Home Audiophile Earbuds Manuals The SoundMagic TWS50 comes with Bluetooth 5.2, the IPX7 certification, a battery life of 5 to 6 hours, a 6mm driver size, a Realtek chipset and much more. Learn how to use them with this new SoundMagic TWS50 Manual. What's Inside ToggleSoundMagic TWS50 Manual | Everything You Need To Know!SoundMagic TWS50 Manual | How to Pair / Connect?SoundMagic TWS50 Manual | How to Wear?SoundMagic TWS50 Manual | How to Activate Mono Mode?SoundMagic TWS50 Manual | How to Turn On And Off?How to Control? / How to Operate? – InstructionsSoundMagic TWS50 Manual | How to ChargeSoundMagic TWS50 Manual | LED Light StatusSoundMagic TWS50 Manual | How to Reset?Some Common Earbuds Problems & TroubleshootingFAQs SoundMagic TWS50 Manual | Everything You Need To Know! SoundMagic TWS50 Manual | How to Pair / Connect? To iOS and Android phones Step 1: Take both earbuds out of the charging case, they will automatically turn on and a blue light will flash 3 times in the earbuds. After that, a red and blue light will flash on the left earbud and a blue light on the right one, and they will be ready to pair to any device. Step 2: Go to the Bluetooth settings. Step 3: Select “SoundMagic TWS50”. If a password is needed, type “0000”. Step 4: After that, the pairing will be done. To PC (Windows) Step 1: Turn on Window’s Bluetooth. Step 2: Go to the settings. Step 3: Go to “Bluetooth and other devices”. Step 4: Click on “Add device”. Step 5: Click on Bluetooth. Step 6: Take both earbuds out of the charging case, they will automatically turn on and a blue light will flash 3 times in the earbuds. After that, a red and blue light will flash on the left earbud and a blue light on the right one, and they will be ready to pair to any device. Step 7: Select “SoundMagic TWS50”. If a password is needed, type “0000”. Step 8: After that, the pairing will be done. Credits: Scarbir SoundMagic TWS50 Manual | How to Wear? Step 1: Choose the ear tips that fit your ears the best. Step 2: Identify the left and right earbuds. Step 3: Rotate the earbuds and pop them into the ear, then shake your head to check the wearing stability. Step 4: Adjust the mic towards the mouth to gain a better calling experience. SoundMagic TWS50 Manual | How to Activate Mono Mode? To activate the mono mode on the SoundMagic TWS50, all you have to do is to pair the earbuds to any device, and then place one of them into the charging case. The other one will start working by itself. SoundMagic TWS50 Manual | How to Turn On And Off? Automatically Turn on: Take the earbuds out of the charging case. They will automatically turn on and a blue light will turn on and start flashing, and the voice prompt “Power on” will be heard. Turn off: Place the earbuds into the charging case. They will automatically turn off and a red light will turn on and start flashing, and the voice prompt “Power off” will be heard. Manually Turn on: Press and hold the multifunction button on any of the earbuds for 5 seconds. A red light will turn on and start flashing, and the voice prompt “Power off” will be heard. Turn off: Press and hold the multifunction button on any of the earbuds for 3 seconds. A blue light will turn on and start flashing, and the voice prompt “Power on” will be heard. How to Control? / How to Operate? – Instructions Play and pause music: Press the multifunction button on any of the earbuds once.Play the next song: Press the multifunction button on any of the earbuds once.Answer an incoming call: Press the multifunction button on any of the earbuds once.End a call: Press the multifunction button on any of the earbuds once.Reject an incoming call: Press and hold the multifunction button on any of the earbuds for 1 second.Activate the Voice Assistant: Press and hold the multifunction button on any of the earbuds for 2 seconds. SoundMagic TWS50 Manual | How to Charge Earbuds To charge the earbuds, all you have to do is to place them into the charging case and close the lid. The earbuds will start charging automatically. Charging case To charge the charging case, all you have to do is plug a 5V USB Type-C cable into the port on the charging case. It will start charging automatically. Credits: Scarbir SoundMagic TWS50 Manual | LED Light Status Earbuds Red light on: Earbuds charging.Red light flashing every 10 seconds: Earbuds have low battery.Red light off: Earbuds fully charged.Blue light flashing 3 times: Earbuds turn on.Red light flashing 3 times: Earbuds turn off.Red and blue light flashing on the left earbud and blue light on the right one: Earbuds ready to pair. Case Green light on: Case charging.Green light off: Case fully charged. SoundMagic TWS50 Manual | How to Reset? Step 1: Place both earbuds into the charging case. Step 2: Press and hold the multifunction button on both earbuds for about 10 seconds until a light starts flashing. Step 3: After that, the resetting will be done, and connect it with any device. Some Common Earbuds Problems & Troubleshooting Left / Right / One side of the earbuds have stopped working If this happens, it may be because it is low on battery or it did not connect correctly with the device. To fix this, you can do the following: 1. Try charging the earbud that is not working or both, placing them in the charging case. 3. Check if the earbuds are operating within a normal working range If that doesn’t work, the earbud is probably faulty, and I can go for a refund or replacement of it.See alsoSoundPEATS Air4 Pro Manual | User Step-by-step GuideGines·April 19, 2024 Left / Right / One side of the earbuds has low volume If this happens, it may be because the earbuds are dirty or the volume is set low. To fix this, you can do the following: 1. Try cleaning the earbud using a cotton swab or carefully clean the mesh with a pin. 2. Try factory reset the earbuds. Microphone not working If this happens, it can be because the microphone is muted, or the earbuds are badly positioned. To fix this, you can do the following: If the microphone is muted, check the device microphone volume. If that doesn’t work, that means that there might be a defect in the earbud, so try replacing them or get a refund. SoundMagic TWS50 earbuds not connecting to Windows/laptop/PC If the earbuds are earbuds not connecting, it can be because the Bluetooth on the computer has a pairing problem. To fix this, you can do the following: 1. Try disabling Bluetooth from nearby devices >>> then activate pairing mode of the earbuds, pair and connect earbuds from Settings >>> Bluetooth & other devices >>> Add a new device >>>> elect Bluetooth, 2. Try uninstalling and reinstalling the Bluetooth driver, or update the Bluetooth driver. All can be done in Manage >>> Device Manager, reset earbuds (if available), and then repeat the step. 3. Try resetting the earbuds. Credits: Scarbir FAQs Are SoundMagic TWS50 waterproof? The SoundMagic TWS50 have an IPX7 water-resistant rating, meaning that they not only are they against water, but they are also protected against the effects of immersion. Does SoundMagic TWS50 have a microphone? Yes, the SoundMagic TWS50 have an integrated microphone. Do SoundMagic TWS50 have low latency/gaming mode? No, the SoundMagic TWS50 don’t have low latency/gaming mode. How to know when SoundMagic TWS50 are fully charged? When the SoundMagic TWS50 are charging, a red light turns on. After they are fully charged, the light turns off. Can SoundMagic TWS50 onnect to PC and Laptop? Yes, the SoundMagic TWS50 can connect to PCs, laptops and tablets. We hope you now know how to operate the earphone from the above SoundMagic TWS50 Manual. Want to know anything about the earphones? Do not hesitate to ask in the comments section. In case you want or need to contact the SoundMagic company, all your information can be found on its Contact Page, where you can find numbers and emails available for several countries!
