We have filtered some of the best Amazon Black Friday Deals, click here to read!
Philips-T3215-Manual-6

Philips T3215 Manual | Pairing & Charging Instructions 2022

The Philips T3215 have a battery time of about 6 hours + 18 using the charging case, Bluetooth 5.1, the IPX4 sweat-proof certification, HSP, A2DP, and AVRCP compatibility, a working range of about 10 meters, and more. Learn how to use them with this new Philips T3215 Manual.

Philips T3215 Manual | Pairing & Charging Guide

Philips T3215 Manual | How to Pair / Connect?

To iOS and Android phones

Step 1: Open the lid of the charging case and take the earbuds out. After that, a “Power on” voice prompt will sound, a white light will flash two times, and the earbuds will turn on automatically. Also, you can press and hold the multifunction touch button on both earbuds for about 5 seconds.

Later, a “Right channel” voice prompt will sound on the right earbud, and a “Left channel” voice prompt will sound on the left earbud, so they pair with each other. When a “Pairing” voice prompt sounds and a white and blue light starts flashing on the earbuds, that means that they will be ready to pair with any device.

Step 2: Turn on Bluetooth on the desired device.

Step 3: Go to the device’s Bluetooth settings.

Step 4: Select “Philips TAT3215”. If a password is needed, type “0000”.

Step 5: After that, a “Connected” voice prompt will sound, a white light will be on the earbuds for 5 seconds, and the pairing will be done.

To PC (Windows)

Step 1: Turn on Bluetooth on the desired device.

Step 2: Go to the settings.

Step 3: Go to “Bluetooth and other devices”.

Step 4: Click on “Add device”.

Step 5: Open the lid of the charging case and take the earbuds out. After that, a “Power on” voice prompt will sound, a white light will flash two times, and the earbuds will turn on automatically. Also, you can press and hold the multifunction touch button on both earbuds for about 5 seconds.

Later, a “Right channel” voice prompt will sound on the right earbud, and a “Left channel” voice prompt will sound on the left earbud, so they pair with each other. When a “Pairing” voice prompt sounds and a white and blue light starts flashing on the earbuds, that means that they will be ready to pair with any device.

Step 6: Select “Philips TAT3215”. If a password is needed, type “0000”.

Step 7: After that, a “Connected” voice prompt will sound, a white light will be on the earbuds for 5 seconds, and the pairing will be done.

Philips-T3215-Manual-1
Credits: Philips

Philips T3215 Manual | How to Wear?

Step 1: Take both earbuds out of the charging case.

Step 2: Identify the left and right earbuds.

Step 3: Choose the ear tips that best suit your ears.

Step 4: Insert the headphones into the inner canal of the ears.

Step 5: Rotate for the best possible comfort and best fit, and make sure that the microphone is pointing to the mouth.

Philips T3215 Manual | How to Turn On and Off?

Turn on: Open the lid of the charging case and take the earbuds out. After that, a “Power on” voice prompt will sound, a white light will flash two times, and the earbuds will turn on automatically. Also, you can press and hold the multifunction touch button on both earbuds for about 5 seconds.

Turn off: Place the earbuds into the charging case. After that, the earbuds will turn off automatically. Also, you can press and hold the multifunction touch button on both earbuds for about 5 seconds.

Philips-T3215-Manual-2
Credits: Philips

How to Control? / How to Operate? – Instructions

  • Play or pause music: Press the multifunction touch button on any of the earbuds one time.
  • Play the next song: Press and hold the multifunction touch button on the right earbud for 2 seconds.
  • Play the previous song: Press and hold the multifunction touch button on the left earbud for 2 seconds.
  • Answer an incoming call: Press the multifunction touch button on any of the earbuds one time.
  • End a current call: Press the multifunction touch button on any of the earbuds two times.
  • Reject an incoming call: Press and hold the multifunction touch button on any of the earbuds for 2 seconds.
  • Switch caller during a call: Press and hold the multifunction touch button on any of the earbuds for 2 seconds.
  • Activate the voice assistant: Press the multifunction touch button on any of the earbuds two times.

Philips T3215 Manual | How to Activate Mono Mode?

To activate or deactivate the mono mode in these earbuds, all you have to do is to pair the earbuds to the device and take out one of the earbuds from the charging case. It will start working by itself.

Philips-T3215-Manual-3
Credits: Philips

Philips T3215 Manual | How to Charge?

Earbuds

To charge the earbuds, all you have to do is to place them into the charging case and close the lid. The earbuds will start charging automatically.

Charging case

To charge the charging case, all you have to do is to connect the case to a USB charger or charging port with the included USB-A to C cable. It will start charging automatically.

Philips T3215 Manual | How to Reset?

Step 1: Delete all “Philips TAT3215” pairing information from the connected device.

Step 2: Turn off the Bluetooth feature on the connected device.

Step 3: Place both earbuds into the charging case and keep the lid open.

Step 4: Press and hold the multifunction touch button on both earbuds for about 5 seconds.

Step 5: Take the earbuds out of the charging case. After that, the resetting will be done.

Philips-T3215-Manual-4
Credits: Philips

Philips T3215 Manual | LED Light Status

Earbuds

  • A white light flashes two times: The earbuds turn on.
  • A white and blue light flashing: The earbuds are ready to pair with any device.
  • A white light is on for 5 seconds: The earbuds are connected.
  • A white light flashes two times every 3 minutes: The earbuds have a low battery.
  • A white light on while on the charging case: The earbuds are charging.
  • Said white light turns off while on the charging case: The earbuds are fully charged.

Charging case

  • One light on: The case has between 0% and 25% of battery.
  • Two lights on: The case has between 25% and 50% of battery.
  • Three lights on: The case has between 50% and 75% of battery.
  • Four lights on: The case has between 75% and 100% of battery.

Philips T3215 Manual | Voice Prompts

  • “Power on”: The earbuds turn on.
  • “Right channel” and “Left channel”: The earbuds are paired with each other.
  • “Pairing”: The earbuds are ready to pair with any device.
  • “Connected”: The earbuds are connected to the device.
Philips-T3215-Manual-5
Credits: Philips

Some Common Earbuds Problems & Troubleshooting

Left / Right / One side of the earbuds have stopped working

If this happens, it may be because it is low on battery or it did not connect correctly with the device. To fix this, you can do the following:

1. Try charging the earbud that is not working or both, placing them in the charging case.

2. Try factory resetting the earbuds.

3. Check if the earbuds are operating within a normal working range

If that doesn’t work, the earbud is probably faulty, and I can go for a refund or replacement of it.

Left / Right / One side of the earbuds has a low volume

If this happens, it may be because the earbuds are dirty or the volume is set low. To fix this, you can do the following:

1. Try cleaning the earbud using a cotton swab or carefully clean the mesh with a pin.

2. Try factory resetting the earbuds.

The microphone is not working

If this happens, it can be because the microphone is muted, or the earbuds are badly positioned. To fix this, you can do the following:

If the microphone is muted, check the device microphone volume. If that doesn’t work, that means that there might be a defect in the earbud, so try replacing them or get a refund.

The earbuds are not connecting to Windows/laptop/PC

If the earbuds are earbuds not connecting, it can be because the Bluetooth on the computer has a pairing problem. To fix this, you can do the following:

1. Try disabling Bluetooth from nearby devices >>> then activate pairing mode of the earbuds, pair and connect earbuds from Settings >>> Bluetooth & other devices >>> Add a new device >>>> elect Bluetooth,

2. Try uninstalling and reinstalling the Bluetooth driver, or updating the Bluetooth driver. All can be done in Manage >>> Device Manager, reset earbuds (if available), and then repeat the step.

3. Try resetting the earbuds.

Philips-T3215-Manual-6
Credits: Philips

FAQs

Are the Philips T3215 waterproof?

No, the Philips T3215 are not waterproof (IPX6 and up). They have a rating of IPX4, which means they’re splash and sweat-resistant.

Do the Philips T3215 have a microphone?

Yes, the earbuds come with integrated microphones.

Do the Philips T3215 have a low latency/gaming mode?

No, these earbuds don’t have a low latency/gaming mode.

Can the Philips T3215 connect to PC and Laptop?

Yes, these earbuds can connect to PCs, laptops, and even tablets.

Are the Philips T3215 noise-canceling?

No! These earbuds don’t come with noise cancellation technology.

How to know when the Philips T3215 are fully charged?

When the earbuds are charging, a white light is on. When fully charged, the light turns off.

We hope you now know how to operate the earphone from the above Philips T3215 Manual. Want to know anything about the earphones? Do not hesitate to ask in the comments section.