Sennheiser-Momentum-True-Wireless-2-Manual-10

Sennheiser Momentum True Wireless 2 Manual | Instructions

Aliexpress banner

The Sennheiser Momentum True Wireless 2 have a 7mm dynamic driver, a battery life of about 7 hours + 28 amazing hours using the charging case, Bluetooth 5.1, a connection working range of 10 meters, the IPX4 certification, and more. Learn how to use them with this new Sennheiser Momentum True Wireless 2 Manual.

Sennheiser Momentum True Wireless 2 Manual | Pairing Manual!

Sennheiser Momentum True Wireless 2 Manual | How to Pair / Connect?

To iOS and Android phones

Step 1: Open the lid of the charging case and take the earbuds out. After that, a “Power on” voice prompt will sound, and the earbuds will turn on automatically. A red and green light will start flashing, the earbuds will connect to each other, and a “Connected” voice prompt will sound.

Step 2: Press and hold the multifunction touch button on both earbuds for about 3 seconds. When a red and blue light starts flashing on the earbuds, that means that they will be ready to pair with any device. A “Pairing” voice prompt will sound.

Step 3: Turn on Bluetooth on the desired device.

Step 4: Go to the device’s Bluetooth settings.

Step 5: Select “MOMENTUM TW 2”. If a password is needed, type “0000”.

Step 6: After that, a blue light will flash three times, and the pairing will be done. A “Pairing successful” voice prompt will sound.

To PC (Windows)

Step 1: Turn on Bluetooth on the desired device.

Step 2: Go to the settings.

Step 3: Go to “Bluetooth and other devices”.

Step 4: Click on “Add device”.

Step 5: Open the lid of the charging case and take the earbuds out. After that, a “Power on” voice prompt will sound, and the earbuds will turn on automatically. A red and green light will start flashing, the earbuds will connect to each other, and a “Connected” voice prompt will sound.

Step 6: Press and hold the multifunction touch button on both earbuds for about 3 seconds. When a red and blue light starts flashing on the earbuds, that means that they will be ready to pair with any device. A “Pairing” voice prompt will sound.

Step 7: Select “MOMENTUM TW 2”. If a password is needed, type “0000”.

Step 8: After that, a blue light will flash three times, and the pairing will be done. A “Pairing successful” voice prompt will sound.

Sennheiser-Momentum-True-Wireless-2-Manual-1
Credits: assets.sennheiser.com

Sennheiser Momentum True Wireless 2 Manual | How to Wear?

Step 1: Take both earbuds out of the charging case.

Step 2: Identify the left and right earbuds.

Step 3: Choose the ear tips that best suit your ears.

Step 4: Insert the headphones into the inner canal of the ears.

Step 5: Rotate for the best possible comfort and best fit, and make sure that the microphone is pointing to the mouth.

Sennheiser Momentum True Wireless 2 Manual | How to Turn On and Off?

Turn on: Open the lid of the charging case and take the earbuds out. After that, a “Power on” voice prompt will sound, and the earbuds will turn on automatically.

Turn off: Place the earbuds into the charging case. After that, the earbuds will turn off automatically.

How to Control? / How to Operate? – Instructions

  • Play or pause music: Press the multifunction touch button on the left earbud one time.
  • Turn the volume up: Press and hold the multifunction touch button on the right earbud. A “Volume max” voice prompt will sound.
  • Turn the volume down: Press and hold the multifunction touch button on the left earbud. A “Volume min” voice prompt will sound.
  • Play the next song: Press the multifunction touch button on the left earbud two times.
  • Play the previous song: Press the multifunction touch button on the left earbud three times.
  • Answer an incoming call: Press the multifunction touch button on the right earbud one time.
  • Answer an incoming call and end the current one: Press the multifunction touch button on the right earbud one time.
  • End a current call: Press the multifunction touch button on the right earbud one time. A “Call ended” voice prompt will sound.
  • Reject an incoming call: Press the multifunction touch button on the right earbud two times. A “Call rejected” voice prompt will sound.
  • Reject an incoming call and keep the current one: Press the multifunction touch button on the right earbud two times.
  • Activate the voice assistant: Press the multifunction touch button on the right earbud one time.

Sennheiser Momentum True Wireless 2 Manual | How to Activate ANC Mode?

To activate or deactivate the ANC mode in the Sennheiser Momentum True Wireless 2, all you have to do is to press the multifunction touch button on the right earbud three times.

Sennheiser Momentum True Wireless 2 Manual | How to Activate Ambient Sound Mode?

To activate or deactivate the ambient sound mode in the Sennheiser Momentum True Wireless 2, all you have to do is to press the multifunction touch button on the right earbud two times.

Sennheiser-Momentum-True-Wireless-2-Manual-3
Credits: Pocket-lint

Sennheiser Momentum True Wireless 2 Manual | How to Activate Mono Mode?

To activate or deactivate the mono mode in the Sennheiser Momentum True Wireless 2, all you have to do is to pair the earbuds to the device and take out one of the earbuds from the charging case. It will start working by itself.

Sennheiser Momentum True Wireless 2 Manual | How to Charge?

Earbuds

To charge the earbuds, all you have to do is to place them into the charging case and close the lid. The earbuds will start charging automatically.

Charging case

To charge the charging case, all you have to do is to connect the case to a USB charger or charging port with the included USB-A to C cable. It will start charging automatically.

Sennheiser-Momentum-True-Wireless-2-Manual-4
Credits: Pocket-lint

Sennheiser Momentum True Wireless 2 Manual | How to Reset?

Step 1: Delete all “MOMENTUM TW 2” pairing information from the connected device.

Step 2: Connect the charging case to its charger.

Step 3: Place the earbuds into the charging case and keep the lid open.

Step 4: Press and hold the multifunction touch button on both earbuds for about 12 seconds. After that, the resetting will be done.

Sennheiser-Momentum-True-Wireless-2-Manual-5
Credits: assets.sennheiser.com

Sennheiser Momentum True Wireless 2 Manual | LED Light Status

Earbuds

  • A red and blue light starts flashing: They will be ready to pair with any device.
  • A blue light flashes three times: The earbuds are paired.
  • A red light flashes three times: The pairing failed.
  • A red light flashing quickly: The battery of the earbuds is almost empty.
  • A red light flashing slowly: There was a system error.
  • A red and green light flashing: The earbuds are ready to connect to each other.
Sennheiser-Momentum-True-Wireless-2-Manual-6
Credits: assets.sennheiser.com

Charging case

  • A yellow light flashing with the earbuds inside: The earbuds are charging.
  • A green light on with the earbuds inside: The earbuds are fully charged.
  • A red light flashing with the earbuds inside: A charging error/battery error has been detected in at least one of the earbuds.
  • A yellow light flashing while charging: The case is charging.
  • A green light on while charging: The case is fully charged.
  • A red light flashing while charging: A charging error/battery error has been detected in the charging case.
Sennheiser-Momentum-True-Wireless-2-Manual-7
Credits: assets.sennheiser.com

After pressing the button on the back of the charging case without being connected to the charger:

  • A green light on with the earbuds inside: The earbuds are fully charged.
  • A yellow light flashing with the earbuds inside: The earbuds are charging.
  • A yellow light on with the earbuds inside: The earbuds are fully charged, but the battery of the case is not enough.
  • A red light on with the earbuds inside: The battery of both the earbuds and the case is empty.
  • A red light flashing with the earbuds inside: A charging error/battery error has been detected in at least one of the earbuds.
  • A green light on: The case is fully charged.
  • A yellow light on: The case has less than 90% of battery.
Sennheiser-Momentum-True-Wireless-2-Manual-8
Credits: assets.sennheiser.com

Sennheiser Momentum True Wireless 2 Manual | Voice Prompts

  • “Power on”: The earbuds turn on.
  • “Power off”: The earbuds turn off.
  • “Connected”: The earbuds are connected to each other.
  • “No connection”: The earbuds didn’t connect to each other.
  • “Pairing”: The earbuds are in pairing mode.
  • “Pairing successful”: The earbuds paired with the device.
  • “Pairing failed”: The pairing failed.
  • “Recharge headset”: The earbuds need battery.
  • “Call rejected”: An incoming call has been rejected.
  • “Call ended”: A call has ended.
  • “Volume min.”: The volume is set to the minimum.
  • “Volume max.”: The volume is set to the maximum.

A Guide To Sennheiser Momentum True Wireless 2 APP

The Sennheiser Momentum True Wireless 2 can be used with an application, called Smart Control. This application is available for iOS and Android devices. Through it, the user will be able to see information about the earbuds, as well as all the internal characteristics that it has, in addition to being able to change and update them.

  • First page: This is the home page, and it shows the battery percentage of the earbuds and the menu.
  • Second page: This is the equalizer, where you can change and modify the bass, tremble, and others in the earbuds.
  • Third page: Here are the devices to which the earbuds are connected. As you like, they will be able to connect or disconnect from the earbuds with a single click.
  • Fourth page: Earbuds controls. Here you will be able to see the available controls of the earbuds, also, they will be able to be modified depending on the user’s tastes.
  • Fifth page: You will be able to see all the specifications of the earbuds, as well as the possibility of changing certain factory features of these.
  • Sixth page: Here, you will be able to see the firmware version, and you will be able to update it if necessary.
  • Seventh page: Finally, there are the settings of the app, where you can choose a language, see its version and reset it if necessary.

Sennheiser Momentum True Wireless 2 Manual | How to Update the Software?

Step 1: Before updating, make sure that the earbuds are out of the charging case, and don’t place them into it while updating.

Step 2: Connect the earbuds to the Smart Control app.

Step 3: The app provides information related to available firmware updates and guides you through the installation process.

Some Common Earbuds Problems & Troubleshooting

Left / Right / One side of the earbuds have stopped working

If this happens, it may be because it is low on battery or it did not connect correctly with the device. To fix this, you can do the following:

1. Try charging the earbud that is not working or both, placing them in the charging case.

2. Try factory resetting the earbuds.

3. Check if the earbuds are operating within a normal working range

If that doesn’t work, the earbud is probably faulty, and I can go for a refund or replacement of it.

Left / Right / One side of the earbuds has a low volume

If this happens, it may be because the earbuds are dirty or the volume is set low. To fix this, you can do the following:

1. Try cleaning the earbud using a cotton swab or carefully clean the mesh with a pin.

2. Try factory resetting the earbuds.

The microphone is not working

If this happens, it can be because the microphone is muted, or the earbuds are badly positioned. To fix this, you can do the following:

If the microphone is muted, check the device microphone volume. If that doesn’t work, that means that there might be a defect in the earbud, so try replacing them or get a refund.

The earbuds not connecting to Windows/laptop/PC

If the earbuds are earbuds not connecting, it can be because the Bluetooth on the computer has a pairing problem. To fix this, you can do the following:

1. Try disabling Bluetooth from nearby devices >>> then activate pairing mode of the earbuds, pair and connect earbuds from Settings >>> Bluetooth & other devices >>> Add a new device >>>> elect Bluetooth,

2. Try uninstalling and reinstalling the Bluetooth driver, or updating the Bluetooth driver. All can be done in Manage >>> Device Manager, reset earbuds (if available), and then repeat the step.

3. Try resetting the earbuds.

Sennheiser-Momentum-True-Wireless-2-Manual-10
Credits: Pocket-lint

FAQs

Are the Sennheiser Momentum True Wireless 2 waterproof?

No, the Sennheiser Momentum True Wireless 2 are not waterproof (IPX6 and up). They have a rating of IPX4, which means they’re splash and sweat-resistant.

Do the Sennheiser Momentum True Wireless 2 have a microphone?

Yes, the earbuds come with integrated microphones.

Do the Sennheiser Momentum True Wireless 2 have a low latency/gaming mode?

No, these earbuds don’t have a low latency/gaming mode.

How to know when the Sennheiser Momentum True Wireless 2 are fully charged?

When the earbuds are charging, a yellow light is flashing on the charging case. When fully charged, the light turns green.

Can the Sennheiser Momentum True Wireless 2 connect to PC and Laptop?

Yes, these earbuds can connect to PCs, laptops, and even tablets.

Are the Sennheiser Momentum True Wireless 2 noise canceling?

No! These earbuds don’t come with noise cancellation technology.

We hope you now know how to operate the earphone from the above Sennheiser Momentum True Wireless 2 Manual. Want to know anything about the earphones? Do not hesitate to ask in the comments section.