TaoTronics-SoundLiberty-97-Manual-7

TaoTronics SoundLiberty 97 | Pairing Instructions

The TaoTronics SoundLiberty 97 come with specs such as about 9 hours of battery life + 20 hours using the charging case, CVC 8.0 active noise cancellation technology, 6mm PEEK+PU drivers and integrated microphones in each earbud, Bluetooth 5.0, the incredible IPX8 waterproof certification, and much more. Learn how to use these earbuds using this manual!

TaoTronics SoundLiberty 97 | Step-by-step Pairing

How to Pair The Earbuds?

To Android And iOS Devices

Step 1: Open the lid of the charging case and take the earbuds out. After that, the earbuds will turn on automatically.

When the “Pairing” voice prompt is heard on the earbuds, and a blue and white light starts flashing, it means that they are now connected to each other.

Step 2: Unlock the desired device.

Step 3: Turn on Bluetooth on the desired device.

Step 4: Go to the device’s Bluetooth settings.

Step 5: Select the “TAOTRONICS SoundLiberty 97” earbuds. If a password is needed, type “0000”. After that, the “Connected” prompt tone will sound, a blue light will start flashing slowly, and the pairing will be done.

To PC (Windows)

Step 1: Unlock the desired device.

Step 2: Turn on Bluetooth on the device.

Step 3: Go to the Settings.

Step 4: Go to “Bluetooth and other devices”.

Step 5: Click on “Add device”.

Step 6: Open the lid of the charging case and take the earbuds out. After that, the earbuds will turn on automatically.

When the “Pairing” voice prompt is heard on the earbuds, and a blue and white light starts flashing, it means that they are now connected to each other.

Step 7: Select the “TAOTRONICS SoundLiberty 97” earbuds. If a password is needed, type “0000”. After that, the “Connected” prompt tone will sound, a blue light will start flashing slowly, and the pairing will be done.

TaoTronics-SoundLiberty-97-Manual-1

How to Manually Pair The Earbuds?

If the earbuds don’t enter pairing mode automatically, or they are out of the case, then do the following steps:

Step 1: Place both earbuds into the charging case and keep the lid open.

Step 2: Press and hold the reset button on the back of the charging case for about 3 seconds to disconnect the currently paired device.

When the “Pairing” voice prompt is heard on the earbuds, and a blue and white light starts flashing, it means that they are now connected to each other.

Step 3: Unlock the desired device.

Step 4: Turn on Bluetooth on the desired device.

Step 5: Go to the device’s Bluetooth settings.

Step 6: Select the “TAOTRONICS SoundLiberty 97” earbuds. If a password is needed, type “0000”. After that, the “Connected” prompt tone will sound, a blue light will start flashing slowly, and the pairing will be done.

TaoTronics-SoundLiberty-97-Manual-2

How to Wear?

Step 1: Take both earbuds out of the charging case.

Step 2: Identify the left and right earbuds.

Step 3: Choose the ear tips that best suit your ears.

Step 4: Insert the headphones into the inner canal of the ears.

Step 5: Rotate for the best possible comfort and best fit, and make sure that the microphone is pointing to the mouth.

How to Turn On and Off?

Turn on: Open the lid of the charging case. After that, the earbuds will turn on automatically.

Turn off: Place the earbuds into the charging case and close its lid. After that, the earbuds will turn off automatically.

How to Control? / How to Operate? – Instructions

  • Play or pause music: Press the multifunction touch button on any of the earbuds two times.
  • Turn the volume up: Press the multifunction touch button on the right earbud one time.
  • Turn the volume down: Press the multifunction touch button on the left earbud one time.
  • Play the next song: Press the multifunction touch button on the right earbud three times.
  • Play the previous song: Press the multifunction touch button on the left earbud three times.
  • Answer an incoming call: Press the multifunction touch button on any of the earbuds one time.
  • End a current call: Press and hold the multifunction touch button on any of the earbuds for about 2 seconds.
  • Reject an incoming call: Press and hold the multifunction touch button on any of the earbuds for about 2 seconds.
  • Turn on/off the voice control: Press and hold the multifunction touch button on any of the earbuds for about 2 seconds.

How to Activate The Mono Mode?

To activate or deactivate the mono mode in these earbuds, all you have to do is to pair the earbuds to the device and take out one of the earbuds from the charging case. It will start working by itself.

How to Charge The Earbuds?

Earbuds

To charge the earbuds, all you have to do is to place them into the charging case and close the lid. The earbuds will start charging automatically.

Charging case

To charge the charging case, all you have to do is to connect the case to a USB charger or charging port with the included USB-A to C cable. It will start charging automatically.

TaoTronics-SoundLiberty-97-Manual-5

The Earbuds’ Voice Prompts

  • Pairing: The earbuds are now in pairing mode.
  • Connected: The earbuds are now connected to the desired device.
  • Disconnected: The earbuds have disconnected from the device.
  • Call rejected: An incoming call has been rejected.
  • Toot: The voice control feature has been turned on or off.
  • Battery low: The earbuds have a low battery level.

How to Clear The Earbuds’ Pairing List?

If the earbuds failed to pair with the device, clear the pairing history by doing the following steps:

Step 1: Place both earbuds into the charging case and keep the lid open.

Step 2: Press and hold the reset button on the back of the charging case for about 8 seconds, until a blue and white light starts flashing.

Step 3: Delete all pairing records of the “TAOTRONICS SoundLiberty 97” earbuds from the connected device.

After that, the process will be done.

TaoTronics-SoundLiberty-97-Manual-6

What Do The Lights Mean?

Earbuds

  • A blue and white light flashing: The earbuds are now in pairing mode.
  • A blue light flashing slowly: The earbuds are now connected to the device.

Charging case

  • A white light on while charging: The case is charging.
  • Said light turns off while charging: The case is charging.

Some Common Problems & Troubleshooting

Left / Right / One side of the earbuds has stopped working

If this happens, it may be because it is low on battery or it did not connect correctly with the device. To fix this, you can do the following:

1. Try charging the earbud that is not working or both, placing them in the charging case.

2. Try factory resetting the earbuds.

3. Check if the earbuds are operating within a normal working range

If that doesn’t work, the earbud is probably faulty, and I can go for a refund or replacement of it.

Left / Right / One side of the earbuds has a low volume

If this happens, it may be because the earbuds are dirty or the volume is set low. To fix this, you can do the following:

1. Try cleaning the earbud using a cotton swab or carefully clean the mesh with a pin.

2. Try factory resetting the earbuds.

The microphone is not working

If this happens, it can be because the microphone is muted, or the earbuds are badly positioned. To fix this, you can do the following:

If the microphone is muted, check the device microphone volume. If that doesn’t work, that means that there might be a defect in the earbud, so try replacing them or get a refund.

The earbuds are not connecting to Windows/laptop/PC

If the earbuds are earbuds not connecting, it can be because the Bluetooth on the computer has a pairing problem. To fix this, you can do the following:

1. Try disabling Bluetooth from nearby devices >>> then activate the pairing mode of the earbuds, pair and connect earbuds from Settings >>> Bluetooth & other devices >>> Add a new device >>>> select Bluetooth.

2. Try uninstalling and reinstalling the Bluetooth driver, or updating the Bluetooth driver. All can be done in Manage >>> Device Manager, reset earbuds (if available), and then repeat the step.

3. Try resetting the earbuds.

TaoTronics-SoundLiberty-97-Manual-7

FAQs

Are the TaoTronics SoundLiberty 97 waterproof?

Yes, the TaoTronics SoundLiberty 97 are waterproof (IPX6 and up). They have a rating of IPX8, this being the highest and meaning that not only are they against water but are also protected against heavy rain and heavy sweat.

Do the TaoTronics SoundLiberty 97 have a microphone?

Yes, the earbuds come with integrated microphones.

Do the TaoTronics SoundLiberty 97 have a low latency/gaming mode?

No. These earbuds don’t have a low latency/gaming mode.

Can the TaoTronics SoundLiberty 97 connect to PCs and laptops?

Yes, these earbuds can connect to PCs and laptops.

Are the TaoTronics SoundLiberty 97 noise-canceling?

No. These earbuds don’t come with noise-cancellation technology.

We hope you now know how to operate the earphone from the above TaoTronics SoundLiberty 97 manual. Want to know anything about the earphones? Do not hesitate to ask in the comments section.