Stador-T69-Manual-7

Stador T69 Manual | Step-by-step, In-depth Guide

The Stador T69 earbuds come with specs such as a light weight of only 4 grams per earbud, 13mm speakers and triple-layer composite diaphragms, Bluetooth 5.3 technology, a total battery life of up to 56 hours thanks to the 400mAh battery on the charging case, support for the HSP/HFP/AVRCP/A2DP profiles, the amazing IPX7 waterproof certification, and much more. Learn how to use these earbuds using this Stador T69 manual!

If you are interested in purchasing these earbuds, you can easily do it using the Amazon online store. Also, in case you are interested in giving the original manual a look, you can do it here.

Stador T69 Specs Sheet

ModelStador T69
WeightEarbuds: Around 4 grams each
Charging case: Around 38 grams
Waterproof/IP ratings  IPX7
Bluetooth version          V5.3
Range/Distance10 meters
Connectivity Port/Charging CableType-C
Audio Decoding               SBC
Driver  13mm
Speaker frequency response20Hz – 20kHz
Battery Life       Earbuds: About 7 hours
Charging case: About 49 hours
Charging Time  Earbuds: Around 1.1 hours
Charging case: About 2 hours
App Support     No
Controls/Features         Play and pause a song, play the next and previous song, answer, end, and reject a call, turn the volume up and down, voice assistant
Accessories       Charging case, USB cable, user manual
PriceAround 40 USD

Stador T69 Accessories

The earbuds come with the following accessories:

  • Charging case.
  • USB cable.
  • User manual.
Stador-T69-Manual-1

Stador T69 Manual | Instructions & Troubleshooting

How To Wear These Earbuds?

Step 1: Take both earbuds out of the charging case.

Step 2: Identify the left and right earbuds.

Step 3: Choose the ear tips that best suit your ears.

Step 4: Insert the headphones into the inner canal of the ears.

Step 5: Rotate for the best possible comfort and best fit, and make sure that the microphone is pointing to the mouth.

How To Turn On And Off?

Turn On

Automatically: Open the lid of the charging case. After that, the earbuds will turn on automatically.

Manually: Press and hold the touch control area on both earbuds for about 2 seconds. After that, the earbuds will turn on.

Turn Off

Automatically: Place the earbuds into the charging case and close its lid. After that, the earbuds will turn off automatically.

Manually: Press and hold the touch control area on both earbuds for about 5 seconds. After that, the earbuds will turn off.

How To Pair The Earbuds?

To Android And iOS Devices

Step 1: Open the lid of the charging case. After that, the earbuds will turn on automatically and pair with each other.

A red and blue light will start flashing in one of the earbuds and a blue light will flash slowly on the other one, meaning that the earbuds are now ready to pair with any device.

Step 2: Unlock the desired device.

Step 3: Go to the device’s settings.

Step 4: Turn on Bluetooth on the desired device.

Step 5: Search for a new device.

Step 6: Select the T69 earbuds. If a password is needed, type “0000” or “1234”.

After that, the “Connected” voice prompt will sound, the flashing lights will turn off, and the pairing will be done.

To Windows (PC)

Step 1: Turn on the Window’s Bluetooth.

Step 2: Go to the settings.

Step 3: Go to “Bluetooth and other devices”.

Step 4: Click on “Add device”.

Step 5: Click on Bluetooth.

Step 6: Open the lid of the charging case. After that, the earbuds will turn on automatically and pair with each other.

A red and blue light will start flashing in one of the earbuds and a blue light will flash slowly on the other one, meaning that the earbuds are now ready to pair with any device.

Step 7: Select the T69 earbuds. If a password is needed, type “0000” or “1234”.

After that, the “Connected” voice prompt will sound, the flashing lights will turn off, and the pairing will be done.

How To Control These Earbuds?

NOTE: The touch control area is placed on the top part of the stem of the earbuds.

  • Play or pause a song: Press the touch control area on any of the earbuds one time.
  • Play the next song: While listening to music, press the touch control area on the right earbud two times.
  • Play the previous song: While listening to music, press the touch control area on the left earbud two times.
  • Turn the volume up: Press and hold the touch control area on the right earbud.
  • Turn the volume down: Press and hold the touch control area on the left earbud.
  • Answer an incoming call: Press the touch control area on any of the earbuds one time.
  • End a current call: Press the touch control area on any of the earbuds two times.
  • Reject an incoming call: Press and hold the touch control area on any of the earbuds for about 2 seconds.
  • Activate the voice assistant: Press the touch control area on any of the earbuds three times.

How To Reset And Re-Pair These Earbuds?

Step 1: Delete the T69 earbuds from the devices’ Bluetooth list.

Step 2: Turn off Bluetooth on the device.

Step 3: Take both earbuds out of the case. Wait until one of the earbuds flashes red and blue alternately and another flashes blue slowly.

Step 4: Press the multifunction touch button on both earbuds six times. The “Power off” voice prompt will sound and the earbuds will turn off. This will reset them.

Step 5: Place the earbuds into the case and wait for a couple of seconds.

Step 6: Take the earbuds out of the case. After that, the earbuds will turn on automatically and pair with each other.

A red and blue light will start flashing in one of the earbuds and a blue light will flash slowly on the other one, meaning that the earbuds are now ready to pair with any device.

Step 7: Turn on Bluetooth on the desired device.

Step 8: Search for a new device.

Step 9: Select the T69 earbuds. If a password is needed, type “0000” or “1234”.

After that, the “Connected” voice prompt will sound, the flashing lights will turn off, and the pairing will be done.

Stador-T69-Manual-5

How To Charge The Earbuds?

Earbuds

To charge the earbuds, all you have to do is place them into the charging case and close its lid. The earbuds will start charging automatically.

Charging Case

To charge the charging case, all you have to do is connect the case to a USB charger or charging port. It will start charging automatically. Also, it can be charged using a wireless charger.

What Do The Lights Mean?

Earbuds

  • A red and blue light flashes in one of the earbuds and a blue light flashes slowly on the other one: The earbuds are ready to pair with any device.
  • Said flashing lights turn off: The earbuds are now connected.

Charging Case

  • 0 to 99 appears on the display while charging: The case is charging.
  • A 100 appears on the display while charging: The case is fully charged.
  • Flashing down and up design with the earbuds inside: The earbuds are charging.
  • No flashing design with the earbuds inside: The earbuds are fully charged.

The Earbuds’ Voice Prompts

  • Connected: The earbuds are now connected.
  • Power off: The earbuds turn off.

Do These Earbuds Have An App?

Sadly, these earbuds don’t come with app support.

Some Common Problems & Troubleshooting

Left/Right/One side of the earbuds has stopped working

If this happens, it may be because it is low on battery or it did not connect correctly with the device. To fix this, you can do the following:

1. Try charging the earbud that is not working or both, placing them in the charging case.

2. Try factory resetting the earbuds.

3. Check if the earbuds are operating within a normal working range.

If that doesn’t work, the earbud is probably faulty, and I can go for a refund or replacement of it.

Left/Right/One side of the earbuds has a low volume

If this happens, it may be because the earbuds are dirty or the volume is set low. To fix this, you can do the following:

1. Try cleaning the earbud using a cotton swab or carefully clean the mesh with a pin.

2. Try factory resetting the earbuds.

The microphone is not working

If this happens, it can be because the microphone is muted, or the earbuds are badly positioned. To fix this, you can do the following:

If the microphone is muted, check the device microphone volume. If that doesn’t work, that means that there might be a defect in the earbuds, so try replacing them or getting a refund.

The earbuds are not connecting to Windows/laptop/PC

If the earbuds are not connecting, it can be because the Bluetooth on the computer has a pairing problem. To fix this, you can do the following:

1. Try disabling Bluetooth from nearby devices >>> then activate the pairing mode of the earbuds, pair and connect earbuds from Settings >>> Bluetooth & other devices >>> Add a new device >>>> Select Bluetooth.

2. Try uninstalling and reinstalling the Bluetooth driver, or updating the Bluetooth driver. All can be done in Manage >>> Device Manager, reset earbuds (if available), and then repeat the step.

3. Try resetting the earbuds.

Stador-T69-Manual-7

FAQs

Are the Stador T69 waterproof?

Yes, these earbuds are waterproof (IPX6 and up). They have a rating of IPX7, meaning that they not only are against water but are also protected against the effects of immersion.

Do the Stador T69 have a microphone?

Yes, the earbuds come with integrated microphones.

Do the Stador T69 have a low latency/gaming mode?

No, these earbuds don’t have a low latency/gaming mode.

Can the Stador T69 connect to PCs and laptops?

Yes, these earbuds can connect to PCs and laptops.

Are the Stador T69 noise-canceling?

No, these earbuds don’t come with noise-cancellation technology.

We hope you now know how to operate the earbuds from the above Stador T69 manual. Want to know anything about the earphones? Do not hesitate to ask in the comment section below.