taotronics-soundliberty-79-manual-d

Taotronics Soundliberty 79 Manual | Step-by-Step Guide 2021

On this page we have already spoken several times about a large number of wired headphones and wireless headphones, thus showing all the incredible features that they bring inside. This time we are going to talk about the user manual that comes with one of these, and it is the instruction manual that comes with the Taotronics Soundliberty 79, and in this new article, we are going to show you everything that comes in this one, as well as the correct way to use them in this Taotronics Soundliberty 79 Manual.

Taotronics Soundliberty 79 Manual | All you need to know about!

Taotronics Soundliberty 79 Manual – How To Pair / Pairing Mode

Pairing both earbuds

Step 1: Open the charging case to turn on the headphones, and they will connect to each other automatically. The LEDs on both earbuds will blink blue and white alternately to indicate that the earbuds are now in pairing mode.

Step 2: Turn on the Bluetooth function on your device and search for nearby devices. Search for “TAOTRONICS Soundliberty 79” in the search results, and tap the name to connect.

Step 3: Once connected, the LEDs on both earbuds will blink blue slowly.

Pairing only one earbud

Single Earbud Mode is available only when the earbuds have been paired with your device in Couple Earbuds Mode.

Step 1: Take one earbud out of the charging case and make sure the other is placed in the charging case and the lid is closed.

Step 2: It will first try to pair with the last paired device and then enter pairing mode with its LED indicator flashing blue and white alternately if pairing fails.

Step 3: Turn on the Bluetooth function on your device and search for nearby devices. Search for “TAOTRONICS Soundliberty 79” in the search results, tap the name to connect.

Step 4: Once connected, the LED indicator will blink blue slowly.

Taotronics Soundliberty 79 Manual – Touch controls / How to use

  • Play or pause music: Tap the multifunction touch control on either of the earbuds twice when music is playing.
  • Volume +: Tap once the multifunction touch control on the right earbud.
  • Volume -: Tap once the multifunction touch control on the left earbud.
  • Play next track: Tap the multifunction touch control on the right earbud three times.
  • Play previous track: Tap the multifunction touch control on the left earbud three times.
  • Answer a phone call: Tap the multifunction touch control on either of the earbuds once.
  • Hang up a phone call: Tap and hold the multifunction touch control on either of the earbuds for two seconds.
  • Decline an incoming phone call: Tap and hold the multifunction touch control on either of the earbuds for two seconds.
  • Turn on / off voice control: Tap and hold the multifunction touch control on either of the earbuds for two seconds or until a beep is heard.

Taotronics Soundliberty 79 Manual - Touch controls / How to use

Taotronics Soundliberty 79 Manual – Reset Instructions

Step 1: Take out one of the earbuds, close the lid, then press and hold the multifunction touch control of the earbud for 10 seconds until the LED indicator flashes white three times.

Step 2: Uncover the lid, take out the other earbud, then press and hold its multifunction touch control for 10 seconds until the LED indicator flashes white three times.

Step 3: Put both earbuds back into the charging case, close the lid, then uncover it after 5 seconds to re-pair with your Bluetooth device as instructed in the “Pairing” section.

Step 4: If you have paired your device with the earbuds before, remove “TAOTRONICS SoundLiberty 79” from the Bluetooth device list and pair again.

Taotronics Soundliberty 79 Manual – How to disable touch?

So far, the touch control cannot be disabled or customized.

Taotronics Soundliberty 79 Manual – What does the battery indicator indicates?

  • Charging the buds / charging case: the LED lights on the charging case turn on progressively.
  • Charging complete: all the LED lights on the charging case turn on.

Taotronics Soundliberty 79 Manual – How to improve audio delay?

Sometimes the most effective solution is the most obvious one. Reset the earbuds, and then try to reconnect them again to the desired device after a few seconds. With luck, it would reset the audio delay and bad connection and improve audio sync.

How to improve audio delay?

Taotronics Soundliberty 79 Manual – How to charge?

Charging the earbuds

Step 1: Place the headphones in the charging case according to the L (left) and R (right) markings.

Step 2: Close the charging case’s lid and the charging will start automatically.

Charging the charging case

Step 1: Connect the charging port on the charging case with any USB charging adapter or active USB port on your computer, and the process will automatically begin.

Step 2: The four charging indicators will light up progressively.

Taotronics Soundliberty 79 Manual – App preview

So far, the Taotronics Soundliberty 79 does not have a specialized app.

Taotronics Soundliberty 79 Manual - App preview

Taotronics Soundliberty 79 troubleshooting / Issues

Taotronics Soundliberty 79 keeps disconnecting

In case the earbuds keep disconnecting, you can do the following:

  • Keep the earbuds and your Bluetooth device within 10 meters / 33 feet.
  • The effective distance may shorten with obstacles in the way.
  • Turn off other Bluetooth devices to decrease the interference.

If none of those options solve the problem, reset the earbuds.

Taotronics Soundliberty 79 left earbud not working

In case one earbud is not working, do the following:

Place both earbuds back into the charging case and then take them out, so they will pair with each other automatically. If pairing fails, restore them back to the factory settings as instructed in the Reset Instructions section. In case that is not the solution, make sure that the earbuds have enough battery.

Taotronics Soundliberty 79 low volume

In case the earbuds have low volume, you can do the following:

  • Wear the earbuds properly and keep them close to each other.
  • Place the connected device close to the earbuds or remove the obstacles between them.
  • Clear the debris on the earbuds.
  • Make sure the volume is adequate.

Troubleshooting / Issues

FAQ

What's the battery life / timing of Taotronics Soundliberty 79?

Their battery life lasts for about 8 hours.

How long should I charge my Taotronics Soundliberty 79?

It takes two hours to fully charge them.

How to increase or decrease volume on Taotronics Soundliberty 79?

Volume +: Tap once the multifunction touch control on the right earbud. Volume -: Tap once the multifunction touch control on the left earbud.

Taotronics Soundliberty 79 Warnings

  1. Never dismantle or refit the product to avoid malfunction or fire hazards.
  2. Keep away from corrosive liquids to avoid damages to the product.
  3. Keep away from extreme ambient temperatures below -10C° or above 60°C.
  4. Keep away from children and pets.
  5. Never touch the earbuds with sharp objects, otherwise, it will easily cause scratches.
  6. Don’t use the product in thunderstorm weather to avoid malfunction or electric shock.
  7. If it has not been used for more than a month, please charge and maintain it in time to ensure that it is safe.

We hope you now know how to operate the earphone from the above Taotronics Soundliberty 79 Manual. Want to know anything about the earphones? Do not hesitate to ask in the comments section.

Show Comments (14)
  1. my right earbud will not pair with the left earbud or pair in mono mode. It charges but when i take it out of the case the voice says “power on” but it doesnt say “pairing” like the left one. I have tried resetting it 100 times and cant seem to find a fix. pls help. (left earbud works perfectly btw)

  2. my right earbud is not pairing with the left earbud.. I tried every possible fix i can find on the net such as hard reset or clean the metal contacts on the right earbud and case but nothing seems to work.. the left earbud works perfectly though.. anyone have the same case as mine? and how did you fix it?

      1. Its charging, actually when I tap it 5 consecutive times it will start to blink ..but it’s not pairing with the left earpod

          1. It looks like it’s already paired then. Try checking if any nearby device is connected to it. Also, try resetting the earbuds.

          2. Well i hope so but its not, and also i already removed the buds connection to other devices, hard reset the buds still the right earbuds is not turning on automatically when I open the case, I need to long press the buds 5secs just to turn it on but only ending up not pairing with the left bud

          3. I think it’s a defect in the earbuds then. Have you considered contacting Taotronics support?

          4. Yah and they give me a full refund and I they let me keep the unit :)) thats why Im finding a way to fix it

  3. My left EarPod won’t hold a charge. Even after charging. Turns off a few seconds after I put it on.

    1. There might be a charging issue with that earbud. TWS earbuds mostly have these issues where either the right and left earbuds stopped working after some time. It’s a factory defect in a few models. The only options are to replace them or to return them if they are on warranty.

      I had two QCY T5 with me. One of them had the left earbud working. It wasn’t charging as I checked the other left earbud from the other one, it was charging and so it was clear that the earbud had the defect, not the charging cable.

      Most of the fake AirPods I tested also had these issues. It seems to be an issue in TWS earbuds. One of them stops working after some time (2 to 4 months).

  4. I dropped my left earbud in the water and it was submerged for 24 hours. It dried out and was working again. Then I charged it overnight and now it does not work and now when I put the earbud in, all four lights on the the charging case blink three times in rapid fashion. The blue light on the earbud does not light up. I tried resetting. Any suggestions?

    1. It could be possible that your earbud might have short-circuited, as you said it doesn’t indicate the LED status anymore. I know you already dried it off and it was working. But maybe there was slight moisture left which caused a short circuit. As a result that earbud could not be charging anymore.

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.