Sol-Republic-Amps-Air-Manual-8

Sol Republic Amps Air Manual | How To Use These Earbuds?

The Sol Republic Amps Air come with specs such as 6mm dynamic drivers, Bluetooth 4.1, up to 4 hours of battery life + 40 hours using the charging case, NFC and mono mode support, the IPX4 dust and sweat-proof certification, and much more. Learn how to use these earbuds using this manual!

Sol Republic Amps Air | Pairing Guide

How to Pair The Earbuds?

To iOS and Android phones

Step 1: Open the lid of the charging case and take the earbuds out. After that, the earbuds will turn on automatically. Also, you can press the multifunction touch button on both earbuds one time.

NOTE: A red light will start flashing, meaning that the earbuds are pairing with each other. If the earbuds don’t enter pairing mode automatically, then press the multifunction touch button on both earbuds two times.

When a white light starts flashing, it means that the earbuds are now ready to pair with any device.

Step 2: Turn on Bluetooth on the desired device.

Step 3: Go to the device’s Bluetooth settings.

Step 4: Select the “Amps Air” earbuds. If a password is needed, type “0000”. After that, a tone will be heard, and the pairing will be done.

To PC (Windows)

Step 1: Turn on Bluetooth on the desired device.

Step 2: Go to the settings.

Step 3: Go to “Bluetooth and other devices”.

Step 4: Click on “Add device”.

Step 5: Open the lid of the charging case and take the earbuds out. After that, the earbuds will turn on automatically. Also, you can press the multifunction touch button on both earbuds one time.

NOTE: A red light will start flashing, meaning that the earbuds are pairing with each other. If the earbuds don’t enter pairing mode automatically, then press the multifunction touch button on both earbuds two times.

When a white light starts flashing, it means that the earbuds are now ready to pair with any device.

Step 6: Select the “Amps Air” earbuds. If a password is needed, type “0000”. After that, a tone will be heard, and the pairing will be done.

Sol-Republic-Amps-Air-Manual-1
Credits: Sol Republic

How to Pair Only One Earbud?

Step 1: Open the lid of the charging case and take the earbud out. After that, it will turn on automatically. Also, you can press the multifunction touch button on said earbud one time.

When a red and white light starts flashing, it means that the earbud is now ready to pair with any device.

Step 2: Turn on Bluetooth on the desired device.

Step 3: Go to the device’s Bluetooth settings.

Step 4: Select the “Amps Air Mono” earbud. If a password is needed, type “0000”. After that, a tone will be heard, and the pairing will be done.

Sol-Republic-Amps-Air-Manual-2
Credits: Sol Republic

Re-pair The Earbuds With Each Other

If there is any issue between the earbuds, then do the following steps:

Step 1: Turn off Bluetooth on the connected device.

Step 2: Take the earbuds out of the charging case.

Step 3: Press and hold the multifunction touch button on both earbuds for about 3 seconds to turn them off.

Step 4: Press the multifunction touch button on both earbuds one time to turn them on.

Step 5: Press the multifunction touch button on both earbuds two times to put them into pairing mode and reconnect to each other.

Step 6: Turn on Bluetooth on the desired device.

Step 7: Go to the device’s Bluetooth settings.

Step 8: Select the “Amps Air” earbuds. If a password is needed, type “0000”. After that, a tone will be heard, and the pairing will be done.

Sol-Republic-Amps-Air-Manual-3
Credits: Sol Republic

How to Wear?

Step 1: Take both earbuds out of the charging case.

Step 2: Identify the left and right earbuds.

Step 3: Choose the ear tips that best suit your ears.

Step 4: Insert the headphones into the inner canal of the ears.

Step 5: Rotate for the best possible comfort and best fit, and make sure that the microphone is pointing to the mouth.

How to Turn On and Off?

Turn on: Open the lid of the charging case and take the earbuds out. After that, the earbuds will turn on automatically. Also, you can press the multifunction touch button on both earbuds one time.

Turn off: Place the earbuds into the charging case. After that, the earbuds will turn off automatically. Also, you can press and hold the multifunction touch button on both earbuds for about 3 seconds.

Sol-Republic-Amps-Air-Manual-4
Credits: Sol Republic

How to Control? / How to Operate? – Instructions

  • Play or pause a song: Press the multifunction touch button on any of the earbuds one time.
  • Answer an incoming call: Press the multifunction touch button on any of the earbuds one time.
  • End a current call: Press the multifunction touch button on any of the earbuds one time.
  • Reject an incoming call: Press and hold the multifunction touch button on any of the earbuds.
  • Answer a second incoming call: Press the multifunction touch button on any of the earbuds one time.
  • Activate the voice assistant: Press the multifunction touch button on any of the earbuds two times.
Sol-Republic-Amps-Air-Manual-5
Credits: Sol Republic

How to Activate The Mono Mode?

To activate or deactivate the mono mode in these earbuds, all you have to do is to pair the earbuds to the device and take out one of the earbuds from the charging case. It will start working by itself.

How to Charge The Earbuds?

Earbuds

To charge the earbuds, all you have to do is to place them into the charging case and close the lid. The earbuds will start charging automatically.

Charging case

To charge the charging case, all you have to do is to connect the case to a USB charger or charging port with the included USB-A to C cable. It will start charging automatically.

Sol-Republic-Amps-Air-Manual-6
Credits: Sol Republic

What Do The Lights Mean?

Earbuds

  • A red light flashing: The earbuds are now ready to pair with each other.
  • A white light flashing: The earbuds are now ready to pair with any device.
  • A red and white light flashing while on mono mode: The earbud is ready to pair with any device.
  • A red light on while on the charging case: The earbuds are charging.
  • Said red light turns white and then off while on the charging case: The earbuds are fully charged.

Charging case

  • A white light flashing with the earbuds inside: The earbuds are charging.
  • A white light on with the earbuds inside: The earbuds are fully charged.
  • A red light on with the earbuds inside: The earbuds have a low battery.
  • One light flashing: The case has between 0% and 25% of battery.
  • One light on and one flashing: The case has between 25% and 50% of battery.
  • Two lights on and one flashing: The case has between 50% and 75% of battery.
  • Three lights on and one flashing: The case has between 75% and 99% of battery.
  • Four lights on: The case is fully charged.
Sol-Republic-Amps-Air-Manual-7
Credits: Sol Republic

Some Common Problems & Troubleshooting

Left / Right / One side of the earbuds has stopped working

If this happens, it may be because it is low on battery or it did not connect correctly with the device. To fix this, you can do the following:

1. Try charging the earbud that is not working or both, placing them in the charging case.

2. Try factory resetting the earbuds.

3. Check if the earbuds are operating within a normal working range

If that doesn’t work, the earbud is probably faulty, and I can go for a refund or replacement of it.

Left / Right / One side of the earbuds has a low volume

If this happens, it may be because the earbuds are dirty or the volume is set low. To fix this, you can do the following:

1. Try cleaning the earbud using a cotton swab or carefully clean the mesh with a pin.

2. Try factory resetting the earbuds.

The microphone is not working

If this happens, it can be because the microphone is muted, or the earbuds are badly positioned. To fix this, you can do the following:

If the microphone is muted, check the device microphone volume. If that doesn’t work, that means that there might be a defect in the earbud, so try replacing them or get a refund.

The earbuds are not connecting to Windows/laptop/PC

If the earbuds are earbuds not connecting, it can be because the Bluetooth on the computer has a pairing problem. To fix this, you can do the following:

1. Try disabling Bluetooth from nearby devices >>> then activate the pairing mode of the earbuds, pair and connect earbuds from Settings >>> Bluetooth & other devices >>> Add a new device >>>> select Bluetooth.

2. Try uninstalling and reinstalling the Bluetooth driver, or updating the Bluetooth driver. All can be done in Manage >>> Device Manager, reset earbuds (if available), and then repeat the step.

3. Try resetting the earbuds.

Sol-Republic-Amps-Air-Manual-8

FAQs

Are the Sol Republic Amps Air waterproof?

No, the Sol Republic Amps Air are not waterproof (IPX6 and up). They have a rating of IPX4, which means they’re splash and sweat-resistant.

Do the Sol Republic Amps Air have a microphone?

Yes, the earbuds come with integrated microphones.

Do the Sol Republic Amps Air have a low latency/gaming mode?

No. These earbuds don’t have a low latency/gaming mode.

Can the Sol Republic Amps Air connect to PCs and laptops?

Yes, these earbuds can connect to PCs, laptops, and even tablets.

Are the Sol Republic Amps Air noise-canceling?

No. These earbuds don’t come with noise-cancellation technology.

How to know when the Sol Republic Amps Air are fully charged?

When the earbuds are charging, a red light is flashing on the earbuds. When fully charged, said light turns white and then off.

We hope you now know how to operate the earphone from the above Sol Republic Amps Air manual. Want to know anything about the earphones? Do not hesitate to ask in the comments section.