Sabbat-E12-Ultra-Manual-2

Sabbat E12 Ultra Manual | Step-by-step Pairing & Troubleshooting

The Sabbat E12 Ultra comes with an IPX5 certification, Bluetooth 5.0, a Qualcomm chip, a battery life of 6 to 8 hours, a 10mm driver size, and much more. Learn how to use them with this new Sabbat E12 Ultra Manual.

Sabbat E12 Ultra Manual | Everything You Need To Know!

Sabbat E12 Ultra Manual | How to Pair / Connect?

To iOS and Android phones

Step 1: Take both earbuds out of the charging case. They will automatically turn on, pair to each other, and be ready to pair to any device. On this step, a red and white light will flash.

Step 2: Go to the Bluetooth settings.

Step 3: Select “Sabbat E12 Ultra”. If a password is needed, type “0000”.

Step 4: After that, the pairing will be done.

To PC (Windows)

Step 1: Turn on Window’s Bluetooth.

Step 2: Go to the settings.

Step 3: Go to “Bluetooth and other devices”.

Step 4: Click on “Add device”.

Step 5: Click on Bluetooth.

Step 6: Take both earbuds out of the charging case. They will automatically turn on, pair to each other, and be ready to pair to any device. On this step, a red and white light will flash.

Step 7: Select “Sabbat E12 Ultra”. If a password is needed, type “0000”.

Step 8: After that, the pairing will be done.

Sabbat-E12-Ultra-Manual-1
Credits: Scarbir

Sabbat E12 Ultra Manual | How to Wear?

Step 1: Choose the ear tips that fit your ears the best.

Step 2: Identify the left and right earbuds.

Step 3: Rotate the earbuds and pop them into the ear, then shake your head to check the wearing stability.

Step 4: Adjust the mic towards the mouth to gain a better calling experience.

Sabbat E12 Ultra Manual | How to Turn On And Off?

Automatically

Turn on: Take the earbuds out of the charging case. They will automatically turn on.

Turn off: Place the earbuds into the charging case. They will automatically turn off.

Manually

To turn the earbuds on or off, all you have to do is to press and hold the touch button on the left earbud for 3 seconds.

Sabbat E12 Ultra Manual | How to Activate Mono Mode?

To activate the mono mode on the Sabbat E12 Ultra, all you have to do is to pair the earbuds to any device, and then place one of them into the charging case. The other one will start working by itself.

Sabbat-E12-Ultra-Manual-2
Credits: Soundphile Review

How to Control? / How to Operate? – Instructions

  • Play and pause music: Press the touch button on any of the earbuds twice.
  • Play the next song: Press the touch button on the right earbud two times.
  • Play the previous song: Press the touch button on the left earbud two times.
  • Turn the volume up: Press the touch button on the right earbud three times.
  • Turn the volume down: Press the touch button on the left earbud three times.
  • Answer an incoming call: Press the touch button on any of the earbuds twice.
  • End a call: Press the touch button on any of the earbuds twice.
  • Reject an incoming call: Press and hold the touch button on any of the earbuds for 2 seconds.
  • Activate the Voice Assistant: Press and hold the touch button on any of the earbuds for 2 seconds.
Sabbat-E12-Ultra-Manual-3
Credits: Prime Audio Reviews

Sabbat E12 Ultra Manual | How to Charge

Earbuds

To charge the earbuds, all you have to do is to place them into the charging case and close the lid. The earbuds will start charging automatically.

Charging case

To charge the charging case, all you have to do is plug a 5V USB Type-C cable into the port on the charging case. It will start charging automatically.

Sabbat E12 Ultra Manual | LED Light Status

Earbuds

  • Red and white light flashing in one earbud and no light on the other one: Earbuds paired to each other and ready to pair to any device.
  • Red and white light flashing: Earbuds resetting.

Sabbat E12 Ultra Manual | How to Reset?

Step 1: Place both earbuds into the charging case. A red light will turn on.

Step 2: Remove the “Sabbat E12 Ultra” from the list of connected devices.

Step 3: Turn off the device’s Bluetooth.

Step 4: Press and hold the touch button on both earbuds for a couple of seconds until a red and white light flashes.

Step 5: Take both earbuds out of the charging case. After this, a red and white light will start flashing.

Step 6: After that, the resetting will be done, and connect it with any device.

Sabbat-E12-Ultra-Manual-4
Credits: Prime Audio Reviews

Some Common Earbuds Problems & Troubleshooting

Left / Right / One side of the earbuds have stopped working

If this happens, it may be because it is low on battery or it did not connect correctly with the device. To fix this, you can do the following:

1. Try charging the earbud that is not working or both, placing them in the charging case.

3. Check if the earbuds are operating within a normal working range

If that doesn’t work, the earbud is probably faulty, and I can go for a refund or replacement of it.

Left / Right / One side of the earbuds has low volume

If this happens, it may be because the earbuds are dirty or the volume is set low. To fix this, you can do the following:

1. Try cleaning the earbud using a cotton swab or carefully clean the mesh with a pin.

2. Try factory reset the earbuds.

Microphone not working

If this happens, it can be because the microphone is muted, or the earbuds are badly positioned. To fix this, you can do the following:

If the microphone is muted, check the device microphone volume. If that doesn’t work, that means that there might be a defect in the earbud, so try replacing them or get a refund.

Sabbat E12 Ultra earbuds not connecting to Windows/laptop/PC

If the earbuds are earbuds not connecting, it can be because the Bluetooth on the computer has a pairing problem. To fix this, you can do the following:

1. Try disabling Bluetooth from nearby devices >>> then activate pairing mode of the earbuds, pair and connect earbuds from Settings >>> Bluetooth & other devices >>> Add a new device >>>> elect Bluetooth,

2. Try uninstalling and reinstalling the Bluetooth driver, or update the Bluetooth driver. All can be done in Manage >>> Device Manager, reset earbuds (if available), and then repeat the step.

3. Try resetting the earbuds.

Sabbat-E12-Ultra-Manual-5
Credits: Scarbir

FAQs

Are Sabbat E12 Ultra waterproof?

The Sabbat E12 Ultra have the IPX5 certification, which means they’re dustproof and protected against water projected from a nozzle.

Does Sabbat E12 Ultra have a microphone?

Yes, the Sabbat E12 Ultra have integrated microphones.

Do Sabbat E12 Ultra have low latency/gaming mode?

No, the Sabbat E12 Ultra don’t have low latency/gaming mode.

How to know when Sabbat E12 Ultra are fully charged?

The Sabbat E12 Ultra takes about 2 hours to charge so, after that time, they will be fully charged.

Can Sabbat E12 Ultra connect to PC and Laptop?

Yes, the Sabbat E12 Ultra can connect to PCs, laptops and tablets.

We hope you now know how to operate the earphone from the above Sabbat E12 Ultra Manual. Want to know anything about the earphones? Do not hesitate to ask in the comments section.

In case you want or need to contact the Sabbat company, all your information can be found on its Contact Us page, where you can find numbers and emails available for several countries!