Technics EAH-AZ80 Manual | Pairing & Charging Instructions

The Technics EAH-AZ80 earbuds come with specs such as Active Noise Canceling and Ambient Sound support, a 10mm driver unit, a battery life of about 7 hours (ANC on) and 7.5 hours (ANC off), Bluetooth 5.3 with A2DP, AVRCP, HSP, HFP supported profiles, the IPX4 dust and sweat-proof certification, and much more. Learn how to use these earbuds using this manual!

Technics EAH-AZ80 Earbuds Manual & Instructions

How to Pair The Earbuds?

To Android or iOS Devices

Step 1: Open the lid of the charging case and take the earbuds out. After that, the earbuds will turn on automatically.

Step 2: Place the earbuds into the ear canal. When a sound appears, they will be ready to pair with any device.

Step 3: Turn on Bluetooth on the desired device.

Step 4: Select the Technics EAH-AZ80. If a password is needed, type “0000”. After that, the pairing will be done.

To A Second Bluetooth Device

Step 1: Open the lid of the charging case and take the earbuds out. After that, the earbuds will turn on automatically.

Step 2: Place the earbuds into the ear canal.

Step 3: Press and hold the multifunction touch button on both earbuds for about 5 to 8 seconds. When a sound appears, they will be ready to pair with any device.

Step 4: Turn on Bluetooth on the desired device.

Step 5: Select the Technics EAH-AZ80. If a password is needed, type “0000”. After that, the pairing will be done.

Establish Multi-point Connections

To use the earbuds on two different devices at the same time, you must activate the multi-point feature following the next steps:

Step 1: Open the Technics Audio Connect app.

Step 2: Go to Settings.

Step 3: Tap “Multi-point”

Step 4: Select the number of devices.

Step 5: Follow the on-screen instructions.

After that, the earbuds will be able to work on two devices, being configured as follows:

Step 1: Confirm that the earbuds are paired with the Bluetooth devices.

Step 2: Connect the first Bluetooth device to the earbuds.

Step 3: From the Bluetooth of the device, select the earbuds.

Step 4: Connect the second Bluetooth device to the earbuds.

Step 5: From the Bluetooth of the device, select the earbuds.

How to Wear These Earbuds?

Step 1: Take both earbuds out of the charging case.

Step 2: Identify the left and right earbuds.

Step 3: Choose the ear tips that best suit your ears.

Step 4: Insert the headphones into the inner canal of the ears.

Step 5: Rotate for the best possible comfort and best fit, and make sure that the microphone is pointing to the mouth.

How to Turn On And Off?

Turn on: Open the lid of the charging case and take the earbuds out. After that, the earbuds will turn on automatically.

Turn off: Place the earbuds into the charging case. After that, a red light will flash twice, and the earbuds will turn off automatically.

How to Control These Earbuds? – Stereo Mode

• Play or pause the music: Press the multifunction touch button on any of the earbuds one time.
• Play the next song: Press the multifunction touch button on the right earbud two times.
• Play the previous song: Press the multifunction touch button on the right earbud three times.
• Turn the volume down: Press the multifunction touch button on the left earbud two times.
• Turn the volume up: Press the multifunction touch button on the left earbud three times.
• Activate the voice assistant: Press the multifunction touch button on the left earbud one time, and then press and hold for 2 seconds.
• Activate the noise canceling feature: Press the multifunction touch button on the right earbud one time, and then press and hold for 2 seconds.
• Answer an incoming call: Press the multifunction touch button on any of the earbuds one time.
• Mute the microphone: Press the multifunction touch button on the right earbud two times.
• Activate the noise reduction feature: Press the multifunction touch button on the right earbud three times.
• Reject an incoming call: Press the multifunction touch button on any of the earbuds one time, and then press and hold for 2 seconds.

How to Activate The Mono Mode?

To activate or deactivate the mono mode in these earbuds, all you have to do is to pair the earbuds to the device and take out one of the earbuds from the charging case. It will start working by itself.

How to Charge The Earbuds?

Earbuds

To charge the earbuds, all you have to do is to place them into the charging case. The earbuds will start charging automatically.

Charging case

To charge the charging case, all you have to do is to connect the case to a USB charger or charging port. It will start charging automatically. Also, it can get charged using a wireless charger.

What Do The Lights Mean?

Earbuds

• A red light flashes twice when placed on the charging case: The earbuds turn off.
• A red light on while on the charging case: The earbuds are charging.
• Said red light turns off while on the charging case: The earbuds are fully charged.

Charging case

• A red light flashes while charging: The case has a low battery.
• A yellow light flashes while charging: The case has a medium battery.
• A green light flashes while charging: The case has a high battery.
• Said green light turns off while charging: The case is fully charged.

How to Reset The Earbuds?

Step 1: Open the Technics Audio Connect app.

Step 2: Go to Settings.

Step 3: Tap “Headphone information”.

Step 4: Tap “Restore headphones to the factory settings”.

Step 5: Tap “Reset”.

Step 6: Follow the on-screen instructions.

A Guide To Technics EAH-AZ80 APP

The Technics EAH-AZ80 earbuds have an application specially made for them, and it is the Technics Audio Connect app, which is available on Play Store and App Store. When entering the application, you have to connect to the earbuds.

• Home page: This is the first page of the app, where the connected earbuds appear, as well as the percentage of their battery. In addition to that, there are various options, such as configuring the noise canceling feature, finding the earbuds in case of loss, and a voice test.
• Ambient page: This is the specific section of Ambient mode, where it can be activated, modified, and deactivated. Likewise, if the earbud has the feature, the ANC can be configured.
• Sound page: Here, you can configure the sound profile that the earbuds will emit. It has a couple of established sound styles, although it can be configured according to what you want or need.
• Settings page: Here are the various options and functions of the earbuds. Not only can you change its name, but you can also add earbuds to the app, and configure some functions.

How to Update The Earbuds’ Firmware?

Step 1: Open the Technics Audio Connect app.

Step 2: Go to Settings.

Step 3: Tap “Update headphones”.

Step 4: Follow the on-screen instructions. Wait until the update is complete and do not operate the headphones or the app.

Step 5: Go to the home screen of the app.

Step 6: Go to Settings.

Step 7: Tap “Headphone information” and confirm that “Firmware is up to date.” is displayed.

Some Common Problems & Troubleshooting

Left / Right / One side of the earbuds has stopped working

If this happens, it may be because it is low on battery or it did not connect correctly with the device. To fix this, you can do the following:

1. Try charging the earbud that is not working or both, placing them in the charging case.

2. Try factory resetting the earbuds.

3. Check if the earbuds are operating within a normal working range

If that doesn’t work, the earbud is probably faulty, and I can go for a refund or replacement of it.

Left / Right / One side of the earbuds has a low volume

If this happens, it may be because the earbuds are dirty or the volume is set low. To fix this, you can do the following:

1. Try cleaning the earbud using a cotton swab or carefully clean the mesh with a pin.

2. Try factory resetting the earbuds.

The microphone is not working

If this happens, it can be because the microphone is muted, or the earbuds are badly positioned. To fix this, you can do the following:

If the microphone is muted, check the device microphone volume. If that doesn’t work, that means that there might be a defect in the earbud, so try replacing them or get a refund.

The earbuds are not connecting to Windows/laptop/PC

If the earbuds are earbuds not connecting, it can be because the Bluetooth on the computer has a pairing problem. To fix this, you can do the following:

1. Try disabling Bluetooth from nearby devices >>> then activate the pairing mode of the earbuds, pair and connect earbuds from Settings >>> Bluetooth & other devices >>> Add a new device >>>> select Bluetooth.

2. Try uninstalling and reinstalling the Bluetooth driver, or updating the Bluetooth driver. All can be done in Manage >>> Device Manager, reset earbuds (if available), and then repeat the step.

3. Try resetting the earbuds.

FAQs

We hope you now know how to operate the earphone from the above Technics EAH-AZ80 manual! Want to know anything about the earphones? Do not hesitate to ask in the comments section.