Redmi Buds 4 Manual | Pairing & Charging Instructions 2022

The Redmi Buds 4 have Bluetooth 5.2, the IPX4 certification, the Active Noise Cancellation feature, a battery life of about 6 hours, Dual-mic AI call noise reduction technology, and more. Learn how to use them with this new Redmi Buds 4 Manual.

Redmi Buds 4 Manual | This Is All You Need To Know!

Redmi Buds 4 Manual | How to Pair / Connect?

To iOS and Android phones

Step 1: Open the charging case. After that, the earbuds will turn on automatically.

When a light on the charging case starts flashing, the earbuds will be ready to pair with any device.

Step 2: Turn on the Bluetooth on the desired device.

Step 3: Go to the device’s Bluetooth settings.

Step 4: Select “Redmi Buds 4”. If a password is needed, type “0000”.

Step 5: After that, the light on the case will stay still and turn off, and the pairing will be done.

To PC (Windows)

Step 1: Turn on Window’s Bluetooth.

Step 2: Go to the settings.

Step 3: Go to “Bluetooth and other devices”.

Step 4: Click on “Add device”.

Step 5: Click on Bluetooth.

Step 6: Open the charging case. After that, the earbuds will turn on automatically.

When a light on the charging case starts flashing, the earbuds will be ready to pair with any device.

Step 7: Select “Redmi Buds 4”. If a password is needed, type “0000”.

Step 8: After that, the light on the case will stay still and turn off, and the pairing will be done.

Redmi Buds 4 Manual | How to Wear?

Step 1: Take both earbuds out of the charging case.

Step 2: Identify the left and right earbuds.

Step 3: Choose the ear tips that best suit your ears.

Step 4: Insert the headphones into the inner canal of the ears.

Step 5: Rotate for the best possible comfort and best fit, and make sure that the microphone is pointing to the mouth.

Redmi Buds 4 Manual | How to Turn On And Off?

Turn on: Open the charging case. After that, the earbuds will turn on automatically.

Turn off: Place the earbuds into the charging case and close its lid. After that, the earbuds will turn off automatically.

How to Control? / How to Operate? – Instructions

• Play or pause music: Press the multifunction touch button on any of the earbuds two times.
• Play the next song: Press the multifunction touch button on any of the earbuds three times.
• Answer an incoming call: Press the multifunction touch button on any of the earbuds two times.
• End a current call: Press the multifunction touch button on any of the earbuds three times.
• Reject an incoming call: Press the multifunction touch button on any of the earbuds three times.

Redmi Buds 4 Manual | How to Activate ANC Mode?

To activate or deactivate the ANC mode in the Redmi Buds 4, all you have to do is to press and hold the multifunction touch button on any of the earbuds.

Redmi Buds 4 Manual | How to Activate Mono Mode?

To activate or deactivate the mono mode in the Redmi Buds 4, all you have to do is to pair the earbuds to the device and take out one of the earbuds from the charging case. It will start working by itself.

Redmi Buds 4 Manual | How to Charge

Earbuds

To charge the earbuds, all you have to do is to place them into the charging case and close the lid. The earbuds will start charging automatically.

Charging case

To charge the charging case, all you have to do is to connect the case to a USB charger or charging port with the included USB-A to C cable. Also, it can also be charged using a wireless charger.

Redmi Buds 4 Manual | LED Light Status

Charging case

• One light flashing with the earbuds inside and the lid open: The earbuds will be ready to pair with any device.
• Said light stays still and turns off: The earbuds are connected.
• One light on with the earbuds inside and the lid closed: The earbuds are charging.
• Said light turns off: The earbuds are fully charged.
• A light flashing while resetting: The earbuds are resetting.
• A light stays on while resetting: The earbuds are resetting.

Redmi Buds 4 Manual | How to Reset?

Step 1: Delete all “Redmi Buds 4” pairing records on the connected device.

Step 2: Place the earbuds into the charging case and close its lid.

Step 3: Press and hold the reset button on the back of the case for about 10 seconds, and a white light will start flashing. After that, the light will stay on, and the resetting will be done.

A Guide To Redmi Buds 4 APP

The Redmi Buds 4 can be used with a specialized app for phones, and it’s called Mi Buds M8. You can find it available for Android phones.

• First page: After downloading and opening the application, a special menu will appear where some of the earbuds launched by Redmi can be found. Being here, the Redmi Buds 4 must be selected, so that they connect to the app.
• Main page: After having selected the Redmi Buds 4 and that they have been connected to the application, you can have certain advantages. Not only can you see the battery percentage of the earbuds and the charging case, but you can also configure the Transparency and Noise Cancellation modes.

Also, on this main page, you will have the usual configurations and the possibility of being aware of updates for the earbuds, as well as the control configurations, and different options to be able to use the earbuds in a better way.

Some Common Earbuds Problems & Troubleshooting

Left / Right / One side of the earbuds have stopped working

If this happens, it may be because it is low on battery or it did not connect correctly with the device. To fix this, you can do the following:

1. Try charging the earbud that is not working or both, placing them in the charging case.

2. Try factory resetting the earbuds.

3. Check if the earbuds are operating within a normal working range.

If that doesn’t work, the earbud is probably faulty, and I can go for a refund or replacement of it.

Left / Right / One side of the earbuds has low volume

If this happens, it may be because the earbuds are dirty or the volume is set low. To fix this, you can do the following:

1. Try cleaning the earbud using a cotton swab or carefully clean the mesh with a pin.

2. Try factory resetting the earbuds.

Microphone not working

If this happens, it can be because the microphone is muted, or the earbuds are badly positioned. To fix this, you can do the following:

If the microphone is muted, check the device microphone volume. If that doesn’t work, that means that there might be a defect in the earbud, so try replacing them or get a refund.

The earbuds are not connecting to Windows/laptop/PC

If the earbuds are earbuds not connecting, it can be because the Bluetooth on the computer has a pairing problem. To fix this, you can do the following:

1. Try disabling Bluetooth from nearby devices >>> then activate pairing mode of the earbuds, pair and connect earbuds from Settings >>> Bluetooth & other devices >>> Add a new device >>>> elect Bluetooth,

2. Try uninstalling and reinstalling the Bluetooth driver, or update the Bluetooth driver. All can be done in Manage >>> Device Manager, reset earbuds (if available), and then repeat the step.

3. Try resetting the earbuds.

FAQs

We hope you now know how to operate the earphone from the above Redmi Buds 4 Manual. Want to know anything about the earphones? Do not hesitate to ask in the comments section.