SoundPEATS-TrueShift-2-Manual-5

SoundPEATS TrueShift 2 Manual | In-depth Guide 2021

Aliexpress banner

The SoundPEATS TrueShift 2 comes with Bluetooth 5.0 with HSP1.2, HFP1.6, and A2DP1.3 profiles, the IPX7 certification, battery life of 6 hours, a 6mm dynamic driver, and much more. Learn how to use them with this new SoundPEATS TrueShift 2 Manual.

SoundPEATS TrueShift 2 Manual | Everything You Need To Know!

SoundPEATS TrueShift 2 Manual | How to Pair / Connect?

To iOS and Android phones

Step 1: Take both earbuds out of the charging case. The earbuds will automatically turn on and pair to each other. When a white light on the left earbud turns on and a red and white light flashes alternately on the right earbud, they will be ready to pair.

Step 2: Go to the Bluetooth settings.

Step 3: Select “SoundPEATS TrueShift2”. If a password is needed, type “0000”.

Step 4: After that, the pairing will be done.

To PC (Windows)

Step 1: Turn on Window’s Bluetooth.

Step 2: Go to the settings.

Step 3: Go to “Bluetooth and other devices”.

Step 4: Click on “Add device”.

Step 5: Click on Bluetooth.

Step 6: Take both earbuds out of the charging case. The earbuds will automatically turn on and pair to each other. When a white light on the left earbud turns on and a red and white light flashes alternately on the right earbud, they will be ready to pair.

Step 7: Select “SoundPEATS TrueShift2”. If a password is needed, type “0000”.

Step 8: After that, the pairing will be done.

SoundPEATS-TrueShift-2-Manual-1
Credits: Awaqa

SoundPEATS TrueShift 2 Manual | How to Wear?

Step 1: Take both earbuds out of the charging case.

Step 2: Identify the left and right earbuds.

Step 3: Choose the ear tips that best suit your ears.

Step 4: Insert the headphones into the inner canal of the ears.

Step 5: Rotate for the best possible comfort and best fit.

SoundPEATS-TrueShift-2-Manual-2

SoundPEATS TrueShift 2 Manual | How to Turn On and Off?

Turn on

Automatically: Take both earbuds out of the charging case. They will turn on automatically.

Manually: Press and hold the multifunction touch button on both earbuds for 1.5 seconds. The earbuds will turn on.

Turn off

Automatically: Place the earbuds into the charging case. They will turn off automatically.

Manually: Press and hold the multifunction touch button on both earbuds for 10 seconds. The earbuds will turn off.

How to Control? / How to Operate? – Instructions

  • Play or pause music: Press the multifunction touch button on any of the earbuds two times.
  • Turn the volume up: Press the multifunction touch button on the right earbud once.
  • Turn the volume down: Press the multifunction touch button on the left earbud once.
  • Play the next song: Press and hold the multifunction touch button on the right earbud for 1.5 seconds.
  • Play the previous song: Press and hold the multifunction touch button on the left earbud for 1.5 seconds.
  • Answer an incoming call: Press the multifunction touch button on any of the earbuds two times.
  • End a call: Press the multifunction touch button on any of the earbuds two times.
  • Reject an incoming call: Press and hold the multifunction touch button on any of the earbuds for 1.5 seconds.
  • Switch between two active calls: Press and hold the multifunction button on any of the earbuds for 2 seconds.
  • Activate the Voice Assistant: Press the multifunction touch button on any of the earbuds three times.
SoundPEATS-TrueShift-2-Manual-3

SoundPEATS TrueShift 2 Manual | How to Activate Mono Mode?

To activate the mono mode in the SoundPEATS TrueShift 2, all you have to do is to pick up one of the earbuds from the charging case, and it will work by itself.

SoundPEATS TrueShift 2 Manual | How to Charge

Earbuds

To charge the earbuds, all you have to do is to place them into the charging case and close the lid. The earbuds will start charging automatically.

Charging case

To charge the charging case, all you have to do is plug a 5V USB Type-C cable into the port on the charging case. It will start charging automatically.

SoundPEATS-TrueShift-2-Manual-4

SoundPEATS TrueShift 2 Manual | How to Reset?

Step 1: Disconnect the earbuds from the connected device.

Step 2: Place the earbuds into the charging case and keep the lid open.

Step 3: Press and hold the multifunction touch button on both earbuds for about 10 seconds, until white and red lights on the earbuds flash twice.

Step 4: After that, the resetting will be done.

SoundPEATS TrueShift 2 Manual | LED Light Status

Earbuds

  • White light on the left earbud and red and white light flashing alternately on the right earbud: Earbuds ready to pair to any device.
  • Red light on: Earbuds charging.
  • Red light off: Earbuds fully charged.
  • Light turns on and flashes white and red twice: Earbuds resetting.

Charging case

If the earbuds are placed in the charging case and no light turns on in them, it means that the case has no battery and must be charged.

SoundPEATS-TrueShift-2-Manual-8

Some Common Earbuds Problems & Troubleshooting

Left / Right / One side of the earbuds have stopped working

If this happens, it may be because it is low on battery or it did not connect correctly with the device. To fix this, you can do the following:

1. Try charging the earbud that is not working or both, placing them in the charging case.

2. Try factory resetting the earbuds.

3. Check if the earbuds are operating within a normal working range.

If that doesn’t work, the earbud is probably faulty, and I can go for a refund or replacement of it.

Left / Right / One side of the earbuds has low volume

If this happens, it may be because the earbuds are dirty or the volume is set low. To fix this, you can do the following:

1. Try cleaning the earbud using a cotton swab or carefully clean the mesh with a pin.

2. Try factory resetting the earbuds.

Microphone not working

If this happens, it can be because the microphone is muted, or the earbuds are badly positioned. To fix this, you can do the following:

If the microphone is muted, check the device microphone volume. If that doesn’t work, that means that there might be a defect in the earbud, so try replacing them or get a refund.

SoundPEATS TrueShift 2 earbuds not connecting to Windows/laptop/PC

If the earbuds are earbuds not connecting, it can be because the Bluetooth on the computer has a pairing problem. To fix this, you can do the following:

1. Try disabling Bluetooth from nearby devices >>> then activate pairing mode of the earbuds, pair and connect earbuds from Settings >>> Bluetooth & other devices >>> Add a new device >>>> elect Bluetooth,

2. Try uninstalling and reinstalling the Bluetooth driver, or update the Bluetooth driver. All can be done in Manage >>> Device Manager, reset earbuds (if available), and then repeat the step.

3. Try resetting the earbuds.

SoundPEATS-TrueShift-2-Manual-5
Credits: Eardopes.com

FAQs

Are SoundPEATS TrueShift 2 waterproof?

The SoundPEATS TrueShift 2 have an IPX7 water-resistant rating, meaning that they not only are they against water but they are also protected against the effects of immersion.

Does SoundPEATS TrueShift 2 have a microphone?

Yes, the SoundPEATS TrueShift 2 have integrated microphones.

Do SoundPEATS TrueShift 2 have low latency/gaming mode?

No, the SoundPEATS TrueShift 2 don’t have low latency/gaming mode.

How to know when SoundPEATS TrueShift 2 are fully charged?

When the earbuds are charging, a red light will turn on in the earbuds. When fully charged, that light will turn off.

Can SoundPEATS TrueShift 2 connect to PC and Laptop?

Yes, the SoundPEATS TrueShift 2 can connect to PCs, laptops and tablets.

We hope you now know how to operate the earphone from the above SoundPEATS TrueShift 2 Manual. Want to know anything about the earphones? Do not hesitate to ask in the comments section.

In case you want or need to contact the SoundPEATS company, all your information can be found on its Contact Us page, where you can find numbers and emails available for several countries! Also, they have a Support page, with FAQs and information about their products!