QCY T8 Manual | Instructions & Troubleshooting 2021

The QCY T8 have DSP noise reduction technology, around 4 hours listening on a full charge, the IPX4 dust and sweat-proof certification, up to 16 hours of music playback with the charging case, a 13mm dynamic driver, Bluetooth 5.0, HFP, A2DP, AVRCP, SBC, AAC, and much more. Learn how to use them with this new QCY T8 Manual.

QCY T8 Manual | Everything You Need To Know!

QCY T8 Manual | How to Pair / Connect?

To iOS and Android phones

Step 1: Open the lid of the charging case. The earbuds will turn on, connect to each other automatically, and be ready to pair to any device.

Step 2: Go to the device’s Bluetooth settings.

Step 3: Select “QCY T8”. If a password is needed, type “0000”.

Step 4: After that, the pairing will be done.

To PC (Windows)

Step 1: Turn on Window’s Bluetooth.

Step 2: Go to the settings.

Step 3: Go to “Bluetooth and other devices”.

Step 4: Click on “Add device”.

Step 5: Click on Bluetooth.

Step 6: Open the lid of the charging case. The earbuds will turn on, connect to each other automatically, and be ready to pair to any device.

Step 7: Select “QCY T8”. If a password is needed, type “0000”.

Step 8: After that, the pairing will be done.

QCY T8 Manual | How to Wear?

Step 1: Take both earbuds out of the charging case.

Step 2: Identify the left and right earbuds.

Step 3: Choose the ear tips that best suit your ears.

Step 4: Insert the headphones into the inner canal of the ears.

Step 5: Rotate for the best possible comfort and best fit, and make sure that the microphone is pointing to the mouth.

QCY T8 Manual | How to Turn On and Off?

Turn on

Automatically: Open the lid of the charging case. After that, a blue light will start flashing and the earbuds will turn on automatically.

Manually: Press and hold the multifunction button on both earbuds for 2 seconds. After that, a blue light will start flashing and the earbuds will turn on.

Turn off

Automatically: Place the earbuds inside of the charging case and close its lid. After that, a red light will turn on for 2 seconds the earbuds will turn off automatically.

Manually: Press and hold the multifunction button on both earbuds for 5 seconds. After that, a red light will turn on for 2 seconds the earbuds will turn off.

How to Control? / How to Operate? – Instructions

• Play or pause music: Press the multifunction touch button on any of the earbuds two times.
• Play the next song: Press and hold the multifunction touch button on any of the earbuds for 2 seconds
• Answer an incoming call: Press the multifunction touch button on any of the earbuds two times.
• End a call: Press the multifunction touch button on any of the earbuds two times.
• Reject an incoming call: Press and hold the multifunction touch button on any of the earbuds for 1 second.
• Activate the voice assistant: Press the multifunction touch button on any of the earbuds three times.

QCY T8 Manual | How to Activate Mono Mode?

Step 1: Take both earbuds out of the charging case.

Step 2: Press and hold the multifunction button on both earbuds for 2 seconds.

Step 3: After 5 seconds, go to the device’s Bluetooth settings.

Step 4: Select “QCY T8”. If a password is needed, type “0000”.

Step 5: After that, the pairing will be done.

QCY T8 Manual | How to Charge

Earbuds

To charge the earbuds, all you have to do is to place them into the charging case and close the lid. The earbuds will start charging automatically.

Charging case

To charge the charging case, all you have to do is to connect the case to a USB charger or charging port with the included USB-A to C cable. It will start charging automatically.

QCY T8 Manual | How to Reset?

Method 1

Step 1: Delete all the connectivity records of the QCY T8 on the device.

Step 2: Turn the earbuds off by pressing and holding the multifunction button on both earbuds for 5 seconds. After that, a red light will turn on for 2 seconds the earbuds will turn off.

Step 3: Take both earbuds out of the charging case.

Step 4: Press and hold the multifunction touch button in both earbuds for about 5 seconds, until a red and blue light flashes three times in both earbuds.

Step 5: After that, the resetting will be done.

Method 2

Step 1: Open the lid of the charging case.

Step 2: Press and hold the multifunction button on the case for about 10 seconds until the light on the case blinks red and blue alternately three times.

Step 3: Close the lid of the charging case.

Step 4: After that, the resetting will be done.

QCY T8 Manual | LED Light Status

Earbuds

• Red light flashing: Earbuds connected to each other.
• Blue light flashing: Earbuds turn on.
• Red light on for 2 seconds: Earbuds turn off.
• Red light on when charging: Earbuds charging.
• Red light off when charging: Earbuds fully charged.
• Red and blue light flashing three times in both earbuds: Earbuds resetting.

Charging case

• Red light on: Case charging.
• Green light on: Case fully charged.

A Guide To QCY T8 APP

The QCY T8 can be used with an application, called QCY. This application is available for iOS and Android devices.

• After you have logged into the application and connected to the earbuds, you will be able to see the percentage of the battery of the earbuds and the charging case.
• You will be able to see the different controls placed at the factory, in addition to being able to change them according to the tastes or needs of the user.
• Also, and thanks to the use of the equalizer, it will be possible to change the sound style, in addition to being able to configure it depending on what is being searched for.

• 

• 

• 

See also

SoundPEATS Engine 4 Manual | Step-by-step, In-depth Guide

Gines·April 21, 2024

Some Common Earbuds Problems & Troubleshooting

Left / Right / One side of the earbuds have stopped working

If this happens, it may be because it is low on battery or it did not connect correctly with the device. To fix this, you can do the following:

1. Try charging the earbud that is not working or both, placing them in the charging case.

2. Try factory resetting the earbuds.

3. Check if the earbuds are operating within a normal working range.

If that doesn’t work, the earbud is probably faulty, and I can go for a refund or replacement of it.

Left / Right / One side of the earbuds has low volume

If this happens, it may be because the earbuds are dirty or the volume is set low. To fix this, you can do the following:

1. Try cleaning the earbud using a cotton swab or carefully clean the mesh with a pin.

2. Try factory resetting the earbuds.

Microphone not working

If this happens, it can be because the microphone is muted, or the earbuds are badly positioned. To fix this, you can do the following:

If the microphone is muted, check the device microphone volume. If that doesn’t work, that means that there might be a defect in the earbud, so try replacing them or get a refund.

QCY T8 earbuds not connecting to Windows/laptop/PC

If the earbuds are earbuds not connecting, it can be because the Bluetooth on the computer has a pairing problem. To fix this, you can do the following:

1. Try disabling Bluetooth from nearby devices >>> then activate pairing mode of the earbuds, pair and connect earbuds from Settings >>> Bluetooth & other devices >>> Add a new device >>>> elect Bluetooth,

2. Try uninstalling and reinstalling the Bluetooth driver, or update the Bluetooth driver. All can be done in Manage >>> Device Manager, reset earbuds (if available), and then repeat the step.

3. Try resetting the earbuds.

FAQs

We hope you now know how to operate the earphone from the above QCY T8 Manual. Want to know anything about the earphones? Do not hesitate to ask in the comments section.

In case you want or need to contact the QCY company, all your information can be found on its Contact Us page, where you can find numbers and emails available for several countries! Also, they have a Support page, with FAQs and information about their products!