Home Audiophile Earbuds Manuals The TaoTronics SoundLiberty Pro S10 come with specs such as a Qualcomm QCC3020 chip + D4P (AI noise reduction algorithm) set, Bluetooth 5.0 with AAC/SBC/aptX support, a 12mm HiFi dynamic driver in each earbud, a battery life of about 4 hours, the incredible IPX7 waterproof certification, and much more. Learn how to use these earbuds using this manual! What's Inside ToggleTaoTronics SoundLiberty Pro S10 | How to Use?How to Pair The Earbuds?How to Manually Pair The Earbuds?How to Wear?How to Turn On and Off?How to Control? / How to Operate? – InstructionsHow to Activate The Mono Mode?How to Charge The Earbuds?How to Clear The Earbuds’ Pairing List?What Do The Lights Mean?Some Common Problems & TroubleshootingFAQs TaoTronics SoundLiberty Pro S10 | How to Use? How to Pair The Earbuds? To Android And iOS Devices Step 1: Open the lid of the charging case and take the earbuds out. After that, the earbuds will turn on automatically. Step 2: Unlock the desired device. Step 3: Turn on Bluetooth on the desired device. Step 4: Go to the device’s Bluetooth settings. Step 5: Select the “TaoTronics S10” earbuds. If a password is needed, type “0000”. After that, the pairing will be done. To PC (Windows) Step 1: Unlock the desired device. Step 2: Turn on Bluetooth on the device. Step 3: Go to the Settings. Step 4: Go to “Bluetooth and other devices”. Step 5: Click on “Add device”. Step 6: Open the lid of the charging case and take the earbuds out. After that, the earbuds will turn on automatically. Step 7: Select the “TaoTronics S10” earbuds. If a password is needed, type “0000”. After that, the pairing will be done. How to Manually Pair The Earbuds? If the earbuds don’t enter pairing mode automatically, or they are out of the case, then do the following steps: Step 1: Place both earbuds into the charging case and keep the lid open. Step 2: Press and hold the reset button on the charging case for about 3 seconds, until a white light flashes three times. Step 3: Unlock the desired device. Step 4: Turn on Bluetooth on the desired device. Step 5: Go to the device’s Bluetooth settings. Step 6: Select the “TaoTronics S10” earbuds. If a password is needed, type “0000”. After that, the pairing will be done. How to Wear? Step 1: Take both earbuds out of the charging case. Step 2: Identify the left and right earbuds. Step 3: Choose the ear tips that best suit your ears. Step 4: Insert the headphones into the inner canal of the ears. Step 5: Rotate for the best possible comfort and best fit, and make sure that the microphone is pointing to the mouth. How to Turn On and Off? Turn on: Open the lid of the charging case. After that, the earbuds will turn on automatically. Turn off: Place the earbuds into the charging case and close its lid. After that, the earbuds will turn off automatically. How to Control? / How to Operate? – Instructions Play or pause music: Press the multifunction touch button on any of the earbuds two times. Turn the volume up: Swipe up the multifunction touch button on the right earbud. Turn the volume down: Swipe down the multifunction touch button on the right earbud. Play the next song: Swipe up the multifunction touch button on the left earbud. Play the previous song: Swipe down the multifunction touch button on the left earbud. Answer an incoming call: Press the multifunction touch button on any of the earbuds one time. End a current call: Press and hold the multifunction touch button on any of the earbuds for about 2 seconds. Reject an incoming call: Press and hold the multifunction touch button on any of the earbuds for about 2 seconds. Activate the voice assistant: Press and hold the multifunction touch button on any of the earbuds for about 2 seconds. Turn on/off the voice control: Press and hold the multifunction touch button on any of the earbuds for about 5 seconds. How to Activate The Mono Mode? To activate or deactivate the mono mode in these earbuds, all you have to do is to pair the earbuds to the device and take out one of the earbuds from the charging case. It will start working by itself. How to Charge The Earbuds? Earbuds To charge the earbuds, all you have to do is to place them into the charging case and close the lid. The earbuds will start charging automatically. Charging case To charge the charging case, all you have to do is to connect the case to a USB charger or charging port with the included USB-A to C cable. It will start charging automatically. How to Clear The Earbuds’ Pairing List? If the earbuds failed to pair with the device, clear the pairing history by doing the following steps: Step 1: Delete all pairing records of the “TaoTronics S10” earbuds from the connected device. Step 2: Place both earbuds into the charging case and keep the lid open. Step 3: Press and hold the reset button on the charging case for about 10 seconds, until a white light flashes three times. After that, the process will be done. What Do The Lights Mean? Earbuds A white light flashes 3 times: The earbuds are resetting. Charging case A white light flashing slowly while charging: The case is charging. A white light steady on while charging: The case is fully charged. A red light on: The case has a low battery. Some Common Problems & Troubleshooting Left / Right / One side of the earbuds has stopped working If this happens, it may be because it is low on battery or it did not connect correctly with the device. To fix this, you can do the following:See alsoOPPO Enco X Manual | Pairing & TroubleshootingGines·January 4, 2022 1. Try charging the earbud that is not working or both, placing them in the charging case. 2. Try factory resetting the earbuds. 3. Check if the earbuds are operating within a normal working range If that doesn’t work, the earbud is probably faulty, and I can go for a refund or replacement of it. Left / Right / One side of the earbuds has a low volume If this happens, it may be because the earbuds are dirty or the volume is set low. To fix this, you can do the following: 1. Try cleaning the earbud using a cotton swab or carefully clean the mesh with a pin. 2. Try factory resetting the earbuds. The microphone is not working If this happens, it can be because the microphone is muted, or the earbuds are badly positioned. To fix this, you can do the following: If the microphone is muted, check the device microphone volume. If that doesn’t work, that means that there might be a defect in the earbud, so try replacing them or get a refund. The earbuds are not connecting to Windows/laptop/PC If the earbuds are earbuds not connecting, it can be because the Bluetooth on the computer has a pairing problem. To fix this, you can do the following: 1. Try disabling Bluetooth from nearby devices >>> then activate the pairing mode of the earbuds, pair and connect earbuds from Settings >>> Bluetooth & other devices >>> Add a new device >>>> select Bluetooth. 2. Try uninstalling and reinstalling the Bluetooth driver, or updating the Bluetooth driver. All can be done in Manage >>> Device Manager, reset earbuds (if available), and then repeat the step. 3. Try resetting the earbuds. FAQs Are the TaoTronics SoundLiberty Pro S10 waterproof? Yes, the TaoTronics SoundLiberty Pro S10 are waterproof (IPX6 and up). They have a rating of IPX7, meaning that they not only are against water but are also protected against the effects of immersion. Do the TaoTronics SoundLiberty Pro S10 have a microphone? Yes, the earbuds come with integrated microphones. Do the TaoTronics SoundLiberty Pro S10 have a low latency/gaming mode? No. These earbuds don’t have a low latency/gaming mode. Can the TaoTronics SoundLiberty Pro S10 connect to PCs and laptops? Yes, these earbuds can connect to PCs and laptops. Are the TaoTronics SoundLiberty Pro S10 noise-canceling? No. These earbuds don’t come with noise-cancellation technology. We hope you now know how to operate the earphone from the above TaoTronics SoundLiberty Pro S10 manual. Want to know anything about the earphones? Do not hesitate to ask in the comments section.