Home Audiophile Earbuds Manuals The Sabbat Vooplay comes with Bluetooth 5.0, a Qualcomm chip, a battery life of 6 hours, a 14.2mm driver size, CVC 8.0 noise cancellation technology, and much more. Learn how to use them with this new Sabbat Vooplay Manual. What's Inside ToggleSabbat Vooplay Manual | Everything You Need To Know!Sabbat Vooplay Manual | How to Pair / Connect?Sabbat Vooplay Manual | How to Wear?Sabbat Vooplay Manual | How to Turn On And Off?Sabbat Vooplay Manual| How to Activate Mono Mode?How to Control? / How to Operate? – InstructionsSabbat Vooplay Manual | How to ChargeSabbat Vooplay Manual | LED Light StatusSabbat Vooplay Manual | How to Reset?Some Common Earbuds Problems & TroubleshootingFAQs Sabbat Vooplay Manual | Everything You Need To Know! Sabbat Vooplay Manual | How to Pair / Connect? To iOS and Android phones Step 1: Place both earbuds into the charging case, so they will be in charging status. Step 2: Take both earbuds out of the charging case. They will automatically turn on, pair to each other, and be ready to pair to any device. On this step, a red and white light will flash in one earbud. Step 3: Go to the Bluetooth settings. Step 4: Select “SABBAT VOOPLAY”. If a password is needed, type “0000”. Step 5: After that, the pairing will be done. To PC (Windows) Step 1: Turn on Window’s Bluetooth. Step 2: Go to the settings. Step 3: Go to “Bluetooth and other devices”. Step 4: Click on “Add device”. Step 5: Click on Bluetooth. Step 6: Place both earbuds into the charging case, so they will be in charging status. Step 7: Take both earbuds out of the charging case. They will automatically turn on, pair to each other, and be ready to pair to any device. On this step, a red and white light will flash in one earbud. Step 8: Select “SABBAT VOOPLAY”. If a password is needed, type “0000”. Step 9: After that, the pairing will be done. Sabbat Vooplay Manual | How to Wear? Step 1: Choose the ear tips that fit your ears the best. Step 2: Identify the left and right earbuds. Step 3: Rotate the earbuds and pop them into the ear, then shake your head to check the wearing stability. Step 4: Adjust the mic towards the mouth to gain a better calling experience. Sabbat Vooplay Manual | How to Turn On And Off? Automatically Turn on: Take the earbuds out of the charging case. They will automatically turn on. Turn off: Place the earbuds into the charging case. They will automatically turn off. Manually Turn on: Short press the touch button on any of the earbuds. Turn off: Press and hold the touch button on any of the earbuds for 4 seconds. Sabbat Vooplay Manual| How to Activate Mono Mode? To activate the mono mode on the Sabbat Vooplay, all you have to do is to pair the earbuds to any device, and then place one of them into the charging case. The other one will start working by itself. Credits: Gadget Pilipinas How to Control? / How to Operate? – Instructions Play and pause music: Short press the touch button on any of the earbuds.Play the next song: Press the touch button on the right earbud two times.Play the previous song: Press the touch button on the left earbud two times.Turn the volume up: Press the touch button on the right earbud three times.Turn the volume down: Press the touch button on the left earbud three times.Answer an incoming call: Short press the touch button on any of the earbuds.End a call: Short press the touch button on any of the earbuds.Reject an incoming call: Press and hold the touch button on any of the earbuds for 2 seconds.Activate the Voice Assistant: Press and hold the touch button on any of the earbuds for 2 seconds. Sabbat Vooplay Manual | How to Charge Earbuds To charge the earbuds, all you have to do is to place them into the charging case and close the lid. The earbuds will start charging automatically. Charging case To charge the charging case, all you have to do is plug a 5V USB Type-C cable into the port on the charging case. It will start charging automatically. Sabbat Vooplay Manual | LED Light Status Earbuds Red light on: Earbuds charging.Red light off: Earbuds fully charged. Case White light flashing: Case charging.Four white lights on: Case fully charged. Sabbat Vooplay Manual | How to Reset? Step 1: Place both earbuds into the charging case. Step 2: Press and hold the touch button on both earbuds for about 6 to 8 seconds until a red light flashes 4 times. Step 3: Take both earbuds out of the charging case. After this, a white light will start flashing. Step 4: After that, the resetting will be done, and connect it with any device. Some Common Earbuds Problems & Troubleshooting Left / Right / One side of the earbuds have stopped working If this happens, it may be because it is low on battery or it did not connect correctly with the device. To fix this, you can do the following: 1. Try charging the earbud that is not working or both, placing them in the charging case. 3. Check if the earbuds are operating within a normal working rangeSee alsoBaseus Bowie MA10 Manual | Pairing & Charging GuideGines·April 14, 2024 If that doesn’t work, the earbud is probably faulty, and I can go for a refund or replacement of it. Left / Right / One side of the earbuds has low volume If this happens, it may be because the earbuds are dirty or the volume is set low. To fix this, you can do the following: 1. Try cleaning the earbud using a cotton swab or carefully clean the mesh with a pin. 2. Try factory reset the earbuds. Microphone not working If this happens, it can be because the microphone is muted, or the earbuds are badly positioned. To fix this, you can do the following: If the microphone is muted, check the device microphone volume. If that doesn’t work, that means that there might be a defect in the earbud, so try replacing them or get a refund. Sabbat Vooplay earbuds not connecting to Windows/laptop/PC If the earbuds are earbuds not connecting, it can be because the Bluetooth on the computer has a pairing problem. To fix this, you can do the following: 1. Try disabling Bluetooth from nearby devices >>> then activate pairing mode of the earbuds, pair and connect earbuds from Settings >>> Bluetooth & other devices >>> Add a new device >>>> elect Bluetooth, 2. Try uninstalling and reinstalling the Bluetooth driver, or update the Bluetooth driver. All can be done in Manage >>> Device Manager, reset earbuds (if available), and then repeat the step. 3. Try resetting the earbuds. Credits: Gadget Pilipinas FAQs Are Sabbat Vooplay waterproof? The Sabbat Vooplay are waterproof, however, there is no knowledge of their IP certification. Does Sabbat Vooplay have a microphone? Yes, the Sabbat Vooplay have integrated microphones. Do Sabbat Vooplay have low latency/gaming mode? No, the Sabbat Vooplay don’t have low latency/gaming mode. How to know when Sabbat Vooplay are fully charged? When the Sabbat Vooplay are charging, a red light turns on. After they are fully charged, the light turns off. Can Sabbat Vooplay connect to PC and Laptop? Yes, the Sabbat Vooplay can connect to PCs, laptops and tablets. We hope you now know how to operate the earphone from the above Sabbat Vooplay Manual. Want to know anything about the earphones? Do not hesitate to ask in the comments section. In case you want or need to contact the Sabbat company, all your information can be found on its Contact Us page, where you can find numbers and emails available for several countries!