SuperX ZT000035 TWS Manual | Step-by-step, In-depth Guide 2022

The SuperX ZT000035 TWS comes with a battery life of about 4 hours + 14 hours using the charging case, Bluetooth 5.1 with the AVRCP, A2DP, HPF, and HSP profiles, a working range of 10 meters, the IPX5 certification, and more. Learn how to use them with this new SuperX ZT000035 TWS Manual.

SuperX ZT000035 TWS Manual | All You Need To Know!

SuperX ZT000035 TWS Manual | How to Pair / Connect?

To iOS and Android phones

Step 1: Open the lid of the charging case After that, a “Power on” voice prompt will sound, and the earbuds will turn on automatically. Also, you can press and hold the multifunction touch button on both earbuds for about 3 to 4 seconds.

When a “Pairing” voice prompt sounds on the earbuds, that means that they will be ready to pair with any device.

Step 2: Turn on Bluetooth on the desired device.

Step 3: Go to the device’s Bluetooth settings.

Step 4: Select “SuperX”. If a password is needed, type “0000”.

Step 5: After that, the pairing will be done.

To PC (Windows)

Step 1: Turn on Bluetooth on the desired device.

Step 2: Go to the settings.

Step 3: Go to “Bluetooth and other devices”.

Step 4: Click on “Add device”.

Step 5: Open the lid of the charging case After that, a “Power on” voice prompt will sound, and the earbuds will turn on automatically. Also, you can press and hold the multifunction touch button on both earbuds for about 3 to 4 seconds.

When a “Pairing” voice prompt sounds on the earbuds, that means that they will be ready to pair with any device.

Step 6: Select “SuperX”. If a password is needed, type “0000”.

Step 7: After that, the pairing will be done.

SuperX ZT000035 TWS Manual | How to Wear?

Step 1: Take both earbuds out of the charging case.

Step 2: Identify the left and right earbuds.

Step 3: Choose the ear tips that best suit your ears.

Step 4: Insert the headphones into the inner canal of the ears.

Step 5: Rotate for the best possible comfort and best fit, and make sure that the microphone is pointing to the mouth.

SuperX ZT000035 TWS Manual | How to Turn On and Off?

Turn on: Open the lid of the charging case After that, a “Power on” voice prompt will sound, and the earbuds will turn on automatically. Also, you can press and hold the multifunction touch button on both earbuds for about 3 to 4 seconds.

Turn off: Place the earbuds into the charging case and close its lid. After that, a “Power off” voice prompt will sound, and the earbuds will turn off automatically. Also, you can press and hold the multifunction touch button on both earbuds for about 4 to 5 seconds.

How to Control? / How to Operate? – Instructions

• Play or pause music: Press the multifunction touch button on any of the earbuds one time.
• Play the next song: Press the multifunction touch button on the right earbud two times.
• Play the previous song: Press the multifunction touch button on the left earbud two times.
• Answer an incoming call: Press the multifunction touch button on any of the earbuds one time.
• End a current call: Press the multifunction touch button on any of the earbuds one time.
• Reject an incoming call: Press and hold the multifunction touch button on any of the earbuds for about 1 second.

SuperX ZT000035 TWS Manual | How to Activate Mono Mode?

To activate or deactivate the mono mode in these earbuds, all you have to do is to pair the earbuds to the device and take out one of the earbuds from the charging case. It will start working by itself.

SuperX ZT000035 TWS Manual | How to Charge?

Earbuds

To charge the earbuds, all you have to do is to place them into the charging case and close the lid. The earbuds will start charging automatically.

Charging case

To charge the charging case, all you have to do is to connect the case to a USB charger or charging port with the included USB-A to C cable. It will start charging automatically. Also, the case can be charged using a wireless charger.

SuperX ZT000035 TWS Manual | How to Reset?

Step 1: Delete all “SuperX” pairing information from the connected device.

Step 2: Place the earbuds into the charging case and keep the lid open.

Step 3: Press and hold the factory reset button on the back of the charging case for about10 seconds, and 4 white lights will flash three times on the charging case. When they turn off, the resetting will be done.

SuperX ZT000035 TWS Manual | Voice Prompts

• “Power on”: The earbuds turn on.
• “Power off”: The earbuds turn off.
• “Pairing”: The earbuds are ready to pair with any device.
• “Please charge”: The earbuds have a really low battery and need to be charged.

SuperX ZT000035 TWS Manual | LED Light Status

Earbuds

• A blue light flashing: The earbuds are ready to pair with any device.
• A red light flashing: The earbuds have 20% of battery or less.
• A yellow light flashing: The earbuds have between 20% and 80% of battery.
• A green light flashing: The earbuds have an 80% of battery or more.
• A red light on while on the charging case: The earbuds are charging.
• A green light on while on the charging case: The earbuds are fully charged.
• A red light flashing: There was a charging error.

Charging case

• A red light on: The case has 20% of battery or less.
• A yellow light on: The case has between 20% and 80% of battery.
• A green light on: The case has 80% of battery or more.
• A red light on while charging: The case is charging.
• A green light on while charging: The case is fully charged.
• A red light flashing: The earbuds are resetting.

Some Common Earbuds Problems & Troubleshooting

Left / Right / One side of the earbuds have stopped working

If this happens, it may be because it is low on battery or it did not connect correctly with the device. To fix this, you can do the following:

1. Try charging the earbud that is not working or both, placing them in the charging case.

2. Try factory resetting the earbuds.

3. Check if the earbuds are operating within a normal working range

If that doesn’t work, the earbud is probably faulty, and I can go for a refund or replacement of it.

Left / Right / One side of the earbuds has a low volume

If this happens, it may be because the earbuds are dirty or the volume is set low. To fix this, you can do the following:

1. Try cleaning the earbud using a cotton swab or carefully clean the mesh with a pin.

2. Try factory resetting the earbuds.

The microphone is not working

If this happens, it can be because the microphone is muted, or the earbuds are badly positioned. To fix this, you can do the following:

If the microphone is muted, check the device microphone volume. If that doesn’t work, that means that there might be a defect in the earbud, so try replacing them or get a refund.

The earbuds are not connecting to Windows/laptop/PC

If the earbuds are earbuds not connecting, it can be because the Bluetooth on the computer has a pairing problem. To fix this, you can do the following:

1. Try disabling Bluetooth from nearby devices >>> then activate pairing mode of the earbuds, pair and connect earbuds from Settings >>> Bluetooth & other devices >>> Add a new device >>>> elect Bluetooth,

2. Try uninstalling and reinstalling the Bluetooth driver, or updating the Bluetooth driver. All can be done in Manage >>> Device Manager, reset earbuds (if available), and then repeat the step.

3. Try resetting the earbuds.

FAQs

We hope you now know how to operate the earphone from the above SuperX ZT000035 TWS Manual. Want to know anything about the earphones? Do not hesitate to ask in the comments section.