Home Audiophile Earbuds Manuals The SoundPEATS Air 3 Deluxe HS earbuds come with specs such as two microphones on each earbud, ENC technology, Game mode technology support, a specialized app, up to 20 hours of total battery life using the charging case, SBC and LDAC audio codec support, the IPX4 dust and sweat-proof certification, and much more. Learn how to use these earbuds using this SoundPEATS Air 3 Deluxe HS manual! If you are interested in purchasing these earbuds, you can easily do it using the Amazon online store. Also, in case you are interested in giving the original manual a look, you can do it here. What's Inside ToggleSoundPEATS Air 3 Deluxe HS Specs SheetSoundPEATS Air 3 Deluxe HS AccessoriesSoundPEATS Air 3 Deluxe HS Manual | Pairing & Charging InstructionsHow To Pair The Earbuds?How to Activate The Mono Mode?How To Control These Earbuds? How To Charge The Earbuds?What Do The Lights Mean?How To Reset The Earbuds?How To Wear These Earbuds?How To Turn On And Off?Do These Earbuds Have An App?Some Common Problems & TroubleshootingFAQs SoundPEATS Air 3 Deluxe HS Specs Sheet ModelSoundPEATS Air 3 Deluxe HSWeightEarbuds: About 4 grams per earbud Charging case: About 33 gramsWaterproof/IP ratings IPX4Bluetooth version V5.3Range/Distance10 metersConnectivity Port/Charging CableType-CAudio Decoding SBC, LDACDriver 14.2mmSpeaker frequency response20Hz – 40kHzBattery Life Earbuds: Around 5 hours Charging case: Around 15 hoursCharging Time Earbuds: Around 1.5 hours Charging case: Around 1.5 hoursApp Support Yes, the SoundPEATS appControls/Features Play and pause a song, play the next and previous song, turn the volume up and down, answer, end, and reject a call, voice assistant, switch between two calls, Game modeAccessories Charging case, USB cable, user manual, app introductionPriceAround 50 USD SoundPEATS Air 3 Deluxe HS Accessories The earbuds come with the following accessories: Charging case. USB cable. User manual. App introduction. Credits: Sir Apfelot SoundPEATS Air 3 Deluxe HS Manual | Pairing & Charging Instructions How To Pair The Earbuds? To Android And iOS Devices Step 1: Open the lid of the charging case. After that, the earbuds will turn on automatically and pair with each other. Step 2: Press the button on the case for about 3 seconds, or until a white light starts flashing. The earbuds will now be ready to pair with any device. Step 3: Unlock the desired device. Step 4: Go to the device’s settings. Step 5: Turn on Bluetooth on the desired device. Step 6: Search for a new device. Step 7: Select the SOUNDPEATS Air3 Deluxe HS earbuds. If a password is needed, type “0000” or “1234”. After that, the pairing will be done. To Windows (PC) Step 1: Turn on the Window’s Bluetooth. Step 2: Go to the settings. Step 3: Go to “Bluetooth and other devices”. Step 4: Click on “Add device”. Step 5: Click on Bluetooth. Step 6: Open the lid of the charging case. After that, the earbuds will turn on automatically and pair with each other. Step 7: Press the button on the case for about 3 seconds, or until a white light starts flashing. The earbuds will now be ready to pair with any device. Step 8: Select the SOUNDPEATS Air3 Deluxe HS earbuds. If a password is needed, type “0000” or “1234”. After that, the pairing will be done. How to Activate The Mono Mode? To activate or deactivate the mono mode in these earbuds, all you have to do is pair the earbuds to the device and take out one of the earbuds from the charging case. It will start working by itself. How To Control These Earbuds? NOTE: The touch sensor is placed on the upper part of the body of the earbuds. Auto-pause a song: Take the earbuds out of the ear canal. Auto-play a song: Place the earbuds into the ear canal. Play and pause a song: Press the touch sensor on any of the earbuds two times. Turn the volume up: Press the touch sensor on the right earbud one time. Turn the volume down: Press the touch sensor on the left earbud one time. Play the next song: Press and hold the touch sensor on the right earbud for about 1.5 seconds. Play the previous song: Press and hold the touch sensor on the left earbud for about 1.5 seconds. Answer an incoming call: Press the touch sensor on any of the earbuds two times. End a current call: Press the touch sensor on any of the earbuds two times. Reject an incoming call: Press and hold the touch sensor on any of the earbuds for about 1.5 seconds. Activate the voice assistant: Press the touch sensor on the right earbud three times. Switch between two calls: Press and hold the touch sensor on any of the earbuds for about 2 seconds. Activate/deactivate the Game mode: Press the touch sensor on the left earbud three times. How To Charge The Earbuds? Earbuds To charge the earbuds, all you have to do is place them into the charging case and close its lid. The earbuds will start charging automatically. Charging Case To charge the charging case, all you have to do is connect the case to a USB charger or charging port. It will start charging automatically. What Do The Lights Mean? Charging Case A white light flashes: The earbuds are in pairing mode. A white light flashes two times while resetting: The earbuds are resetting. A green light on: The case has between 50% and 100% of battery. A yellow light on: The case has between 10% and 49% of battery. A red light on: The case has 10% of battery or less. A red light flashes while charging: The case has between 0% and 19% of battery. A yellow light flashes while charging: The case has between 20% and 69% of battery. A green light flashes while charging: The case has between 70% and 99% of battery. A green light on while charging: The case has 100% of battery. How To Reset The Earbuds? Step 1: Place the earbuds on the charging case and keep the lid open. Step 2: Press the button on the case for about 10 seconds, or until a white light flashes two times. Step 3: Close the lid of the charging case. Step 4: Open the lid again. The earbuds will turn on. How To Wear These Earbuds? Step 1: Take both earbuds out of the charging case. Step 2: Identify the left and right earbuds. Step 3: Choose the ear tips that best suit your ears. Step 4: Insert the headphones into the inner canal of the ears. Step 5: Rotate for the best possible comfort and best fit, and make sure that the microphone is pointing to the mouth. How To Turn On And Off? Turn On Automatically: Open the lid of the charging case. After that, the earbuds will turn on automatically. Manually: Press and hold the touch sensor on both earbuds for about 1.5 seconds. After that, the earbuds will turn on. Turn Off Automatically: Place the earbuds into the charging case and close its lid. After that, the earbuds will turn off automatically. Manually: Press and hold the touch sensor on both earbuds for about 10 seconds. After that, the earbuds will turn off. Do These Earbuds Have An App? Yes! These earbuds do come with a specialized app called SOUNDPEATS, which is available in both the Play Store and App Store. Through the app, you can see the battery percentage of the earbuds, in addition to various features being available, such as controlling the volume level, configuring the Equalizer and the Game mode, as well as the various controls of the earbuds. In addition to that, you can also find general information about the earbuds and the app, as well as the possibility of resetting the earbuds through the app and a company store.See alsoBlackview Airbuds 60 Manual | All You Need To KnowGines·April 21, 2024 Some Common Problems & Troubleshooting Left/Right/One side of the earbuds has stopped working If this happens, it may be because it is low on battery or it did not connect correctly with the device. To fix this, you can do the following: 1. Try charging the earbud that is not working or both, placing them in the charging case. 2. Try factory resetting the earbuds. 3. Check if the earbuds are operating within a normal working range. If that doesn’t work, the earbud is probably faulty, and I can go for a refund or replacement of it. Left/Right/One side of the earbuds has a low volume If this happens, it may be because the earbuds are dirty or the volume is set low. To fix this, you can do the following: 1. Try cleaning the earbud using a cotton swab or carefully clean the mesh with a pin. 2. Try factory resetting the earbuds. The microphone is not working If this happens, it can be because the microphone is muted, or the earbuds are badly positioned. To fix this, you can do the following: If the microphone is muted, check the device microphone volume. If that doesn’t work, that means that there might be a defect in the earbuds, so try replacing them or getting a refund. The earbuds are not connecting to Windows/laptop/PC If the earbuds are not connecting, it can be because the Bluetooth on the computer has a pairing problem. To fix this, you can do the following: 1. Try disabling Bluetooth from nearby devices >>> then activate the pairing mode of the earbuds, pair and connect earbuds from Settings >>> Bluetooth & other devices >>> Add a new device >>>> Select Bluetooth. 2. Try uninstalling and reinstalling the Bluetooth driver, or updating the Bluetooth driver. All can be done in Manage >>> Device Manager, reset earbuds (if available), and then repeat the step. 3. Try resetting the earbuds. Credits: GTechMx FAQs Do the SoundPEATS Air 3 Deluxe HS have a microphone? Yes, the earbuds come with integrated microphones. Do the SoundPEATS Air 3 Deluxe HS have a low latency/gaming mode? Yes, these earbuds have a low latency/gaming mode. Can the SoundPEATS Air 3 Deluxe HS connect to PCs and laptops? Yes, these earbuds can connect to PCs and laptops. Are the SoundPEATS Air 3 Deluxe HS noise-canceling? No, these earbuds don’t come with noise-cancellation technology. Are the SoundPEATS Air 3 Deluxe HS waterproof? No, these earbuds are not waterproof (IPX6 and up). They have a rating of IPX4, which means they’re splash and sweat-resistant. We hope you now know how to operate the earbuds from the above SoundPEATS Air 3 Deluxe HS manual. Want to know anything about the earbuds? Do not hesitate to ask in the comment section below.