Realme Buds Air 3 Neo Manual | Step-by-step Guide

The Realme Buds Air 3 Neo have a 10mm driver, ENC technology for HD calls, a battery life of 7 hours + 30 using the charging case, Bluetooth 5.2, dust and sweat-proof IPX5 certification, and more. Learn how to use these earbuds with this new Realme Buds Air 3 Neo Manual!

If you are interested in purchasing these earbuds, you can easily do it using the Amazon official website. In case you want to give the original manual a look, you can do it here.

Realme Buds Air 3 Neo Specs Sheet

Model	Realme Buds Air 3 Neo
Weight	Earbuds: 4 grams each Charging case: 40 grams
Waterproof/IP ratings	IPX5
Bluetooth version	V5.2
Range/Distance	10 meters
Driver	10mm
Audio Decoding	SBC, AAC
Connectivity Port/Charging Cable	Type-C
Speaker frequency response	20Hz – 20kHz
Battery Life	Earbuds: About 7 hours Charging case: About 30 hours
Charging Time	Earbuds: About 1 hour Charging time: About 2 hours
App Support	Yes, realme Link
Controls/Features	Play or pause music, turn the volume up and down, play the next song, answer, end, and reject a call
Accessories	Charging case, quick start guide, USB cable, ear tips, warranty card and safety guide
Price	About 40 USD

Realme Buds Air 3 Neo Accessories

The earbuds come with the following accessories:

• Charging case.
• Quick start guide.
• USB cable.
• Ear tips.
• Warranty card and safety guide.

Realme Buds Air 3 Neo Manual | This Is Everything You Need To Know!

How To Pair The Earbuds?       

To iOS and Android phones

Step 1: Open the lid of the charging case. After that, the earbuds will turn on automatically. Also, they will enter pairing mode.

NOTE: If the earbuds don’t enter pairing mode automatically, then you will have to press and hold the multifunction touch button on both earbuds for about 5 seconds.

Step 2: Turn on Bluetooth on the desired device.

Step 3: Go to the device’s Bluetooth settings.

Step 4: Select “realme Buds Air 3 Neo”. If a password is needed, type “0000”.

After that, the pairing will be done.

To PC (Windows)

Step 1: Turn on Bluetooth on the desired device.

Step 2: Go to the settings.

Step 3: Go to “Bluetooth and other devices”.

Step 4: Click on “Add device”.

Step 5: Open the lid of the charging case. After that, the earbuds will turn on automatically. Also, they will enter pairing mode.

NOTE: If the earbuds don’t enter pairing mode automatically, then you will have to press and hold the multifunction touch button on both earbuds for about 5 seconds.

Step 6: Select “realme Buds Air 3 Neo”. If a password is needed, type “0000”.

Step 7: After that, the pairing will be done.

How To Wear These Earbuds?

Step 1: Take both earbuds out of the charging case.

Step 2: Identify the left and right earbuds.

Step 3: Choose the ear tips that best suit your ears.

Step 4: Insert the headphones into the inner canal of the ears.

Step 5: Rotate for the best possible comfort and best fit, and make sure that the microphone is pointing to the mouth.

How To Turn On And Off?

Turn on: Open the lid of the charging case. After that, the earbuds will turn on automatically.

Turn off: Place the earbuds into the charging case and close its lid. After that, the earbuds will turn off automatically.

How to Control? / How to Operate? – Instructions

NOTE: The multifunction touch button is placed on the outside part of the body of the earbuds.

• Play or pause music: Press the multifunction touch button on any of the earbuds two times.
• Turn the volume up: Press and hold the multifunction touch button on the right earbud for about 3 seconds.
• Turn the volume down: Press and hold the multifunction touch button on the left earbud for about 3 seconds.
• Play the next song: Press the multifunction touch button on any of the earbuds three times.
• Answer an incoming call: Press the multifunction touch button on any of the earbuds two times.
• End a current call: Press the multifunction touch button on any of the earbuds two times.
• Reject an incoming call: Press and hold the multifunction touch button on any of the earbuds for about 2 seconds.

How To Activate The Mono Mode?

To activate or deactivate the mono mode in these earbuds, all you have to do is to pair the earbuds to the device and take out one of the earbuds from the charging case. It will start working by itself.

How To Charge The Earbuds?      

Earbuds

To charge the earbuds, all you have to do is to place them into the charging case and close the lid. The earbuds will start charging automatically.

Charging case

To charge the charging case, all you have to do is to connect the case to a USB charger or charging port with the included USB-A to C cable. It will start charging automatically.

What Do The Lights Mean?     

Charging case

• A green light on for 10 seconds with the lid open: The case has more than 20% of battery.
• A red light on for 10 seconds with the lid open: The case has less than 20% of battery.

How To Reset These Earbuds?

Step 1:  Delete all pairing information regarding the “realme Buds Air 3 Neo” earbuds.

Step 2: Place the earbuds into the charging case and keep the lid open.

Step 3: Press and hold the multifunction touch button on both earbuds for about 10 seconds. After that, the resetting will be done.

A Guide To Realme Buds Air 3 Neo APP

Although the Realme Buds Air 3 Neo can be used via Bluetooth, they also have a special application, and it is the realme Link app, available in the Play Store and the App Store.

• Step one: Download the realme Link app and open it on your phone.
• Step two: Once open, you have to select information such as country, language, and most importantly, a realme ID to log in to the app.
• Step three: Inside the application, you have to press the “+” symbol at the top to add the earbuds.
• Step four: Activate the phone’s Bluetooth.
• Step Five: Open the lid of the charging case. After that, the earbuds will turn on and will be ready to pair.
• Step six: When they appear on the list, select the earbuds and pair them with the device and app.

Once connected to the application, it will teach you information related to the earbuds. Not only will you be able to see the percentage of the battery of the two earbuds and the charging case, but you will also be able to configure the controls, activate special features, and obtain information about the earbuds, as well as general help from the company.

How To Update The Earbuds Firmware?

Step 1: Remove the earbuds from the charging case, but keep the lid open.

Step 2: Open the realme Link app.

Step 3: Select the Realme Buds Air 3 Neo.

Step 4: Slide down until “Device details” appears.

Step 5: Select “Firmware update”. If there’s an update available, a “Begin update” button will appear. After pressing it, the updating will start.

Step 6: Place the earbuds into the charging case, and take them out. After that, the updating will be done.

Some Common Earbuds Problems & Troubleshooting

Left / Right / One side of the earbuds have stopped working

If this happens, it may be because it is low on battery or it did not connect correctly with the device. To fix this, you can do the following:

1. Try charging the earbud that is not working or both, placing them in the charging case.

2. Try factory resetting the earbuds.

If that doesn’t work, the earbud is probably faulty, and I can go for a refund or replacement of it.

Left / Right / One side of the earbuds has low-volume

If this happens, it may be because the earbuds are dirty or the volume is set low. To fix this, you can do the following:

1. Try cleaning the earbud using a cotton swab or carefully clean the mesh with a pin.

2. Try factory resetting the earbuds.

The microphone is not working

If this happens, it can be because the microphone is muted, or the earbuds are badly positioned. To fix this, you can do the following:

If the microphone is muted, check the device microphone volume. If that doesn’t work, that means that there might be a defect in the earbuds, so try replacing them or get a refund.

The earbuds not connecting to Windows/laptop/PC

If the earbuds are earbuds not connecting, it can be because the Bluetooth on the computer has a pairing problem. To fix this, you can do the following:

1. Try disabling Bluetooth from nearby devices >>> then activate the pairing mode of the earbuds, pair and connect earbuds from Settings >>> Bluetooth & other devices >>> Add a new device >>>> select Bluetooth.

2. Try uninstalling and reinstalling the Bluetooth driver, or updating the Bluetooth driver. All can be done in Manage >>> Device Manager, reset earbuds (if available), and then repeat the step.

3. Try resetting the earbuds.

FAQs

We hope you now know how to operate the earbuds from the above Realme Buds Air 3 Neo Manual. Want to know anything about the earphones? Do not hesitate to ask in the comments section.