PocBuds-X1-Manual-7

PocBuds X1 Manual | How Can You Use These Earbuds?

The PocBuds X1 earbuds come with specs such as a total battery life of up to 72 hours using the charging case, Bluetooth 5.3 with a working range of about 10 meters, the amazing IPX7 waterproof certification, 13mm drivers and built-in microphones in each earbud, support for the SBC audio codec, and much more. Learn how to use these earbuds using this PocBuds X1 manual!

If you are interested in purchasing these earbuds, you can easily do it using the Amazon online store. Also, in case you are interested in giving the original manual a look, you can do it here.

PocBuds X1 Specs Sheet

ModelPocBuds X1
WeightEarbuds and charging case: Around 43 grams
Waterproof/IP ratings  IPX7
Bluetooth version          V5.3
Range/Distance10 meters
Connectivity Port/Charging CableType-C
Audio Decoding               SBC
Driver  13mm
Speaker frequency response20Hz – 20kHz
Battery Life       Earbuds: About 6 hours
Charging case: About 66 hours
Charging Time  Earbuds: Around 3 hours
Charging case: About 3.5 hours
App Support     No
Controls/Features         Play and pause a song, play the next and previous song, answer, end, and reject a call, turn the volume up and down, voice assistant
Accessories       Charging case, USB cable, user manual
PriceAround 50 USD

PocBuds X1 Accessories

The earbuds come with the following accessories:

  • Charging case.
  • USB cable.
  • User manual.
PocBuds-X1-Manual-1

PocBuds X1 Manual | Guide & Troubleshooting

How To Control These Earbuds?

NOTE: The multifunction touch button is placed on the top part of the stem of the earbuds.

  • Play or pause a song: Press the multifunction touch button on any of the earbuds one time.
  • Play the next song: While listening to music, press the multifunction touch button on any of the earbuds two times.
  • Play the previous song: While listening to music, press the multifunction touch button on any of the earbuds three times.
  • Turn the volume up: Press and hold the multifunction touch button on the right earbud.
  • Turn the volume down: Press and hold the multifunction touch button on the left earbud.
  • Answer an incoming call: Press the multifunction touch button on any of the earbuds one time.
  • End a current call: Press the multifunction touch button on any of the earbuds one time.
  • Reject an incoming call: Press the multifunction touch button on any of the earbuds two times.
  • Activate the voice assistant: Press the multifunction touch button on any of the earbuds three times.
PocBuds-X1-Manual-2

How To Reset And Re-Pair These Earbuds?

Step 1: Delete the X1 earbuds from the devices’ Bluetooth list.

Step 2: Turn off Bluetooth on the device.

Step 3: With the earbuds out of the charging case, press the multifunction touch button on both earbuds 5 times. A red and blue light will flash alternately three times in one of the earbuds.

This will reset the earbuds.

Step 4: Place the earbuds into the case.

Step 5: Turn on Bluetooth on the desired device.

Step 6: Search for a new device.

Step 7: Select the X1 earbuds. If a password is needed, type “0000” or “1234”.

After that, the “Connected” voice prompt will sound, a light will flash for 5 seconds in one of the earbuds, and the pairing will be done.

PocBuds-X1-Manual-3

What Do The Lights Mean?

Earbuds

  • A blue light flashes for 1 second: The earbuds are pairing with each other.
  • A red and blue light flashes in one of the earbuds and a blue light slowly on the other one: The earbuds will now be ready to pair with any device.
  • A light flashes in one of the earbuds for 5 seconds: The earbuds are connected.
  • A red and blue light flashes alternately three times in one of the earbuds while resetting: The earbuds are resetting.

Charging Case

  • A light flashing while charging: The case is charging.
  • The light turns off while charging: The case is fully charged.

How To Charge The Earbuds?

Earbuds

To charge the earbuds, all you have to do is place them into the charging case and close its lid. The earbuds will start charging automatically.

Charging Case

To charge the charging case, all you have to do is connect the case to a USB charger or charging port. It will start charging automatically. Also, it can get charged using a wireless charger.

PocBuds-X1-Manual-4

How To Wear These Earbuds?

Step 1: Take both earbuds out of the charging case.

Step 2: Identify the left and right earbuds.

Step 3: Choose the ear tips that best suit your ears.

Step 4: Insert the headphones into the inner canal of the ears.

Step 5: Rotate for the best possible comfort and best fit, and make sure that the microphone is pointing to the mouth.

How To Turn On And Off?

Turn On

Automatically: Open the lid of the charging case. After that, the “Pairing” voice prompt will sound, a blue light will flash for 1 second, and the earbuds will turn on automatically.

Manually: Press and hold the multifunction ouch button on both earbuds for about 2 seconds. After that, the “Power on” voice prompt will sound, the earbuds will turn on.

Turn Off

Automatically: Place the earbuds into the charging case and close its lid. After that, the earbuds will turn off automatically.

Manually: Press and hold the multifunction ouch button on both earbuds for about 5 seconds. After that, the earbuds will turn off.

How To Pair The Earbuds?

To Android And iOS Devices

Step 1: Open the lid of the charging case. After that, the earbuds will turn on automatically.

Step 2: Take the earbuds out of the charging case. A red and blue light will start flashing in one of the earbuds and a blue light slowly on the other one, and the “Pairing” voice prompt will sound.

This will indicate that the earbuds are now ready to pair with any device.

Step 3: Unlock the desired device.

Step 4: Go to the device’s settings.

Step 5: Turn on Bluetooth on the desired device.

Step 6: Search for a new device.

Step 7: Select the X1 earbuds. If a password is needed, type “0000” or “1234”.

After that, the “Connected” voice prompt will sound, a light will flash for 5 seconds in one of the earbuds, and the pairing will be done.

To Windows (PC)

Step 1: Turn on the Window’s Bluetooth.

Step 2: Go to the settings.

Step 3: Go to “Bluetooth and other devices”.

Step 4: Click on “Add device”.

Step 5: Click on Bluetooth.

Step 6: Open the lid of the charging case. After that, the earbuds will turn on automatically.

Step 7: Take the earbuds out of the charging case. A red and blue light will start flashing in one of the earbuds and a blue light slowly on the other one, and the “Pairing” voice prompt will sound.

This will indicate that the earbuds are now ready to pair with any device.

Step 8: Select the X1 earbuds. If a password is needed, type “0000” or “1234”.

After that, the “Connected” voice prompt will sound, a light will flash for 5 seconds in one of the earbuds, and the pairing will be done.

The Earbuds’ Voice Prompts

  • Power on: The earbuds turn on.
  • Pairing: The earbuds are pairing with each other/ready to pair.
  • Connected: The earbuds are now connected.

Do These Earbuds Have An App?

Sadly, these earbuds don’t come with app support.

Some Common Problems & Troubleshooting

Left/Right/One side of the earbuds has stopped working

If this happens, it may be because it is low on battery or it did not connect correctly with the device. To fix this, you can do the following:

1. Try charging the earbud that is not working or both, placing them in the charging case.

2. Try factory resetting the earbuds.

3. Check if the earbuds are operating within a normal working range.

If that doesn’t work, the earbud is probably faulty, and I can go for a refund or replacement of it.

Left/Right/One side of the earbuds has a low volume

If this happens, it may be because the earbuds are dirty or the volume is set low. To fix this, you can do the following:

1. Try cleaning the earbud using a cotton swab or carefully clean the mesh with a pin.

2. Try factory resetting the earbuds.

The microphone is not working

If this happens, it can be because the microphone is muted, or the earbuds are badly positioned. To fix this, you can do the following:

If the microphone is muted, check the device microphone volume. If that doesn’t work, that means that there might be a defect in the earbuds, so try replacing them or getting a refund.

The earbuds are not connecting to Windows/laptop/PC

If the earbuds are not connecting, it can be because the Bluetooth on the computer has a pairing problem. To fix this, you can do the following:

1. Try disabling Bluetooth from nearby devices >>> then activate the pairing mode of the earbuds, pair and connect earbuds from Settings >>> Bluetooth & other devices >>> Add a new device >>>> Select Bluetooth.

2. Try uninstalling and reinstalling the Bluetooth driver, or updating the Bluetooth driver. All can be done in Manage >>> Device Manager, reset earbuds (if available), and then repeat the step.

3. Try resetting the earbuds.

PocBuds-X1-Manual-7

FAQs

Are the PocBuds X1 waterproof?

Yes, these earbuds are waterproof (IPX6 and up). They have a rating of IPX7, meaning that they not only are against water but are also protected against the effects of immersion.

Do the PocBuds X1 have a microphone?

Yes, the earbuds come with integrated microphones.

Do the PocBuds X1 have a low latency/gaming mode?

No, these earbuds don’t have a low latency/gaming mode.

Can the PocBuds X1 connect to PCs and laptops?

Yes, these earbuds can connect to PCs and laptops.

Are the PocBuds X1 noise-canceling?

No, these earbuds don’t come with noise-cancellation technology.

We hope you now know how to operate the earbuds from the above PocBuds X1 manual. Want to know anything about the earphones? Do not hesitate to ask in the comment section below.