PocBuds N35 Manual | Guide & Troubleshooting

The PocBuds N35 earbuds come with specs such as one 11mm driver built-in on each earbud, the SBC audio codec, Bluetooth 5.3 with a working connection range of 10 meters and A2DP1.3/AVCTP1.4/AVDTP1.3/HFP1.8/HSP2.2 support, waterproof IPX7 certification, 8 hours of total playtime, and much more. Learn how to use these earbuds using this PocBuds N35 manual!

If you are interested in purchasing these earbuds, you can easily do it using the Amazon online store. Also, in case you are interested in giving the original manual a look, you can do it here.

PocBuds N35 Specs Sheet

Model	PocBuds N35
Weight	Earbuds: Around 4 grams each
Waterproof/IP ratings	IPX7
Bluetooth version	V5.3
Range/Distance	10 meters
Connectivity Port/Charging Cable	Type-C
Audio Decoding	SBC
Driver	11mm
Speaker frequency response	20Hz – 20kHz
Battery Life	Earbuds: Around 8 hours
Charging Time	Earbuds: Around 1 hour Charging case: Around 1.5 hours
App Support	No
Controls/Features	Play and pause a song, play the next and previous song, answer, end, and reject a call, voice assistant, turn the volume up and down
Accessories	Charging case, USB cable, user manual, ear tips
Price	Around 25 USD

PocBuds N35 Accessories

The earbuds come with the following accessories:

• Charging case.
• USB cable.
• User manual.
• Ear tips.

PocBuds N35 Manual | All You Need To Know

How To Control These Earbuds?

NOTE: The multifunction touch button is placed on the upper part of the body of the earbuds, and the “+” and “-“ buttons are on the side of the body.

• Play and pause a song: Press the multifunction touch button on any of the earbuds one time.
• Turn the volume up: Press the “+” button on any of the earbuds.
• Turn the volume down: Press the “-” button on any of the earbuds.
• Play the next song: Press the multifunction touch button on the right earbud two times.
• Play the previous song: Press the multifunction touch button on the left earbud two times.
• Answer an incoming call: Press the multifunction touch button on any of the earbuds one time.
• End a current call: Press the multifunction touch button on any of the earbuds one time.
• Reject an incoming call: Press and hold the multifunction touch button on the left earbud for about 2 seconds.
• Activate the voice assistant: Press the multifunction touch button on any of the earbuds three times.

How To Reset And Re-Pair These Earbuds?

Step 1: Delete the N35 earbuds from the devices’ Bluetooth list.

Step 2: Turn off Bluetooth.

Step 3: Take the earbuds out of the charging case.

Step 4: Press the multifunction touch button on both earbuds five times. This will reset the earbuds.

Step 5: Place the earbuds into the charging case.

Step 6: Take the earbuds out of the case again. After that, the “Power on” voice prompt will sound, and the earbuds will turn on automatically and pair with each other.

A red and blue light will start flashing in one of the earbuds, and they will be ready to pair.

Step 7: Turn on Bluetooth.

Step 8: Search for a new device.

Step 9: Select the N35 earbuds. If a password is needed, type “0000” or “1234”.

After that, the “Connected” voice prompt will sound, the flashing light will turn off, and the pairing will be done.

How To Charge The Earbuds?

Earbuds

To charge the earbuds, all you have to do is place them into the charging case and close its lid. The earbuds will start charging automatically.

Charging Case

To charge the charging case, all you have to do is connect the case to a USB charger or charging port. It will start charging automatically. Also, it can be charged using a wireless charger.

What Do The Lights Mean?

Earbuds

• A red and blue light flashes in one of the earbuds: The earbuds are ready to pair.
• Said flashing light turns off: The earbuds are connected.
• A red light on while on the charging case: The earbuds are charging.
• Said light turns off while on the charging case: The earbuds are fully charged.

Charging Case

• 0 to 99 appears on the display while charging: The case is charging.
• A 100 appears on the display while charging: The case is fully charged.
• Flashing up and down design with the earbuds inside: The earbuds are charging.
• Said flashing lights stay on with the earbuds inside: The earbuds are fully charged.

How To Wear These Earbuds?

Step 1: Take both earbuds out of the charging case.

Step 2: Identify the left and right earbuds.

Step 3: Choose the ear tips that best suit your ears.

Step 4: Insert the headphones into the inner canal of the ears.

Step 5: Rotate for the best possible comfort and best fit, and make sure that the microphone is pointing to the mouth.

How To Turn On And Off?

Turn On

Automatically: Open the lid of the charging case and take the earbuds out. After that, the “Power on” voice prompt will sound, and the earbuds will turn on automatically.

Manually: Press and hold the multifunction touch button on both earbuds for about 2 seconds. After that, the earbuds will turn on.

Turn Off

Automatically: Place the earbuds into the charging case. After that, the earbuds will turn off automatically.

Manually: Press and hold the multifunction touch button on both earbuds for about 5 seconds. After that, the earbuds will turn off.

How To Pair The Earbuds?

To Android And iOS Devices

Step 1: Open the lid of the charging case and take the earbuds out. After that, the “Power on” voice prompt will sound, and the earbuds will turn on automatically and pair with each other.

A red and blue light will start flashing in one of the earbuds, and they will be ready to pair.

Step 2: Unlock the desired device.

Step 3: Go to the device’s settings.

Step 4: Turn on Bluetooth on the desired device.

Step 5: Search for a new device.

Step 6: Select the N35 earbuds. If a password is needed, type “0000” or “1234”.

After that, the “Connected” voice prompt will sound, the flashing light will turn off, and the pairing will be done.

To Windows (PC)

Step 1: Turn on the Window’s Bluetooth.

Step 2: Go to the settings.

Step 3: Go to “Bluetooth and other devices”.

Step 4: Click on “Add device”.

Step 5: Click on Bluetooth.

Step 6: Open the lid of the charging case and take the earbuds out. After that, the “Power on” voice prompt will sound, and the earbuds will turn on automatically and pair with each other.

A red and blue light will start flashing in one of the earbuds, and they will be ready to pair.

Step 7: Select the N35 earbuds. If a password is needed, type “0000” or “1234”.

After that, the “Connected” voice prompt will sound, the flashing light will turn off, and the pairing will be done.

The Earbuds’ Voice Prompts

• Power on: The earbuds turn on.
• Connected: The earbuds are now connected.

Do These Earbuds Have An App?

No, these earbuds don’t come with app support.

Some Common Problems & Troubleshooting

Left/Right/One side of the earbuds has stopped working

If this happens, it may be because it is low on battery or it did not connect correctly with the device. To fix this, you can do the following:

1. Try charging the earbud that is not working or both, placing them in the charging case.

2. Try factory resetting the earbuds.

3. Check if the earbuds are operating within a normal working range.

If that doesn’t work, the earbud is probably faulty, and I can go for a refund or replacement of it.

Left/Right/One side of the earbuds has a low volume

If this happens, it may be because the earbuds are dirty or the volume is set low. To fix this, you can do the following:

1. Try cleaning the earbud using a cotton swab or carefully clean the mesh with a pin.

2. Try factory resetting the earbuds.

The microphone is not working

If this happens, it can be because the microphone is muted, or the earbuds are badly positioned. To fix this, you can do the following:

If the microphone is muted, check the device microphone volume. If that doesn’t work, that means that there might be a defect in the earbuds, so try replacing them or getting a refund.

The earbuds are not connecting to Windows/laptop/PC

If the earbuds are not connecting, it can be because the Bluetooth on the computer has a pairing problem. To fix this, you can do the following:

1. Try disabling Bluetooth from nearby devices >>> then activate the pairing mode of the earbuds, pair and connect earbuds from Settings >>> Bluetooth & other devices >>> Add a new device >>>> Select Bluetooth.

2. Try uninstalling and reinstalling the Bluetooth driver, or updating the Bluetooth driver. All can be done in Manage >>> Device Manager, reset earbuds (if available), and then repeat the step.

3. Try resetting the earbuds.

FAQs

We hope you now know how to operate the earbuds from the above PocBuds N35 manual. Want to know anything about the earbuds? Do not hesitate to ask in the comment section below.