TaoTronics SoundLiberty 80 Manual | Step-by-step Guide 2022

The TaoTronics SoundLiberty 80 comes with the amazing IPX7 certification, Hi-Fi sound, 12mm dynamic drivers, Bluetooth 5.0, a Qualcomm aptX chip, a battery life of about 4 hours + 16 using the charging case, a smart noise-reducing microphone, and more. Learn how to use them with this new TaoTronics SoundLiberty 80 Manual.

TaoTronics SoundLiberty 80 Manual | This Is All You Need To Know!

TaoTronics SoundLiberty 80 Manual | How to Pair / Connect?

To iOS and Android phones

Step 1: Open the lid of the charging case and take the earbuds out. After that, the earbuds will turn on automatically.

Step 2: Turn on the Bluetooth on the desired device.

Step 3: Go to the device’s Bluetooth settings.

Step 4: Select “TaoTronics SoundLiberty 80”. If a password is needed, type “0000”.

Step 5: After that, the pairing will be done.

To PC (Windows)

Step 1: Turn on Window’s Bluetooth.

Step 2: Go to the settings.

Step 3: Go to “Bluetooth and other devices”.

Step 4: Click on “Add device”.

Step 5: Click on Bluetooth.

Step 6: Open the lid of the charging case and take the earbuds out. After that, the earbuds will turn on automatically.

Step 7: Select “TaoTronics SoundLiberty 80”. If a password is needed, type “0000”.

Step 8: After that, the pairing will be done.

TaoTronics SoundLiberty 80 Manual | How to Wear?

Step 1: Take both earbuds out of the charging case.

Step 2: Identify the left and right earbuds.

Step 3: Choose the ear tips that best suit your ears.

Step 4: Insert the headphones into the inner canal of the ears.

Step 5: Rotate for the best possible comfort and best fit, and make sure that the microphone is pointing to the mouth.

TaoTronics SoundLiberty 80 Manual | How to Turn On And Off?

Turn on: Open the lid of the charging case and take the earbuds out. After that, the earbuds will turn on automatically.

Turn off: Place the earbuds into the charging case and close its lid. After that, the earbuds will turn off automatically.

How to Control? / How to Operate? – Instructions

• Play or pause music: Press the multifunction touch button on any of the earbuds two times.
• Play the next song: Slide down the multifunction touch button on the left earbud.
• Play the previous song: Slide up the multifunction touch button on the left earbud.
• Turn the volume up: Slide up the multifunction touch button on the right earbud.
• Turn the volume down: Slide down the multifunction touch button on the left earbud.
• Answer an incoming call: Press the multifunction touch button on any of the earbuds two times.
• End a current call: Press the multifunction touch button on any of the earbuds two times.

TaoTronics SoundLiberty 80 Manual | How to Activate Mono Mode?

To activate or deactivate the mono mode in the TaoTronics SoundLiberty 80, all you have to do is to pair the earbuds to the device and take out one of the earbuds from the charging case. It will start working by itself.

TaoTronics SoundLiberty 80 Manual | How to Charge

Earbuds

To charge the earbuds, all you have to do is to place them into the charging case and close the lid. The earbuds will start charging automatically.

Charging case

To charge the charging case, all you have to do is to connect the case to a USB charger or charging port with the included USB-A to C cable.

Some Common Earbuds Problems & Troubleshooting

Left / Right / One side of the earbuds have stopped working

If this happens, it may be because it is low on battery or it did not connect correctly with the device. To fix this, you can do the following:

1. Try charging the earbud that is not working or both, placing them in the charging case.

2. Try factory resetting the earbuds.

3. Check if the earbuds are operating within a normal working range.

If that doesn’t work, the earbud is probably faulty, and I can go for a refund or replacement of it.

Left / Right / One side of the earbuds has low volume

If this happens, it may be because the earbuds are dirty or the volume is set low. To fix this, you can do the following:

1. Try cleaning the earbud using a cotton swab or carefully clean the mesh with a pin.

2. Try factory resetting the earbuds.

Microphone not working

If this happens, it can be because the microphone is muted, or the earbuds are badly positioned. To fix this, you can do the following:

If the microphone is muted, check the device microphone volume. If that doesn’t work, that means that there might be a defect in the earbud, so try replacing them or get a refund.

The earbuds are not connecting to Windows/laptop/PC

If the earbuds are earbuds not connecting, it can be because the Bluetooth on the computer has a pairing problem. To fix this, you can do the following:

1. Try disabling Bluetooth from nearby devices >>> then activate pairing mode of the earbuds, pair and connect earbuds from Settings >>> Bluetooth & other devices >>> Add a new device >>>> elect Bluetooth,

2. Try uninstalling and reinstalling the Bluetooth driver, or update the Bluetooth driver. All can be done in Manage >>> Device Manager, reset earbuds (if available), and then repeat the step.

3. Try resetting the earbuds.

FAQs

We hope you now know how to operate the earphone from the above TaoTronics SoundLiberty 80 Manual. Want to know anything about the earphones? Do not hesitate to ask in the comments section.