SoundPEATS Q Buds Manual | Step-by-step Guide 2021

The SoundPEATS Q Buds have 4 microphones, a 10mm dynamic driver, Bluetooth 5.0, HFP, A2DP, AVRCP, SBC, AAC, around 7 hours listening on a full charge, and up to 21 hours of music playback with the charging case, the IPX5 sweat and water-proof certification, and much more. Learn how to use them with this new SoundPEATS Q Buds Manual.

SoundPEATS Q Buds Manual | Everything You Need To Know!

SoundPEATS Q Buds Manual | How to Pair / Connect?

To iOS and Android phones

Step 1: Open the lid of the charging case. The earbuds will turn on and pair to each other automatically.

Step 2: Press and hold the multifunction touch button on both earbuds for 3 seconds. When a blue light turns on, they will be ready to pair to any device.

Step 3: Go to the device’s Bluetooth settings.

Step 4: Select “SoundPEATS Q”. If a password is needed, type “0000”.

Step 5: After that, the pairing will be done.

To PC (Windows)

Step 1: Turn on Window’s Bluetooth.

Step 2: Go to the settings.

Step 3: Go to “Bluetooth and other devices”.

Step 4: Click on “Add device”.

Step 5: Click on Bluetooth.

Step 6: Open the lid of the charging case. The earbuds will turn on and pair to each other automatically.

Step 7: Press and hold the multifunction touch button on both earbuds for 3 seconds. When a blue light turns on, they will be ready to pair to any device.

Step 8: Select “SoundPEATS Q”. If a password is needed, type “0000”.

Step 9: After that, the pairing will be done.

SoundPEATS Q Buds Manual | How to Wear?

Step 1: Take both earbuds out of the charging case.

Step 2: Identify the left and right earbuds.

Step 3: Choose the ear tips that best suit your ears.

Step 4: Insert the headphones into the inner canal of the ears.

Step 5: Rotate for the best possible comfort and best fit, and make sure that the microphone is pointing to the mouth.

SoundPEATS Q Buds Manual | How to Turn On and Off?

Turn on

Automatically: Open the lid of the charging case. After that, they will turn on automatically.

Manually: Press and hold the multifunction touch button on both earbuds for 1.5 seconds. After that, the earbuds will turn on.

Turn off

Automatically: Place the earbuds inside of the charging case and close its lid. After that, the earbuds will turn off automatically.

Manually: Press and hold the multifunction touch button on both earbuds for 10 seconds. After that, the earbuds will turn off.

How to Control? / How to Operate? – Instructions

• Play or pause music: Press the multifunction touch button on any of the earbuds two times.
• Play the next song: Press and hold the multifunction touch button on the right earbud for 1.5 seconds.
• Play the previous song: Press and hold the multifunction touch button on the left earbud for 1.5 seconds.
• Turn the volume up: Press the multifunction touch button on the right earbud one time.
• Turn the volume down: Press the multifunction touch button on the left earbud one time.
• Answer an incoming call: Press the multifunction touch button on any of the earbuds two times.
• End a call: Press the multifunction touch button on any of the earbuds two times.
• Reject an incoming call: Press and hold the multifunction touch button on any of the earbuds for 1.5 seconds.
• Switch between two calls: Press and hold the multifunction touch button on any of the earbuds for 2 seconds.
• Activate the voice assistant: Press the multifunction touch button on any of the earbuds three times.

SoundPEATS Q Buds Manual | How to Activate Mono Mode?

To activate the mono mode in the SoundPEATS Q Buds, all you have to do is to take the desired earbud out of the charging case. It will automatically turn on and start working by itself.

SoundPEATS Q Buds Manual | How to Reset?

Step 1: Clear the pairing record between the earbuds and the connected devices.

Step 2: Place both earbuds into the charging case and keep the lid open.

Step 3: Press and hold the multifunction touch button on both earbuds for about 10 seconds.

Step 4: After that, the resetting will be done.

SoundPEATS Q Buds Manual | LED Light Status

Earbuds

• Blue light turns on: Earbuds ready to pair to any device.
• Light on: Earbuds charging.
• Light off: Earbuds fully charged.

Charging case

• Green light on: 10% to 50% of battery.
• Yellow light on: 10% to 49% of battery.
• Red light on: Less than 10% of battery.

SoundPEATS Q Buds Manual | How to Charge

Earbuds

To charge the earbuds, all you have to do is to place them into the charging case and close the lid. The earbuds will start charging automatically.

Charging case

To charge the charging case, all you have to do is to connect the case to a USB charger or charging port with the included USB-A to C cable. It will start charging automatically.

Some Common Earbuds Problems & Troubleshooting

Left / Right / One side of the earbuds have stopped working

If this happens, it may be because it is low on battery or it did not connect correctly with the device. To fix this, you can do the following:

1. Try charging the earbud that is not working or both, placing them in the charging case.

2. Try factory resetting the earbuds.

If that doesn’t work, the earbud is probably faulty, and I can go for a refund or replacement of it.

Left / Right / One side of the earbuds has low volume

If this happens, it may be because the earbuds are dirty or the volume is set low. To fix this, you can do the following:

1. Try cleaning the earbud using a cotton swab or carefully clean the mesh with a pin.

2. Try factory resetting the earbuds.

Microphone not working

If this happens, it can be because the microphone is muted, or the earbuds are badly positioned. To fix this, you can do the following:

If the microphone is muted, check the device microphone volume. If that doesn’t work, that means that there might be a defect in the earbud, so try replacing them or get a refund.

SoundPEATS Q Buds not connecting to Windows/laptop/PC

If the earbuds are earbuds not connecting, it can be because the Bluetooth on the computer has a pairing problem. To fix this, you can do the following:

1. Try disabling Bluetooth from nearby devices >>> then activate pairing mode of the earbuds, pair and connect earbuds from Settings >>> Bluetooth & other devices >>> Add a new device >>>> elect Bluetooth,

2. Try uninstalling and reinstalling the Bluetooth driver, or update the Bluetooth driver. All can be done in Manage >>> Device Manager, reset earbuds (if available), and then repeat the step.

3. Try resetting the earbuds.

FAQs

We hope you now know how to operate the earphone from the above SoundPEATS Q Buds Manual. Want to know anything about the earphones? Do not hesitate to ask in the comments section.

In case you want or need to contact the SoundPEATS company, all your information can be found on its Contact Us page, where you can find numbers and emails available for several countries! Also, they have a Support page, with FAQs and information about their products!