SoundPEATS-TrueDot-Manual-4

SoundPEATS TrueDot Manual | Step-by-step Guide 2021

The SoundPEATS TrueDot have specifications such as an IPX4 waterproof certification, 4 hours of listening on a full Charge, Bluetooth 5.0 with Realtek-chipset and AAC codec, and much more. Today we are going to teach you how to use them correctly in this new SoundPEATS TrueDot Manual.

SoundPEATS TrueDot Manual | Everything You Need To Know!

SoundPEATS TrueDot Manual | How to Pair / Connect?

To iOS and Android phones

Step 1: Take both earbuds out of the charging case. The earbuds will automatically turn on and pair to each other, and a white light will turn on. After that, the light on the left earbud turns off, and the light on the right earbud turns red so they are ready to pair.

Step 2: Turn on the Bluetooth on the desired device.

Step 3: Go to the Bluetooth settings.

Step 4: Select “SOUNDPEATS TrueDot”, and you will hear the voice prompt “connected”. If a password is needed, type “0000”.

Step 5: After that, the pairing will be done.

To PC (Windows)

Step 1: Turn on Window’s Bluetooth.

Step 2: Go to the settings.

Step 3: Go to “Bluetooth and other devices”.

Step 4: Click on “Add device”.

Step 5: Click on Bluetooth.

Step 6: Take both earbuds out of the charging case. The earbuds will automatically turn on and pair to each other, and a white light will turn on. After that, the light on the left earbud turns off, and the light on the right earbud turns red so they are ready to pair.

Step 7: Select “SOUNDPEATS TrueDot”, and you will hear the voice prompt “connected”. If a password is needed, type “0000”.

Step 8: After that, the pairing will be done.

SoundPEATS-TrueDot-Manual-1

SoundPEATS TrueDot Manual | How to Charge

Earbuds

To charge the earbuds, all you have to do is to place them into the charging case and close the lid. The earbuds will start charging automatically and their LED lights will turn red.  

Charging case

To charge the charging case, all you have to do is plug a 5V USB Type-C cable into the port on the charging case. It will start charging automatically.

SoundPEATS TrueDot Manual | | How To Wear?

Step 1: Choose the ear tips that fit your ears the best.

Step 2: Identify the left and right earbuds.

Step 3: Insert the earbuds into the canal of the ears. Turn them around and make sure to find the most comfortable position.

SoundPEATS-TrueDot-Manual-2
Credits: Awaqa

How to Control? / How to Operate? – Instructions

  • Play and pause music: Click the multifunction button on the right earbud once.
  • Play the next song: Press and hold the multifunction button on the right earbud for 2 seconds.
  • Play the previous song: Press and hold the multifunction button on the left earbud for 2 seconds.
  • Answer an incoming call: Click the multifunction button on the right earbud once.
  • End a call: Click the multifunction button on the right earbud once.
  • Reject an incoming call: Press and hold the multifunction button on the right earbud for 2 seconds.
  • Switch between two calls: Press and hold the multifunction button on the right earbud for 2 seconds.
  • Activate Voice Assistant: Click the multifunction button on the left earbud twice.
SoundPEATS-TrueDot-Manual-3

SoundPEATS TrueDot Manual | LED Light Status

Earbuds

  • White light on: Earbuds turning on.
  • Light on the left earbud turns off, light on the right earbud turns red: Earbuds ready to pair.
  • Red light blinking 3 times: Earbuds resetting.
  • Red light when charging: Earbuds charging.
  • White light on for 1 minute when charging: Earbuds fully charged.

SoundPEATS TrueDot Manual | How to Reset?

Step 1: Clear the pairing record between the earbuds and all the connected devices.

Step 2: Take the earbuds out of the charging case.

Step 3: Press and hold the multifunction button on both earbuds for 10 seconds, until a red light blinks 3 times.

Step 4: After that, the resetting will be done.

SoundPEATS-TrueDot-Manual-4

Some Common Earbuds Problems & Troubleshooting

Left / Right / One side of the earbuds have stopped working

If this happens, it may be because it is low on battery or it did not connect correctly with the device. To fix this, you can do the following:

1. Try charging the earbud that is not working or both, placing them in the charging case.

2. Try factory reset the earbuds.

3. Check if the earbuds are operating within a normal working range

If that doesn’t work, the earbud is probably faulty, and I can go for a refund or replacement of it.

Left / Right / One side of the earbuds has low volume

If this happens, it may be because the earbuds are dirty or the volume is set low. To fix this, you can do the following:

1. Try cleaning the earbud using a cotton swab or carefully clean the mesh with a pin.

2. Try factory reset the earbuds.

Microphone not working

If this happens, it can be because the microphone is muted, or the earbuds are badly positioned. To fix this, you can do the following:

If the microphone is muted, check the device microphone volume. If that doesn’t work, that means that there might be a defect in the earbud, so try replacing them or get a refund.

SoundPEATS TrueDot earbuds not connecting to Windows/laptop/PC

If the earbuds are earbuds not connecting, it can be because the Bluetooth on the computer has a pairing problem. To fix this, you can do the following:

1. Try disabling Bluetooth from nearby devices >>> then activate pairing mode of the earbuds, pair and connect earbuds from Settings >>> Bluetooth & other devices >>> Add a new device >>>> elect Bluetooth,

2. Try uninstalling and reinstalling the Bluetooth driver, or update the Bluetooth driver. All can be done in Manage >>> Device Manager, reset earbuds (if available), and then repeat the step.

3. Try resetting the earbuds as said in the pairing section above.

SoundPEATS-TrueDot-Manual-5
Credits: Scarbir

FAQs

Are the SoundPEATS TrueDot waterproof?

The SoundPEATS TrueDot have the IPX4 certification, which means they’re dustproof and protected against dust and splashes.

Does SoundPEATS TrueDot have a microphone?

Yes, the SoundPEATS TrueDot have an integrated microphone.

Do SoundPEATS TrueDot have low latency/gaming mode?

No, the SoundPEATS TrueDot don’t have low latency/gaming mode.

How to know when SoundPEATS TrueDot are fully charged?

When the SoundPEATS TrueDot are charging, their LED light turns on red. When fully charged, the lights turn white for 1 minute and then turn off.

Can SoundPEATS TrueDot connect to PC and Laptop?

Yes, the SoundPEATS TrueDot can connect to PCs, laptops and tablets.

We hope you now know how to operate the earphone from the above SoundPEATS TrueDot Manual. Want to know anything about the earphones? Do not hesitate to ask in the comments section.

In case you want or need to contact the SoundPEATS company, all your information can be found on its Contact Us page, where you can find numbers and emails available for several countries! Also, they have a Support page, with FAQs and information about their products!