Soundcore Liberty Air 2 Pro Manual | Step-by-step Pairing & Troubleshooting

Released by Soundcore, the Soundcore Liberty Air 2 Pro have gained popularity among users thanks to its specifications, as well as Bluetooth 5.0, SBC, AAC, an 11mm driver size, 6-hour battery life, and up to 21 hours with the case, the IPX4 splash-resistant certification and more. Today we are going to show you how to use them in this Soundcore Liberty Air 2 Pro Manual.

Soundcore Liberty Air 2 Pro Manual | Everything You Need To Know!

Soundcore Liberty Air 2 Pro Manual | How to Pair / Connect?

To iOS and Android phones

Step 1: Take the earbuds out of the charging case. They will turn on and pair to each other automatically and a LED light will flash quickly on one earbud and slowly on the other earbud.

Step 2: Turn on the Bluetooth on the desired device.

Step 3: Go to the Bluetooth settings.

Step 4: Select the “Soundcore Liberty Air 2 Pro”. If a password is needed, type “0000”.

Step 5: After that, the pairing will be done.

To PC (Windows)

Step 1: Turn on Window’s Bluetooth.

Step 2: Go to the settings.

Step 3: Go to “Bluetooth and other devices”.

Step 4: Click on “Add device”.

Step 5: Click on Bluetooth.

Step 6: Take the earbuds out of the charging case so they turn on and pair to each other automatically.

Step 7: The earbuds by the name “Soundcore Liberty Air 2 Pro” will appear on the settings.

Step 8: Select and, after this, the earbuds will automatically connect to the desired device and will be ready to use.

Soundcore Liberty Air 2 Pro Manual | Switch between Mono and Stereo mode

The earbuds go into stereo mode automatically after being paired with each other. To enter mono mode, all you have to do is to place one of the earbuds into the charging case, and the other one will enter mono mode automatically.

Soundcore Liberty Air 2 Pro Manual | How To Wear?

Step 1: Choose the ear tips that fit your ears the best.

Step 2: Identify the left and right earbuds.

Step 3: Adjust the earbuds so that the microphone is towards the mouth.

How to Control? / How to Operate? – Instructions

• Play or pause music: Click on the touch panel on the right earbud twice.
• Play the next song: Click on the touch panel on the left earbud twice.
• Answer an incoming call: Click on the touch panel on any of the earbuds twice.
• Answer a second incoming call and put the current call on hold: Click on the touch panel on any of the earbuds twice.
• Hang up a call: Press the touch panel on any of the earbuds for 2 seconds.
• Reject an incoming call: Press the touch panel on any of the earbuds for 2 seconds.
• Switch between a call on hold and an active call: Press the touch panel on any of the earbuds for 2 seconds.
• Change ambient sound modes: Press the touch panel on any of the earbuds for 2 seconds.

Soundcore Liberty Air 2 Pro Manual | How to Charge?

Earbuds

To charge the earbuds, all you have to do is to place them into the charging case and close the lid. The earbuds will start charging automatically.

Charging Case

To charge the charging case, all you have to do is plug a 5V USB Type-C cable into the port on the charging case. It will start charging automatically.

Soundcore Liberty Air 2 Pro Manual | LED Light Status

Charging case

• One light flashing: 10% or less of battery.
• One light on: 10 to 30% of battery.
• Two lights on: 30 to 70% of battery.
• Three lights on: 70% or more of battery.

Soundcore Liberty Air 2 Pro Manual | How to Reset?

Step 1: Place the earbuds into the charging case.

Step 2: Long press the touch panel on both earbuds for 10 seconds. After that, a LED light will blink red 3 times then turn white.

Step 3: Wait until the LED light in one earbud blinks quickly while the one in the other earbud is blinking slowly. After that, the resetting will be done.

A Guide To Soundcore Liberty Air 2 Pro APP

The Soundcore Liberty Air 2 Pro can be used with an application, called Soundcore. This application is available for iOS and Android devices. 

• First page: The first page of this application is the home page, where you can see the battery percentage of both earbuds, as well as the Ambient Sound, Tip Fit Test and equalizer settings and controls.
• Second page: Not only will you be able to see the controls available on the earbuds, but they can also be activated, deactivated or changed if desired.
• Third page: Here, not only can you see the types of sounds that can be used with the earbuds, but you can choose one depending on the tastes of each user.
• Fourth page: In addition to having information, this application also has the possibility of helping to make sound tests, to make sure that the earbuds work correctly.

Some Common Earbuds Problems & Troubleshooting

Problems Left / Right / One side of the earbuds have stopped working

If this happens, it may be because it is low on battery or it did not connect correctly with the device. To fix this, you can do the following:

1. Try charging the earbud that is not working or both, placing them in the charging case.

2. Try factory reset the earbuds.

If that doesn’t work, the earbud is probably faulty, and I can go for a refund or replacement of it.

Left / Right / One side of the earbuds has low volume

If this happens, it may be because the earbuds are dirty or the volume is set low. To fix this, you can do the following:

1. Try cleaning the earbud using a cotton swab or carefully clean the mesh with a pin.

2. Try factory reset the earbuds.

Microphone not working

If this happens, it can be because the microphone is muted, or the earbuds are badly positioned. To fix this, you can do the following:

If the microphone is muted, check the device microphone volume. If that doesn’t work, that means that there might be a defect in the earbud, so try replacing them or get a refund.

Soundcore Liberty Air 2 Pro earbuds not connecting to Windows/laptop/PC

If the earbuds are earbuds not connecting, it can be because the Bluetooth on the computer has a pairing problem. To fix this, you can do the following:

1. Try disabling Bluetooth from nearby devices >>> then activate pairing mode of the earbuds, pair and connect earbuds from Settings >>> Bluetooth & other devices >>> Add a new device >>>> elect Bluetooth,

2. Try uninstalling and reinstalling the Bluetooth driver, or update the Bluetooth driver. All can be done in Manage >>> Device Manager, reset earbuds (if available), and then repeat the step.

3. Try resetting the earbuds as said in the pairing section above.

FAQs

We hope you now know how to operate the earphone from the above Soundcore Liberty Air 2 Pro Manual. Want to know anything about the earphones? Do not hesitate to ask in the comments section.