Home Audiophile Earbuds Manuals The QCY T18 comes with an aptX Adaptive high-fidelity sound (24-bit/96kHz) and aptX Voice super wideband voice (32kHz), a Qualcomm 3050 chipset, Bluetooth 5.2, a 10mm dynamic driver, cVc 8.0, a 30-hour battery life, a personalized app, and much more. Learn how to use them with this new QCY T18 Manual. What's Inside ToggleQCY T18 Manual | Everything You Need To Know!QCY T18 Manual | How to Pair / Connect?QCY T18 Manual | How to Wear?QCY T18 Manual | How to Turn On and Off?How to Control? / How to Operate? – InstructionsQCY T18 Manual | How to Activate Gaming Mode?QCY T18 Manual | How to Activate Mono Mode?QCY T18 Manual | How to ChargeQCY T18 Manual | LED Light StatusQCY T18 Manual | How to Reset?A Guide To QCY T18 APPSome Common Earbuds Problems & TroubleshootingFAQs QCY T18 Manual | Everything You Need To Know! QCY T18 Manual | How to Pair / Connect? To iOS and Android phones Step 1: Open the lid of the charging case. After that, the earbuds will turn on automatically. Step 2: Go to the device’s Bluetooth settings. Step 3: Select “QCY-T18”. If a password is needed, type “0000”. Step 4: After that, the pairing will be done. To PC (Windows) Step 1: Turn on Window’s Bluetooth. Step 2: Go to the settings. Step 3: Go to “Bluetooth and other devices”. Step 4: Click on “Add device”. Step 5: Click on Bluetooth. Step 6: Open the lid of the charging case. After that, the earbuds will turn on automatically. Step 7: Select “QCY-T18”. If a password is needed, type “0000”. Step 8: After that, the pairing will be done. Credits: Qucox QCY T18 Manual | How to Wear? Step 1: Take both earbuds out of the charging case. Step 2: Identify the left and right earbuds. Step 3: Choose the ear tips that best suit your ears. Step 4: Insert the headphones into the inner canal of the ears. Step 5: Rotate for the best possible comfort and best fit, and make sure that the microphone is pointing to the mouth. QCY T18 Manual | How to Turn On and Off? Turn on: Open the lid of the charging case. After that, the earbuds will turn on automatically. Also, they can be turned on by pressing and holding the multifunction touch panel on both earbuds for 1.5 seconds. Turn off: Place the earbuds into the charging case and close its lid. After that, the earbuds will turn off automatically. Credits: Qucox How to Control? / How to Operate? – Instructions Play or pause music: Press the multifunction touch button on any of the earbuds two times.Play the next song: Press and hold the multifunction touch button on the right earbud.Play the previous song: Press and hold the multifunction touch button on the left earbud.Answer an incoming call: Press the multifunction touch button on any of the earbuds two times.End a call: Press the multifunction touch button on any of the earbuds two times.Reject an incoming call: Press and hold the multifunction touch button on any of the earbuds for 1.5 seconds.Activate the voice assistant: Press the multifunction touch button on the left earbud three times. QCY T18 Manual | How to Activate Gaming Mode? To activate or deactivate the gaming mode in the QCY T18, all you have to do is to press the multifunction touch button on the right earbud three times. Credits: Qucox QCY T18 Manual | How to Activate Mono Mode? To activate or deactivate the mono mode in the QCY T18, all you have to do is to pair the earbuds to the device and take out one of the earbuds from the charging case. It will start working by itself. QCY T18 Manual | How to Charge Earbuds To charge the earbuds, all you have to do is to place them into the charging case and close the lid. The earbuds will start charging automatically. Charging case To charge the charging case, all you have to do is to connect the case to a USB charger or charging port with the included USB-A to C cable. It will start charging automatically. Credits: Qucox QCY T18 Manual | LED Light Status Earbuds White lights flashing for about 2 seconds when resetting: Earbuds resetting. Charging case Blue light on: Case has less than 20% of battery.Red light on: Case has more than 20% of battery.Red light on while charging: Case charging.Blue light on while charging: Case fully charged. QCY T18 Manual | How to Reset? Step 1: Forget the earbuds in the paired device. Step 2: Open the lid of the charging case. After that, the earbuds will turn on automatically. Step 3: Press the multifunction touch button on the charging case for around 10 seconds. White lights will start flashing on the earbuds. Step 4: After that, the reset process will be done. Credits: inf.news A Guide To QCY T18 APP The QCY T18 can be used with an application, called QCY. This application is available for iOS and Android devices. After you have logged into the application and connected to the earbuds, you will be able to see the percentage of the battery of the earbuds and the charging case.You will be able to see the different controls placed at the factory, in addition to being able to change them according to the tastes or needs of the user.Also, and thanks to the use of the equalizer, it will be possible to change the sound style, in addition to being able to configure it depending on what is being searched for. Some Common Earbuds Problems & Troubleshooting Left / Right / One side of the earbuds have stopped working If this happens, it may be because it is low on battery or it did not connect correctly with the device. To fix this, you can do the following: 1. Try charging the earbud that is not working or both, placing them in the charging case. 2. Try factory resetting the earbuds. 3. Check if the earbuds are operating within a normal working range. If that doesn’t work, the earbud is probably faulty, and I can go for a refund or replacement of it. Left / Right / One side of the earbuds has low volume If this happens, it may be because the earbuds are dirty or the volume is set low. To fix this, you can do the following: 1. Try cleaning the earbud using a cotton swab or carefully clean the mesh with a pin. 2. Try factory resetting the earbuds. Microphone not working If this happens, it can be because the microphone is muted, or the earbuds are badly positioned. To fix this, you can do the following: If the microphone is muted, check the device microphone volume. If that doesn’t work, that means that there might be a defect in the earbud, so try replacing them or get a refund. QCY T18 earbuds not connecting to Windows/laptop/PC If the earbuds are earbuds not connecting, it can be because the Bluetooth on the computer has a pairing problem. To fix this, you can do the following: 1. Try disabling Bluetooth from nearby devices >>> then activate pairing mode of the earbuds, pair and connect earbuds from Settings >>> Bluetooth & other devices >>> Add a new device >>>> elect Bluetooth, 2. Try uninstalling and reinstalling the Bluetooth driver, or update the Bluetooth driver. All can be done in Manage >>> Device Manager, reset earbuds (if available), and then repeat the step. 3. Try resetting the earbuds. Credits: 亿智蘑菇 FAQs Are QCY T18 waterproof? The QCY T18 have the IPX5 certification, which means they’re dustproof and protected against water projected from a nozzle. Does QCY T18 have a microphone? Yes, the QCY T18 have integrated microphones. Do QCY T18 have low latency/gaming mode? Yes, the QCY T18 have a low latency/gaming mode. How to know when QCY T18 are fully charged? The earbuds take about 1.5 hours to charge, so after that time, they should be fully charged. Can QCY T18 connect to PC and Laptop? Yes, the QCY T18 can connect to PCs, laptops, and tablets. We hope you now know how to operate the earphone from the above QCY T18 Manual. Want to know anything about the earphones? Do not hesitate to ask in the comments section. In case you want or need to contact the QCY company, all your information can be found on its Contact Us page, where you can find numbers and emails available for several countries! Also, they have a Support page, with FAQs and information about their products!
