Status-Between-Pro-Manual-5

Status Between Pro Manual | Step-by-step Guide 2022

Aliexpress banner

The Status Between Pro have Bluetooth 5.2, a hybrid triple driver, an amazing total battery life of 12 hours + 36 hours using the charging case, the IPX5 waterproof certification, and much more. Learn how to use them with this new Status Between Pro Manual.

Status Between Pro Manual | Everything You Need To Know!

Status Between Pro Manual | How to Pair / Connect?

To iOS and Android phones

Step 1: Open the lid of the charging case and take the earbuds out. After that, the earbuds will turn on automatically.

Step 2: Go to the device’s Bluetooth settings.

Step 3: Select “Status Between Pro”. If a password is needed, type “0000”.

Step 4: After that, the pairing will be done.

To PC (Windows)

Step 1: Turn on Window’s Bluetooth.

Step 2: Go to the settings.

Step 3: Go to “Bluetooth and other devices”.

Step 4: Click on “Add device”.

Step 5: Click on Bluetooth.

Step 6: Open the lid of the charging case and take the earbuds out. After that, the earbuds will turn on automatically.

Step 7: Select “Status Between Pro”. If a password is needed, type “0000”.

Step 8: After that, the pairing will be done.

Status-Between-Pro-Manual-1
Credits: Yalla Promos!

Status Between Pro Manual | How to Wear?

Step 1: Take both earbuds out of the charging case.

Step 2: Identify the left and right earbuds.

Step 3: Choose the ear tips that best suit your ears.

Step 4: Insert the headphones into the inner canal of the ears.

Step 5: Rotate for the best possible comfort and best fit, and make sure that the microphone is pointing to the mouth.

Status Between Pro Manual | How to Turn On and Off?

Turn on: Open the lid of the charging case and take the earbuds out. After that, the earbuds will turn on automatically.

Turn off: Place the earbuds into the charging case. After that, the earbuds will turn off automatically.

Status-Between-Pro-Manual-2
Credits: Yalla Promos!

How to Control? / How to Operate? – Instructions

  • Play or pause music: Press the multifunction touch button on any of the earbuds one time.
  • Turn the volume up: Press the multifunction touch button on the right earbud two times.
  • Turn the volume down: Press the multifunction touch button on the left earbud two times.
  • Play the next song: Press and hold the multifunction touch button on the right earbud for 2 seconds.
  • Play the previous song: Press and hold the multifunction touch button on the left earbud for 2 seconds.
  • Answer an incoming call: Press the multifunction touch button on any of the earbuds one time.
  • End a current call: Press the multifunction touch button on any of the earbuds one time.
  • Activate the voice assistant: Press the multifunction touch button on any of the earbuds three times.
Status-Between-Pro-Manual-3
Credits: Yalla Promos!

Status Between Pro Manual | How to Activate Mono Mode?

To activate or deactivate the mono mode in the Status Between Pro, all you have to do is to pair the earbuds to the device and take out one of the earbuds from the charging case. It will start working by itself.

Status Between Pro Manual | How to Charge?

Earbuds

To charge the earbuds, all you have to do is to place them into the charging case and close the lid. The earbuds will start charging automatically.

Charging case

To charge the charging case, all you have to do is to connect the case to a USB charger or charging port with the included USB-A to C cable. It will start charging automatically.

Status-Between-Pro-Manual-4
Credits: Yalla Promos!

Some Common Earbuds Problems & Troubleshooting

Left / Right / One side of the earbuds has stopped working

If this happens, it may be because it is low on battery or it did not connect correctly with the device. To fix this, you can do the following:

1. Try charging the earbud that is not working or both, placing them in the charging case.

2. Try factory resetting the earbuds.

3. Check if the earbuds are operating within a normal working range

If that doesn’t work, the earbud is probably faulty, and I can go for a refund or replacement of it.

Left / Right / One side of the earbuds has a low volume

If this happens, it may be because the earbuds are dirty or the volume is set low. To fix this, you can do the following:

1. Try cleaning the earbud using a cotton swab or carefully clean the mesh with a pin.

2. Try factory resetting the earbuds.

Microphone not working

If this happens, it can be because the microphone is muted, or the earbuds are badly positioned. To fix this, you can do the following:

If the microphone is muted, check the device microphone volume. If that doesn’t work, that means that there might be a defect in the earbud, so try replacing them or get a refund.

Status Between Pro earbuds not connecting to Windows/laptop/PC

If the earbuds are earbuds not connecting, it can be because the Bluetooth on the computer has a pairing problem. To fix this, you can do the following:

1. Try disabling Bluetooth from nearby devices >>> then activate pairing mode of the earbuds, pair and connect earbuds from Settings >>> Bluetooth & other devices >>> Add a new device >>>> elect Bluetooth,

2. Try uninstalling and reinstalling the Bluetooth driver, or update the Bluetooth driver. All can be done in Manage >>> Device Manager, reset earbuds (if available), and then repeat the step.

3. Try resetting the earbuds.

Status-Between-Pro-Manual-5
Credits: Yalla Promos!

FAQs

Are Status Between Pro waterproof?

The Status Between Pro have the IPX5 certification, which means they’re dustproof and protected against water projected from a nozzle.

Does Status Between Pro have a microphone?

Yes, the Status Between Pro have integrated microphones.

Does Status Between Pro have low latency/gaming mode?

No, the Status Between Pro don’t have low latency/gaming mode.

How to know when Status Between Pro are fully charged?

The earbuds take about 1.5 hours to charge, so after that time, they should be fully charged.

Can Status Between Pro connect to PC and Laptop?

Yes, the Status Between Pro can connect to PCs, laptops, and tablets.

We hope you now know how to operate the earphone from the above Status Between Pro Manual. Want to know anything about the earphones? Do not hesitate to ask in the comments section.

  1. Frank, you are a LEGEND! I’d got this very problem. I read your guidance, fully expecting that it wouldn’t work but low & behold it has, it did!!! Thanks Frank!!!

  2. I just got the earbuds and the light on the case isn’t turning on to show that it’s charging. I also have to manually turn off the earbuds every time I put them back in

  3. I’m trying to pair my earbuds with a Motorola handheld radio with built-in BT. However, there is no display option to select the earbuds. Both devices continue to blink “searching” but never fine each other. Looking for suggestions.
    Thanks.

  4. “My ear buds became two separate devices to connect to on my phone idk if this is a bug or some sort of update or issue but I have to connect them separately like as if they were their own instead of them being sync” This happen to me, I was frustrated, till I made some deep google search. I tried this and it worked liked charm

    SOLUTION
    1.unpair & delete( not disconnect) the Bluetooth pairing of between pro on your phone/device
    2. Hold the 2 buttons on both earpiece at the same time for for few seconds
    3. Insert both earpiece in the casing, KEEP THE LID OPEN, DO NOT CLOSE. Immediately hold down the button on the bottom of the casing for about 3-4 seconds( both lights would flash few times in synchrony). I actually repeated this last part of the last step.
    4. Re-pair the earpieces to your phone/device. Hope this would help you as it did for me.
    Please, leave a comment if it works for you

    1. Thank you, Frank! I had the same problem and was getting frustrated that they became two separate devices but following your instructions got them back to paired as one. Thanks again!

      1. Worked for me too! Deleted Between Pro from the Bluetooth menu, held the buttons & put in with the lid open, pushed the bottom button until the purple lights flashed on the ear buds, selected Between Pro from the Bluetooth menu and was back in stereo. Thanks!

    2. Same thing happened to me and I was at wits end. Followed your remedy and it worked.
      Thanks so much for posting ❗️

    3. And another success! Thanks Frank (and Tim as it happens) …

      It took a few goes of running the process (maybe I can’t take simple instructions easily :P) but we got there!

      I think the first couple of times I tried, I took the earpieces out of the case before trying to re-pair (after getting the twin purple flashes) which seemed not to work for me (?)

    4. Thank you, thank you!! Followed your instructions and it works. I was about to send them back, same thing on my iPhone 13 Pro Max… wanted to pair both ear buds separately and I couldn’t get them to work. Glad I found this.

  5. Mine have worked as advertised out of the box – no problems. I have more issues with my Bose 700 which is almost 3 times the cost, plus these sound better than the Bose.

  6. HORRIBLE WORST THING I EVER PURCHASED TOTAL WASTE OF MONEY I can’t have both of them working at the same time, I cant make them work with my iPhone 13 pro max, so apparently, I should change my iPhone?????? don’t waste ur money this is pure garbage

  7. My ear buds became two separate devices to connect to on my phone idk if this is a bug or some sort of update or issue but I have to connect them separately like as if they were their own instead of them being sync.

  8. Mine do NOT come on automatically when they are taken out, do not connect automatically. They will connect separately, and then only one or the other works. Both work, but not simultaneously. Help please!

  9. one of my earpieces doesn’t turn on and keeps flashing purple? I have tried the factory reset but didn’t work. How do I fix this?

    1. Hi,

      There’s a small “button” on the bottom of the charging case. Press it for a min. of 3 seconds with the earbuds in the case and the lid of the case being open.

      Good luck!

    2. I’ve had several of these and the same thing happens every time. One of the earbuds stops recharging in its case, so I only have one working. Absolute shite. And the sellers don’t respond to any of my emails. Pretty sure it’s a scam

  10. I have two pairs of between pro, I have lost one bud of one pair and broken one bud of the other pair. Can I a pair the remaining buds together ? If so how will a factory reset in the case do it ?? Thanks Robi

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.