Realme Buds Air 2 Manual | Instructions & Troubleshooting 2021

The Realme Buds Air 2 features Bluetooth 5.2, an incredible battery life of up to 25 hours, 10mm large DLC drivers, IPX5 water resistance certification, and much more. Today we are going to show you how to use them in this new Realme Buds Air 2 Manual.

Realme Buds Air 2 Manual | Everything You Need To Know!

Realme Buds Air 2 Manual | How to Pair / Connect?

To iOS and Android phones

Step 1: Open the charging case with the earbuds inside.

Step 2: Press the multifunction button on the charging case for 3 seconds to enter pairing mode.

Step 3: Turn on the Bluetooth on the desired device.

Step 4: Go to the Bluetooth settings.

Step 5: Select the “realme Buds Air 2”. If a password is needed, type “0000”.

Step 6: After that, the pairing will be done.

To PC (Windows)

Step 1: Turn on Window’s Bluetooth.

Step 2: Go to the settings.

Step 3: Go to “Bluetooth and other devices”.

Step 4: Click on “Add device”.

Step 5: Click on Bluetooth.

Step 6: Open the charging case with the earbuds inside.

Step 7: Press the multifunction button on the charging case for 3 seconds to enter pairing mode.

Step 8: Select the “realme Buds Air 2”. If a password is needed, type “0000”.

Step 9: After that, the pairing will be done.

Realme Buds Air 2 Manual | How To Turn On And Off?

Turn on: Open the charging case. The earbuds will automatically turn on and pair to each other.

Turn off: Close the charging case. The earbuds will automatically turn off.

Realme Buds Air 2 Manual | How To Wear?

Step 1: Choose the ear tips that fit your ears the best.

Step 2: Identify the left and right earbuds.

Step 3: Insert the earbuds into the canal of the ears. The ear hook should also be inserted into the upper canal of the ears.

Step 4: Turn them around and make sure to find the most comfortable position.

Realme Buds Air 2 Manual | How to Charge?

Earbuds

To charge the earbuds, all you have to do is to place them into the charging case and close the lid. The earbuds will start charging automatically.

Charging Case

To charge the charging case, all you have to do is plug a 5V USB Type-C cable into the port on the charging case. It will start charging automatically.

How to Control? / How to Operate? – Instructions

• Play and pause music: Touch the touch panel on any of the earbuds twice.
• Play the next song: Touch the touch panel on any of the earbuds three times.
• Answer an incoming call: Touch the touch panel on any of the earbuds twice.
• End a call: Touch the touch panel on any of the earbuds twice.
• Reject an incoming call: Press and hold the touch panel on any of the earbuds for 2 seconds.
• Switch between noise controlling modes: Press and hold the touch panel on both earbuds for 2 seconds.

Realme Buds Air 2 Manual | Hot to Activate Gaming Mode?

To activate gaming mode in the Realme Buds Air 2, all you have to do is to activate it through the Realme Link app.

Realme Buds Air 2 Manual | LED Light Status

Charging case

• Red light on: Low battery.
• Green light on: Full battery.

Realme Buds Air 2 Manual | How to Reset?

Step 1: Place the earbuds into the charging case and keep the lid open.

Step 2: Press and hold the multifunction button on the charging case for 10 seconds to clear all paired information.

Step 3: After that, the resetting will be done.

A Guide To Realme Buds Air 2 APP

The Realme Buds Air 2 can be used with an application, called Realme Link. This application is available for iOS and Android devices. Through this app, you will be able to have knowledge of the specifications of the earbuds, as well as other products launched by Realme.

Some Common Earbuds Problems & Troubleshooting

Left / Right / One side of the earbuds have stopped working

If this happens, it may be because it is low on battery or it did not connect correctly with the device. To fix this, you can do the following:

1. Try charging the earbud that is not working or both, placing them in the charging case.

2. Try factory reset the earbuds.

3. Check if the earbuds are operating within a normal working range

If that doesn’t work, the earbud is probably faulty, and I can go for a refund or replacement of it.

Left / Right / One side of the earbuds has low volume

If this happens, it may be because the earbuds are dirty or the volume is set low. To fix this, you can do the following:

1. Try cleaning the earbud using a cotton swab or carefully clean the mesh with a pin.

2. Try factory reset the earbuds.

Microphone not working

If this happens, it can be because the microphone is muted, or the earbuds are badly positioned. To fix this, you can do the following:

If the microphone is muted, check the device microphone volume. If that doesn’t work, that means that there might be a defect in the earbud, so try replacing them or get a refund.

Realme Buds Air 2 earbuds not connecting to Windows/laptop/PC

If the earbuds are earbuds not connecting, it can be because the Bluetooth on the computer has a pairing problem. To fix this, you can do the following:

1. Try disabling Bluetooth from nearby devices >>> then activate pairing mode of the earbuds, pair and connect earbuds from Settings >>> Bluetooth & other devices >>> Add a new device >>>> elect Bluetooth,

2. Try uninstalling and reinstalling the Bluetooth driver, or update the Bluetooth driver. All can be done in Manage >>> Device Manager, reset earbuds (if available), and then repeat the step.

3. Try resetting the earbuds as said in the pairing section above.

FAQs

We hope you now know how to operate the earphone from the above Realme Buds Air 2 Manual. Want to know anything about the earphones? Do not hesitate to ask in the comments section.

In case you want or need to contact the Realme company, all your information can be found on its Support page, where you can find numbers and emails available for several countries!