Taotronics Soundliberty 92 Manual | Step-by-Step Guide 2021

 In the world of technology, there are a large number of products, which can be used to improve our lives at home or for personal and recreational use. Among the many products that are currently available, we have the earbuds, and here we have talked about some of them, just like the Raycon E25. In this article, we are going to show you the user manual of one of these products, the Taotronics Soundliberty 92, as well as the correct way to use them in this new Taotronics Soundliberty 92 Manual.

Taotronics Soundliberty 92 Manual | All you need to know about!

Taotronics Soundliberty 92 Manual – How To Pair / Pairing Mode

Pairing both earbuds

Step 1: Open the charging case to turn on the headphones, and they will connect to each other automatically. The LEDs on both earbuds will blink blue and white alternately to indicate that the earbuds are now in pairing mode.

Step 2: Turn on the Bluetooth function on your device and search for nearby devices. Search for “TAOTRONICS Soundliberty 92” in the search results, and tap the name to connect.

Step 3: Once connected, the LEDs on both earbuds will blink blue slowly.

Pairing only one earbud

Step 1: Take one earbud out of the charging case and make sure the other is placed in the charging case and the lid is closed.

Step 2: It will first try to pair with the last paired device and then enter pairing mode with its LED indicator flashing blue and white alternately if pairing fails.

Step 3: Turn on the Bluetooth function on your device and search for nearby devices. Search for “TAOTRONICS Soundliberty 92” in the search results, tap the name to connect.

Step 4: Once connected, the LED indicator will blink blue slowly.

Taotronics Soundliberty 92 Manual – Touch controls / How to use

• Play or pause music: Tap the touch control on either of the earbuds twice when music is playing.
• Volume +: Tap once the touch control on the right earbud.
• Volume -: Tap once the touch control on the left earbud.
• Play next track: Tap the touch control on the right earbud three times.
• Play previous track: Tap the touch control on the left earbud three times.
• Answer a phone call: Tap the touch control on either of the earbuds once.
• Hang up a phone call: Tap and hold the touch control on either of the earbuds for two seconds.
• Decline an incoming phone call: Tap and hold the touch control on either of the earbuds for two seconds.
• Turn on / off voice control: Tap and hold the touch control on either of the earbuds for two seconds or until a beep is heard.

Taotronics Soundliberty 92 Manual – Reset Instructions

Step 1: Put the earbuds back in the charging case, close the cover, and then open it.

Step 2: Press and hold the reset button for 10 seconds until the LEDs on the headphones and charging case flash white three times.

Step 3: If you have paired your device with the headphones before, delete “TAOTRONICS Soundliberty 92” from the Bluetooth device list and pair again.

Step 4: Re-pair with your Bluetooth device as instructed in the “How To Pair / Pairing Mode” section.

Taotronics Soundliberty 92 Manual – How to control volume?

• Volume +: Tap once the touch control on the right earbud.
• Volume -: Tap once the touch control on the left earbud.

Similarly, you can control the volume from the phone’s soundbar as well. + to increase and – to decrease.

Taotronics Soundliberty 92 Manual – What does the battery indicator indicates?

• Charging the buds / charging case: the charging case LED turns on.
• Charging complete: the LED blinks and turns solid white.

Taotronics Soundliberty 92 Manual – How to charge?

Charging the earbuds

Step 1: Place the headphones in the charging case according to the L (left) and R (right) markings.

Step 2: Close the charging case’s lid and the charging will start automatically.

Charging the charging case

Step 1: Connect the charging port on the charging case with any USB charging adapter or active USB port on your computer, and the process will automatically begin.

Step 2: The charging indicator will blink and turn solid white once fully charged.

Taotronics Soundliberty 92 troubleshooting / Issues

Taotronics Soundliberty 92 one earbud not working

In case one earbud is not working, do the following:

Place both earbuds back into the charging case and then take them out, so they will pair with each other automatically. If pairing fails, restore them back to the factory settings as instructed in the Reset Instructions section. In case that is not the solution, make sure that the earbuds have enough battery.

Still not successful? It looks like the earbud which is not working (no connecting and no charging) is defective. This is common in almost every earbud. Go for a replacement or a return.

Taotronics Soundliberty 92 not charging

In case the earbuds are not charging, consider the following:

• Make sure that the earbuds are correctly in place.
• Make sure the charging case is fully charged.
• Make sure nothing is blocking the charging ports of the earbuds or the charging case.

Still not successful? It appears to be that the earbud is defective. This is common in almost every earbud after a few days of use. Go for a replacement or a return.

Taotronics Soundliberty 92 not working

In case the earbuds are not working, try to reset them. Also, make sure they have enough battery power.

FAQ

Are Taotronics Soundliberty 92 waterproof?

Yes, they have the IPX8 certification.

What's the charge time of Taotronics Soundliberty 92 TWS earbuds?

They fully charge in about 90 minutes.

How do i reset my Taotronics headphones?

Step 1: Put the earbuds back in the charging case, close the cover, and then open it. Step 2: Press and hold the reset button for 10 seconds until the LEDs on the headphones and charging case flash white three times. Step 3: If you have paired your device with the headphones before, delete TAOTRONICS SoundLiberty 92 from the Bluetooth device list and pair again. Step 4: Re-pair with your Bluetooth device as instructed in the How To Pair / Pairing Mode section.

How to turn on Taotronics earbuds?

You just have to take them out of the charging case an they will automatically turn on.

Taotronics Soundliberty 92 – Warnings

1. Never dismantle or refit the product to avoid malfunction or fire hazards.
2. Keep away from corrosive liquids to avoid damages to the product.
3. Keep away from extreme ambient temperatures below -10C° or above 60°C.
4. Keep away from children and pets.
5. Never touch the earbuds with sharp objects, otherwise, it will easily cause scratches.
6. Don’t use the product in thunderstorm weather to avoid malfunction or electric shock.
7. If it has not been used for more than a month, please charge and maintain it in time to ensure that it is safe.

We hope you now know how to operate the earphone from the above Taotronics Soundliberty 92 Manual. Want to know anything about the earphones? Do not hesitate to ask in the comments section.