the Bluetooth driver, or updating the Bluetooth driver. All can be done in Manage >>> Device Manager, reset earbuds (if available), and then repeat the step.

3. Try resetting the earbuds.

FAQs

We hope you now know how to operate the earbuds from the above PALOVUE EarSound manual. Want to know anything about the earbuds? Do not hesitate to ask in the comment section below.