Sabbat-X12-Pro-Manual-6

Sabbat X12 Pro Manual | Pairing & Charging Instructions 2021

The Sabbat X12 Pro comes with Bluetooth 5.0 with A2DP, AVRCP, HFP, and HSP profiles, the IPX5 certification, battery life of 6 to 8 hours, an 10mm dynamic driver, and much more. Learn how to use them with this new Sabbat X12 Pro Manual.

Sabbat X12 Pro Manual | Everything You Need To Know!

Sabbat X12 Pro Manual | How to Pair / Connect?

To iOS and Android phones

Step 1: Take the earbuds out of the charging case. They will automatically turn on and pair to each other, and a red light will flash twice.

Step 2: When a red and blue light starts flashing alternately in one earbud, they are going to be ready to pair.

Step 3: Go to the Bluetooth settings.

Step 4: Select “Sabbat X12 Pro”. If a password is needed, type “0000”.

Step 5: After that, the pairing will be done.

To PC (Windows)

Step 1: Turn on Window’s Bluetooth.

Step 2: Go to the settings.

Step 3: Go to “Bluetooth and other devices”.

Step 4: Click on “Add device”.

Step 5: Click on Bluetooth.

Step 6: Take the earbuds out of the charging case. They will automatically turn on and pair to each other, and a red light will flash twice.

Step 7: When a red and blue light starts flashing alternately in one earbud, they are going to be ready to pair.

Step 8: Select “Sabbat X12 Pro”. If a password is needed, type “0000”.

Step 9: After that, the pairing will be done.

Sabbat-X12-Pro-Manual-1
Credits: Scarbir

Sabbat X12 Pro Manual | How to Turn On and Off?

Turn on

Automatically: Take the earbuds out of the charging case. A red light will turn on for 1 second and they will turn on automatically.

Manually: Press and hold the multifunction button on both earbuds for 4 seconds to turn them on. A red light will turn on and the earbuds will turn on.

Turn off

Automatically: Place the earbuds into the charging case A red light will flash and they will turn on automatically.

Manually: Press and hold the multifunction button on both earbuds for 4 seconds to turn them off. A red light will turn on and the earbuds will turn off.

Sabbat-X12-Pro-Manual-2

Sabbat X12 Pro Manual | How to Activate Mono Mode?

To activate the mono mode in the Sabbat X12 Pro, all you have to do is to pick up one of the earbuds from the charging case, and it will work by itself.

How to Control? / How to Operate? – Instructions

  • Play and pause music: Press the multifunction button on any of the earbuds once.
  • Play the next song: Press the multifunction button on the right earbud two times.
  • Play the previous song: Press the multifunction button on the left earbud two times.
  • Turn the volume up: Press the multifunction button on the right earbud three times.
  • Turn the volume down: Press the multifunction button on the left earbud three times.
  • Answer an incoming call: Press the multifunction button on any of the earbuds once.
  • End a call: Press the multifunction button on any of the earbuds once.
  • Reject an incoming call: Press and hold the multifunction button on any of the earbuds for 2 seconds.
  • Activate the Voice Assistant: Press and hold the multifunction button on any of the earbuds for 2 seconds.
Sabbat-X12-Pro-Manual-3

Sabbat X12 Pro Manual | How to Charge

Earbuds

To charge the earbuds, all you have to do is to place them into the charging case and close the lid. The earbuds will start charging automatically.

Charging case

To charge the charging case, all you have to do is plug a 5V USB Type-C cable into the port on the charging case. It will start charging automatically.

Sabbat-X12-Pro-Manual-4

Sabbat X12 Pro Manual | LED Light Status

Earbuds

  • Red light on while in the charging case: Earbuds charging.
  • Blue light on and turns off after 5 seconds: Earbuds fully charged.
  • Red light flashing twice: Earbuds paired to each other.
  • Red and blue light flashing alternately in one earbud: Earbuds ready to pair.
  • Blue light on: Earbuds paired to device.
  • Light that turns red, blue and purple: Earbuds resetting.
  • Red light turns on and then off: Earbuds turn on.
  • Red light turns on and then off: Earbuds turn off.

Charging case

  • Red light on and turns off after 10 seconds: Case fully charged.
  • Red light on and turns off after 10 seconds with earbuds inside: Earbuds fully charged.
  • Red light on with earbuds inside: Earbuds charging.

Sabbat X12 Pro Manual | How to Reset?

Step 1: Disconnect the earbuds from the connected device.

Step 2: Take the earbuds from the charging case.

Step 3: Press and hold the multifunction button on both earbuds for 4 seconds until a red light flashes twice, and the earbuds turn off.

Step 4: Press and hold the multifunction button on both earbuds until you see the lights turn on red, blue, and purple. Wait 20 seconds.

Step 5: Place both earbuds into the charging case. After that, a red light should turn on.

Step 6: After that, the resetting will be done

Sabbat-X12-Pro-Manual-5

Some Common Earbuds Problems & Troubleshooting

Left / Right / One side of the earbuds have stopped working

If this happens, it may be because it is low on battery or it did not connect correctly with the device. To fix this, you can do the following:

1. Try charging the earbud that is not working or both, placing them in the charging case.

2. Try factory resetting the earbuds.

3. Check if the earbuds are operating within a normal working range

If that doesn’t work, the earbud is probably faulty, and I can go for a refund or replacement of it.

Left / Right / One side of the earbuds has low volume

If this happens, it may be because the earbuds are dirty or the volume is set low. To fix this, you can do the following:

1. Try cleaning the earbud using a cotton swab or carefully clean the mesh with a pin.

2. Try factory resetting the earbuds.

Microphone not working

If this happens, it can be because the microphone is muted, or the earbuds are badly positioned. To fix this, you can do the following:

If the microphone is muted, check the device microphone volume. If that doesn’t work, that means that there might be a defect in the earbud, so try replacing them or get a refund.

Sabbat X12 Pro earbuds not connecting to Windows/laptop/PC

If the earbuds are earbuds not connecting, it can be because the Bluetooth on the computer has a pairing problem. To fix this, you can do the following:

1. Try disabling Bluetooth from nearby devices >>> then activate pairing mode of the earbuds, pair and connect earbuds from Settings >>> Bluetooth & other devices >>> Add a new device >>>> elect Bluetooth,

2. Try uninstalling and reinstalling the Bluetooth driver, or update the Bluetooth driver. All can be done in Manage >>> Device Manager, reset earbuds (if available), and then repeat the step.

3. Try resetting the earbuds.

Sabbat-X12-Pro-Manual-6

FAQs

Are Sabbat X12 Pro waterproof?

The Sabbat X12 Pro have the IPX5 certification, which means they’re dustproof and protected against water projected from a nozzle.

Does Sabbat X12 Pro have a microphone?

Yes, the Sabbat X12 Pro have an integrated microphone.

Do Sabbat X12 Pro have low latency/gaming mode?

No, the Sabbat X12 Pro don’t have low latency/gaming mode.

How to know when Sabbat X12 Pro are fully charged?

When the earbuds are charging, a red light will be on in the charging case. When fully charged, that light turns off, and a blue light on in the earbuds and turns off after 5 seconds.

Can Sabbat X12 Pro connect to PC and Laptop?

Yes, the Sabbat X12 Pro can connect to PCs, laptops and tablets.

We hope you now know how to operate the earphone from the above Sabbat X12 Pro Manual. Want to know anything about the earphones? Do not hesitate to ask in the comments section.

In case you want or need to contact the Sabbat company, all your information can be found on its Contact Us page, where you can find numbers and emails available for several countries! Also, they have a Support page, with FAQs and information about their products!