Redmi Buds 3 Lite Manual | Pairing & Charging Instructions 2022

The Redmi Buds 3 Lite have a 6mm dynamic driver, active noise cancellation for HD calls, Bluetooth 5.2, about 5 hours of battery life + 18 using the charging case, and much more. Learn how to use them with this new Redmi Buds 3 Lite Manual.

Redmi Buds 3 Lite Manual | Everything You Need To Know!

Redmi Buds 3 Lite Manual | How to Pair / Connect?

To iOS and Android phones

Step 1: Open the lid of the charging case and take the earbuds out. After that, the earbuds will turn on automatically.

When a white light starts flashing on both earbuds, they will be ready to pair with any device.

Step 2: Go to the device’s Bluetooth settings.

Step 3: Select “Redmi Buds 3 Lite”. If a password is needed, type “0000”.

Step 4: After that, the pairing will be done.

To PC (Windows)

Step 1: Turn on Window’s Bluetooth.

Step 2: Go to the settings.

Step 3: Go to “Bluetooth and other devices”.

Step 4: Click on “Add device”.

Step 5: Open the lid of the charging case and take the earbuds out. After that, the earbuds will turn on automatically.

When a white light starts flashing on both earbuds, they will be ready to pair with any device.

Step 6: Select “Redmi Buds 3 Lite”. If a password is needed, type “0000”.

Step 7: After that, the pairing will be done.

Redmi Buds 3 Lite Manual | How to Wear?

Step 1: Take both earbuds out of the charging case.

Step 2: Identify the left and right earbuds.

Step 3: Choose the ear tips that best suit your ears.

Step 4: Insert the headphones into the inner canal of the ears.

Step 5: Rotate for the best possible comfort and best fit, and make sure that the microphone is pointing to the mouth.

Redmi Buds 3 Lite Manual | How to Turn On and Off?

Turn on: Open the lid of the charging case and take the earbuds out. After that, the earbuds will turn on automatically.

Turn off: Place the earbuds into the charging case. After that, they will turn off automatically.

How to Control? / How to Operate? – Instructions

• Play or pause music: Press and hold the multifunction touch button on any of the earbuds.
• Play the next song: Press the multifunction touch button on any of the earbuds two times.
• Answer an incoming call: Press the multifunction touch button on any of the earbuds two times.
• End a current call: Press the multifunction touch button on any of the earbuds three times.
• Reject an incoming call: Press the multifunction touch button on any of the earbuds three times.
• Put the current call on hold and answer a second call: Press the multifunction touch button on any of the earbuds two times.
• Switch between two current calls: Press the multifunction touch button on any of the earbuds two times.
• End the current call and answer the call on hold: Press the multifunction touch button on any of the earbuds two times.
• Activate the voice assistant: Press the multifunction touch button on any of the earbuds three times.

Redmi Buds 3 Lite Manual | How to Activate Low Latency Mode?

To activate or deactivate the low latency mode in the Redmi Buds 3 Lite, all you have to do is to press and hold the multifunction touch button on any of the earbuds.

Redmi Buds 3 Lite Manual | How to Activate Mono Mode?

To activate or deactivate the mono mode in the Redmi Buds 3 Lite, all you have to do is to pair the earbuds to the device and take out one of the earbuds from the charging case. It will start working by itself.

Redmi Buds 3 Lite Manual | How to Charge?

Earbuds

To charge the earbuds, all you have to do is to place them into the charging case and close the lid. The earbuds will start charging automatically.

Charging case

To charge the charging case, all you have to do is to connect the case to a USB charger or charging port with the included USB-A to C cable. It will start charging automatically.

Redmi Buds 3 Lite Manual | How to Reset?

Step 1: Delete the Redmi Buds 3 Lite from the connected devices list on the device’s Bluetooth.

Step 2: Open the lid of the charging case.

Step 3: With the earbuds inside the case, press and hold the multifunction touch button on both earbuds for about 5 seconds.

When a white light flashes 3 times on both earbuds, the resetting will be done.

Redmi Buds 3 Lite Manual | LED Light Status

Earbuds

• A white light starts flashing on both earbuds: The earbuds are ready to pair with any device.
• A light turns on when placed on the charging case: The earbuds are charging.
• That light turns off: The earbuds are fully charged.
• A white light flashes 3 times on both earbuds: The earbuds are resetting.

Charging case

• A white light on with the earbuds inside: The earbuds are charging.
• That light turns off: The earbuds are fully charged.
• A white light on while charging: The case is charging.
• That light turns off: The case is fully charged.

Some Common Earbuds Problems & Troubleshooting

Left / Right / One side of the earbuds have stopped working

If this happens, it may be because it is low on battery or it did not connect correctly with the device. To fix this, you can do the following:

1. Try charging the earbud that is not working or both, placing them in the charging case.

2. Try factory resetting the earbuds.

3. Check if the earbuds are operating within a normal working range

If that doesn’t work, the earbud is probably faulty, and I can go for a refund or replacement of it.

Left / Right / One side of the earbuds has a low volume

If this happens, it may be because the earbuds are dirty or the volume is set low. To fix this, you can do the following:

1. Try cleaning the earbud using a cotton swab or carefully clean the mesh with a pin.

2. Try factory resetting the earbuds.

Microphone not working

If this happens, it can be because the microphone is muted, or the earbuds are badly positioned. To fix this, you can do the following:

If the microphone is muted, check the device microphone volume. If that doesn’t work, that means that there might be a defect in the earbud, so try replacing them or get a refund.

Redmi Buds 3 Lite earbuds not connecting to Windows/laptop/PC

If the earbuds are earbuds not connecting, it can be because the Bluetooth on the computer has a pairing problem. To fix this, you can do the following:

1. Try disabling Bluetooth from nearby devices >>> then activate pairing mode of the earbuds, pair and connect earbuds from Settings >>> Bluetooth & other devices >>> Add a new device >>>> elect Bluetooth,

2. Try uninstalling and reinstalling the Bluetooth driver, or update the Bluetooth driver. All can be done in Manage >>> Device Manager, reset earbuds (if available), and then repeat the step.

3. Try resetting the earbuds.

FAQs

We hope you now know how to operate the earphone from the above Redmi Buds 3 Lite Manual. Want to know anything about the earphones? Do not hesitate to ask in the comments section.