Soundcore-Liberty-Neo-Manual-7

Soundcore Liberty Neo Manual | Step-by-step Guide 2021

The Soundcore Liberty Neo comes with Bluetooth 5.0 with A2DP, AVRCP, HFP, and HSP profiles, the IPX7 certification, battery life of 4,5 hours, and much more. Learn how to use them with this new Soundcore Liberty Neo Manual.

Soundcore Liberty Neo Manual | Everything You Need To Know!

Soundcore Liberty Neo Manual | How to Pair / Connect?

To iOS and Android phones

Step 1: Take the earbuds out of the charging case. They will automatically turn on and pair to each other, and a white light will flash rapidly.

Step 2: When a white light starts flashing slowly on the earbuds, they are going to be ready to pair.

Step 3: Go to the Bluetooth settings.

Step 4: Select “Soundcore Liberty Neo”. If a password is needed, type “0000”.

Step 5: After that, the pairing will be done.

To PC (Windows)

Step 1: Turn on Window’s Bluetooth.

Step 2: Go to the settings.

Step 3: Go to “Bluetooth and other devices”.

Step 4: Click on “Add device”.

Step 5: Click on Bluetooth.

Step 6: Take the earbuds out of the charging case. They will automatically turn on and pair to each other, and a white light will flash rapidly.

Step 7: When a white light starts flashing slowly on the earbuds, they are going to be ready to pair.

Step 8: Select “Soundcore Liberty Neo”. If a password is needed, type “0000”.

Step 9: After that, the pairing will be done.

Soundcore-Liberty-Neo-Manual-1

Soundcore Liberty Neo Manual | How to Wear?

Step 1: Take both earbuds out of the charging case.

Step 2: Identify the left and right earbuds.

Step 3: Choose the ear tips that best suit your ears.

Step 4: Insert the headphones into the inner canal of the ears.

Step 5: Rotate for the best possible comfort and best fit.

Soundcore Liberty Neo Manual | How to Turn On and Off?

Turn on

Automatically: Take the earbuds out of the charging case. A white light will turn on and start flashing, and they will turn on automatically.

Manually: Press and hold the multifunction button on both earbuds for 1 second to turn them on. A white light will turn on and start flashing, and they will turn on.

Soundcore-Liberty-Neo-Manual-2

Turn off

Automatically: Place the earbuds into the charging case. A red light will turn on and the earbuds will turn off.

Manually: Press and hold the multifunction button on both earbuds for 5 seconds to turn them off. A red light will turn on and the earbuds will turn off.

Soundcore-Liberty-Neo-Manual-3

Soundcore Liberty Neo Manual | How to Activate Mono Mode?

To activate the mono mode in the Soundcore Liberty Neo, all you have to do is to pick up one of the earbuds from the charging case, and it will work by itself.

How to Control? / How to Operate? – Instructions

  • Play and pause music: Press the multifunction button on any of the earbuds once.
  • Play the next song: Press and hold the multifunction button on the right earbud for 1 second.
  • Play the previous song: Press and hold the multifunction button on the left earbud for 1 second.
  • Answer an incoming call: Press the multifunction button on any of the earbuds once.
  • End a call: Press the multifunction button on any of the earbuds once.
  • Reject an incoming call: Press and hold the multifunction button on any of the earbuds for 1 second.
  • Put the current call on hold and answer an incoming call: Press the multifunction button on the right earbud once.
  • Switch between a held call and the current call: Press and hold the multifunction button on the right earbud for 1 second.
  • Transfer a call between earbuds and device connected: Press and hold the multifunction button on the right earbud for 1 second.
  • Activate the Voice Assistant: Press the multifunction button on any of the earbuds two times.
Soundcore-Liberty-Neo-Manual-4

Soundcore Liberty Neo Manual | LED Light Status

Earbuds

  • White light flashing rapidly: Earbuds paired to each other.
  • White light flashing slowly: Earbuds ready to pair to device.
  • White light flashing: Earbuds turn on.
  • Red light on: Earbuds turn off.
  • Red light flashing once every minute: Earbuds have low battery.
  • White light on: Earbuds charging.
  • White light off: Earbuds fully charged.
  • Pink light flashing: Earbuds resetting.
  • White light when resetting: Earbuds resetting.
  • Light flashing slowly in the left earbud and rapidly in the right earbud: Resetting completed.

Charging case

  • One light on: Less than 30% of battery.
  • Two lights on: 30% to 70% of battery.
  • Three lights on: 100% of battery.
Soundcore-Liberty-Neo-Manual-5

Soundcore Liberty Neo Manual | How to Charge

Earbuds

To charge the earbuds, all you have to do is to place them into the charging case and close the lid. The earbuds will start charging automatically.

Charging case

To charge the charging case, all you have to do is plug a 5V USB Type-C cable into the port on the charging case. It will start charging automatically.

Soundcore Liberty Neo Manual | How to Reset?

Step 1: Disconnect the earbuds from the connected device.

Step 2: Take the earbuds from the charging case.

Step 3: Press and hold the multifunction button on both earbuds for 5 seconds until a pink light starts flashing.

Step 4: When the light stops flashing and turns off, stop holding the multifunction buttons.

Step 5: Press and hold the multifunction button on both earbuds for 8 seconds until the pink light starts flashing again.

Step 6: When the light stops flashing and turns off, stop holding the multifunction buttons.

Step 7: Place both earbuds into the charging case.

Step 8: When a white light turns on, take both earbuds out of the charging case. A light should flash slowly in the left earbud and rapidly in the right earbud.

Step 9: After that, the resetting will be done.

Soundcore-Liberty-Neo-Manual-6

Some Common Earbuds Problems & Troubleshooting

Left / Right / One side of the earbuds have stopped working

If this happens, it may be because it is low on battery or it did not connect correctly with the device. To fix this, you can do the following:

1. Try charging the earbud that is not working or both, placing them in the charging case.

2. Try factory resetting the earbuds.

3. Check if the earbuds are operating within a normal working range

If that doesn’t work, the earbud is probably faulty, and I can go for a refund or replacement of it.

Left / Right / One side of the earbuds has low volume

If this happens, it may be because the earbuds are dirty or the volume is set low. To fix this, you can do the following:

1. Try cleaning the earbud using a cotton swab or carefully clean the mesh with a pin.

2. Try factory resetting the earbuds.

Microphone not working

If this happens, it can be because the microphone is muted, or the earbuds are badly positioned. To fix this, you can do the following:

If the microphone is muted, check the device microphone volume. If that doesn’t work, that means that there might be a defect in the earbud, so try replacing them or get a refund.

Soundcore Liberty Neo earbuds not connecting to Windows/laptop/PC

If the earbuds are earbuds not connecting, it can be because the Bluetooth on the computer has a pairing problem. To fix this, you can do the following:

1. Try disabling Bluetooth from nearby devices >>> then activate pairing mode of the earbuds, pair and connect earbuds from Settings >>> Bluetooth & other devices >>> Add a new device >>>> elect Bluetooth,

2. Try uninstalling and reinstalling the Bluetooth driver, or update the Bluetooth driver. All can be done in Manage >>> Device Manager, reset earbuds (if available), and then repeat the step.

3. Try resetting the earbuds.

Soundcore-Liberty-Neo-Manual-7
Credits: Tech Genesis

FAQs

Are Soundcore Liberty Neo waterproof?

The Soundcore Liberty Neo have an IPX7 water-resistant rating, meaning that they not only are they against water but they are also protected against the effects of immersion.

Does Soundcore Liberty Neo have a microphone?

Yes, the Soundcore Liberty Neo have integrated microphone.

Do Soundcore Liberty Neo have low latency/gaming mode?

No, the Soundcore Liberty Neo don’t have low latency/gaming mode.

How to know when Soundcore Liberty Neo are fully charged?

When the earbuds are charging, a white light will turn on in the earbuds. When fully charged, that light will turn off.

Can Soundcore Liberty Neo connect to PC and Laptop?

Yes, the Soundcore Liberty Neo can connect to PCs, laptops and tablets.

We hope you now know how to operate the earphone from the above Soundcore Liberty Neo Manual. Want to know anything about the earphones? Do not hesitate to ask in the comments section.

In case you want or need to contact the Soundcore company, all your information can be found on its Support Page, where you can find numbers and emails available for several countries!