Soundcore Liberty Air 2 Manual | Pairing & Charging Instructions 2021

Being the original version of the Soundcore Liberty Air 2 Pro, the Soundcore Liberty Air 2 have two 6mm diamond coated drivers, Bluetooth 5.0, SBC, AAC, and aptX audio codec formats, 7 hours of playtime, and much more. Today you are going to learn how to use these earbuds in the right way with this new Soundcore Liberty Air 2 Manual.

Soundcore Liberty Air 2 Manual | Everything You Need To Know!

Soundcore Liberty Air 2 Manual | How to Pair / Connect?

To iOS and Android phones

Step 1: Take the earbuds out of the charging case. They will turn on and pair to each other automatically and a white LED light will flash quickly on the earbuds.

Step 2: Turn on the Bluetooth on the desired device.

Step 3: Go to the Bluetooth settings.

Step 4: Select the “Soundcore Liberty Air 2”. If a password is needed, type “0000”.

Step 5: After that, the pairing will be done.

To PC (Windows)

Step 1: Turn on Window’s Bluetooth.

Step 2: Go to the settings.

Step 3: Go to “Bluetooth and other devices”.

Step 4: Click on “Add device”.

Step 5: Click on Bluetooth.

Step 6: Take the earbuds out of the charging case. They will turn on and pair to each other automatically and a white LED light will flash quickly on the earbuds.

Step 7: The earbuds by the name “Soundcore Liberty Air 2” will appear on the settings.

Step 8: Select and, after this, the earbuds will automatically connect to the desired device and will be ready to use.

Soundcore Liberty Air 2 Manual | Switch between Mono and Stereo mode

The earbuds go into stereo mode automatically after being paired with each other. To enter mono mode, all you have to do is to place one of the earbuds into the charging case, and the other one will enter mono mode automatically.

Soundcore Liberty Air 2 Manual | How To Wear?

Step 1: Choose the ear tips that fit your ears the best.

Step 2: Identify the left and right earbuds.

Step 3: Adjust the earbuds so that the microphone is towards the mouth.

Soundcore Liberty Air 2 Manual | How To Turn On And Off?

Turn on

Method 1: Take the earbuds out of the charging case. They will turn on automatically.

Method 2: Press the touch panel on both earbuds for 2 seconds until a white LED light blinks.

Turn off

Method 1: Place the earbuds into the charging case. They will turn off automatically.

Method 2: Press the touch panel on both earbuds for 8 seconds until a red LED light blinks.

Soundcore Liberty Air 2 Manual | How To Turn The Volume Up And Down?

While it can’t be done through earbuds, volume can be accommodated through the earbuds-compatible app.

How to Control? / How to Operate? – Instructions

• Play or pause music: Click on the touch panel on the right earbud twice.
• Play the next song: Click on the touch panel on the left earbud twice.
• Answer an incoming call: Click on the touch panel on any of the earbuds twice.
• Hang up a call: Click on the touch panel on any of the earbuds twice.
• Reject an incoming call: Press the touch panel on any of the earbuds for 2 seconds.
• Activate the Voice Assistant: Press the touch panel on any of the earbuds for 2 seconds.

Soundcore Liberty Air 2 Manual | How to Charge?

Earbuds

To charge the earbuds, all you have to do is to place them into the charging case and close the lid. The earbuds will start charging automatically.

Charging Case

To charge the charging case, all you have to do is plug a 5V USB Type-C cable into the port on the charging case. It will start charging automatically.

Soundcore Liberty Air 2 Manual | LED Light Status

Earbuds

• White LED light flashing rapidly: Bluetooth pairing.
• White LED light flashing slowly: Bluetooth connected.
• Steady white LED light for 1 second: Earbuds connected.

Charging case

• One light flashing: 30% or less of battery.
• One light on and one flashing: 30 to 70% of battery.
• Two lights on and one flashing: 70% or more of battery.
• Three lights on: Charging case fully charged.

Soundcore Liberty Air 2 Manual | How to Reset?

Step 1: Place the earbuds into the charging case, and keep the lid open.

Step 2: Long press the touch panel on both earbuds for 10 seconds. After that, a LED light will blink red 3 times.

Step 3: After that, the resetting will be done.

A Guide To Soundcore Liberty Air 2 APP

The Soundcore Liberty Air 2 can be used with an application, called Soundcore. This application is available for iOS and Android devices. 

• First page: The first page of this application is the home page, where you can see the battery percentage of both earbuds, as well as the Ambient Sound, Tip Fit Test and equalizer settings and controls.
• Second page: Not only will you be able to see the controls available on the earbuds, but they can also be activated, deactivated or changed if desired.
• Third page: Here, not only can you see the types of sounds that can be used with the earbuds, but you can choose one depending on the tastes of each user.
• Fourth page: In addition to having information, this application also has the possibility of helping to make sound tests, to make sure that the earbuds work correctly.

• 

Some Common Earbuds Problems & Troubleshooting

Left / Right / One side of the earbuds have stopped working

If this happens, it may be because it is low on battery or it did not connect correctly with the device. To fix this, you can do the following:

1. Try charging the earbud that is not working or both, placing them in the charging case.

2. Try factory reset the earbuds.

3. Check if the earbuds are operating within a normal working range

If that doesn’t work, the earbud is probably faulty, and I can go for a refund or replacement of it.

Left / Right / One side of the earbuds has low volume

If this happens, it may be because the earbuds are dirty or the volume is set low. To fix this, you can do the following:

1. Try cleaning the earbud using a cotton swab or carefully clean the mesh with a pin.

2. Try factory reset the earbuds.

Microphone not working

If this happens, it can be because the microphone is muted, or the earbuds are badly positioned. To fix this, you can do the following:

If the microphone is muted, check the device microphone volume. If that doesn’t work, that means that there might be a defect in the earbud, so try replacing them or get a refund.

Soundcore Liberty Air 2 earbuds not connecting to Windows/laptop/PC

If the earbuds are earbuds not connecting, it can be because the Bluetooth on the computer has a pairing problem. To fix this, you can do the following:

1. Try disabling Bluetooth from nearby devices >>> then activate pairing mode of the earbuds, pair and connect earbuds from Settings >>> Bluetooth & other devices >>> Add a new device >>>> elect Bluetooth,

2. Try uninstalling and reinstalling the Bluetooth driver, or update the Bluetooth driver. All can be done in Manage >>> Device Manager, reset earbuds (if available), and then repeat the step.

3. Try resetting the earbuds as said in the pairing section above.

FAQs

We hope you now know how to operate the earphone from the above Soundcore Liberty Air 2 Manual. Want to know anything about the earphones? Do not hesitate to ask in the comments section. In case you want or need to contact the Soundcore company, all your information can be found on its Support Page, where you can find numbers and emails available for several countries!