raycon-e50-manual-d

Raycon E50 Earbuds Manual | Step-by-Step User Guide 2021

Raycon has become one of the best-known brands with wireless headphones worldwide, and it is no wonder, as they have a large number of very good quality products. Among them is the Raycon E50, which has gained a lot of popularity. Because of this, today we are going to teach you how to use them correctly in this new Raycon E50 Earbuds Manual.

Raycon E50 Earbuds Manual | All You Need To Know!

Raycon E50 Earbuds Manual – How to pair or connect?

  • Step 1: Open the upper cover of the charging case and the earbuds will automatically enter the Bluetooth pairing mode, and the buds’ indicator lights will flash white and blue alternately.
  • Step 2: Turn on the Bluetooth function in the Bluetooth device.
  • Step 3: Refresh the Bluetooth device listing.
  • Step 4: Select the paired audio device named “Raycon E50” to connect. After this, the indicator lights on the earbuds will go off after a successful pairing.

Raycon E50 Earbuds Manual – How to charge?

Charging the earbuds

To charge the earbuds, all you have to do is put the buds in place in the charging case, and they will start charging automatically.

Charging the charging case

To charge the charging case, all you have to do is to plug one end of the USB cable into a 5V power supply, and the other end into the charging port on the charging case. After doing this, the indicator lights will flash during the charging process and then turn off.

Raycon E50 Earbuds Manual – How Long to Charge?

About charging times, the Raycon E50 takes between 1.5 to 2 hours to be fully charged. The charging case, on the other hand, takes 2 hours to fully charge.

Raycon E50 Earbuds Manual – LED light status

  • Charging the earbuds and charging case: The LED lights on both earbuds turn red and stay on.
  • Earbuds and charging case fully charged: The LED lights on both earbuds turn off.

Raycon E50 Manual | All You Need To Know!

Raycon E50 Earbuds Manual – Controls Instruction

  • Play / pause music: Single press the multifunction button on any of the earbuds.
  • Receive incoming call / end call: Single-press the multifunction button on any of the earbuds.
  • Play the next song: Double-click the multifunction button on the right earbud.
  • Play the previous song: Double-click the multifunction button on the left earbud.
  • Volume +: Triple-click the multifunction button on the right earbud.
  • Volume -: Triple-click the multifunction button on the left earbud.
  • Activate voice assistant: Press and hold the multifunction button on any of the earbuds for 2 seconds.
  • Reject incoming calls: Press and hold the multifunction button on any of the earbuds for 2 seconds.
  • Power on: Press and hold the multifunction button on any of the earbuds for 2 seconds.
  • Power off: Press and hold the multifunction button on any of the earbuds for 4 seconds.

Raycon E50 Earbuds Manual – How to connect to PC?

  • Step 1: Disconnect the currently connected Bluetooth device, and then the earbuds will automatically enter the Bluetooth pairing mode.
  • Step 2: Put the left and right earbuds back into the charging case and keep the case open.
  • Step 3: Pair the earbuds as explained in “Connect the earbuds to a Bluetooth device”.

Raycon E50 Earbuds Manual – How to Reset?

  • Step 1: Place both headphones in the charging case.
  • Step 2: Press and hold the power buttons of both earbuds for around 8 seconds until the lights start flashing.
  • Step 3: Headphones are now reset, so remove them from the charging case re-pair them to any device you want.
Raycon E50 Manual - How to Reset?

Q&A

Are the Raycon E50 earbuds waterproof?

No, they aren’t. While you shouldn’t go swimming with them, they are water-resistant with IPX4 grade protection against weather and sweat.

Does the Raycon E50 have a microphone?

Yes, the Raycon E50 have a built-in microphone.

Troubleshooting

Raycon E50 case not charging

In case the charging case does not charge, check the connection between the charging cable and the case. Make sure the cable is in a working connection and the power source is functioning.

Raycon E50 earbuds connection issues won’t pair together

In case the Raycon E50 does not pair together, the most recommended is to factory reset the earbuds.

Raycon E50 left or right earbud not working

In case only one side of the earbuds is working, you can do the following:

  • Check the audio properties and make sure that the single-mode is turned off.
  • Make sure that voice levels are balanced on both earbuds.
  • Factory reset the buds.

Raycon E50 not charging

If the Raycon E50 is not charging, you have to sure that the charging case is closed when charging your earbuds because they will not charge if the case is open. Also, make sure that the metal connection between the earbuds and the charging case is clean and unimpeded.

Troubleshooting Raycon e50 earbuds manual

Raycon E50 Earbuds Manual – Warnings

  1. Never dismantle or refit the product to avoid malfunction or fire hazards.
  2. Keep away from corrosive liquids to avoid damages to the product.
  3. Keep away from extreme ambient temperatures below -10C° or above 60°C.
  4. Keep away from children and pets.
  5. Never touch the earbuds with sharp objects, otherwise, it will easily cause scratches.
  6. Don’t use the product in thunderstorm weather to avoid malfunction or electric shock.
  7. If it has not been used for more than a month, please charge and maintain it in time to ensure that it is safe.

We hope you now know how to operate the earphone from the above Raycon E50 Manual. Want to know anything about the earphones? Do not hesitate to ask in the comments section.

Show Comments (2)
  1. Can it get my buds to pair to each other and can not get them paired to Bluetooth – no matter how much I follow the instructions. I end up with either the right only or left only connected. Please help. I have a Samsung 21s Ultra.

    1. For most Raycon earbuds this is what the company itself has to say ‘A factory reset can solve a lot of problems. While the earbuds are off, hold the power on/off button on the left and right earphones for 30 seconds to restore the earphones to factory settings. This is usually a quick fix for common connectivity issues.

      Turn off earbuds
      Delete all Raycon Bluetooth names in the settings of all paired devices
      Hold down the earbud buttons on both earphones for 30 seconds and place them into the case.
      Take earbuds out of the case and wait for earbuds to pair to each other
      Locate and click on Raycon E50 or Raycon E100 in your phone’s settings to connect
      **If you are still having trouble please try to run the steps again, it may take a few tries to get it right

      One of the users was also able to find another solution as well which worked for most Raycon earbuds as well. Here’s the link to the tutorial: https://www.youtube.com/watch?v=YyDqabvvHaU&ab_channel=LocoCarr

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.