Tiso I6 Earbuds Manual | Step-by-step, In-depth Guide 2022

The Tiso I6 Earbuds have 7.5mm speakers, AAC Hi-Fi, DSP + CVC double noise cancellation, a total of 31 hours of battery life using the charging case, the amazing IPX6 water-resistant rating, and much more. Learn how to use them with this new Tiso I6 Earbuds Manual.

Tiso I6 Earbuds Manual | Everything You Need To Know!

Tiso I6 Earbuds Manual | How to Pair / Connect?

To iOS and Android phones

Step 1: Open the lid of the charging case. After that, an orange light will turn on in the left earbud and a white and orange light will turn on in the left one, and the earbuds will turn on automatically.

When a white and orange light starts flashing on the right earbud, they will be ready to pair to any device.

Step 2: Go to the device’s Bluetooth settings.

Step 3: Select “Tiso I6”. If a password is needed, type “0000”.

Step 4: After that, the light will turn off, and the pairing will be done.

To PC (Windows)

Step 1: Turn on Window’s Bluetooth.

Step 2: Go to the settings.

Step 3: Go to “Bluetooth and other devices”.

Step 4: Click on “Add device”.

Step 5: Open the lid of the charging case. After that, an orange light will turn on in the left earbud and a white and orange light will turn on in the left one, and the earbuds will turn on automatically.

When a white and orange light starts flashing on the right earbud, they will be ready to pair to any device.

Step 6: Select “Tiso I6”. If a password is needed, type “0000”.

Step 7: After that, the light will turn off, and the pairing will be done.

Tiso I6 Earbuds Manual | How to Wear?

Step 1: Take both earbuds out of the charging case.

Step 2: Identify the left and right earbuds.

Step 3: Choose the ear tips that best suit your ears.

Step 4: Insert the headphones into the inner canal of the ears.

Step 5: Rotate for the best possible comfort and best fit, and make sure that the microphone is pointing to the mouth.

Tiso I6 Earbuds Manual | How to Turn On and Off?

Turn on: Open the lid of the charging case. After that, an orange light will turn on in the left earbud and a white and orange light will turn on in the left one, and the earbuds will turn on automatically.

Turn off: Place the earbuds into the charging case and close its lid. After that, the earbuds will turn off automatically.

How to Control? / How to Operate? – Instructions

• Play or pause music: Press the multifunction touch button on any of the earbuds two times.
• Play the next song: Press and hold the multifunction touch button on the right earbud for about 3 seconds.
• Play the previous song: Press and hold the multifunction touch button on the left earbud for about 3 seconds.
• Answer an incoming call: Press the multifunction touch button on any of the earbuds two times.
• End a current call: Press the multifunction touch button on any of the earbuds two times.
• Reject an incoming call: Press and hold the multifunction touch button on any of the earbuds.
• Activate the voice assistant: Press the multifunction touch button on any of the earbuds three times.

Tiso I6 Earbuds Manual | How to Activate Mono Mode?

To activate or deactivate the mono mode in the Tiso I6 Earbuds, all you have to do is to pair the earbuds to the device and take out one of the earbuds from the charging case. It will start working by itself.

Tiso I6 Earbuds Manual | How to Charge?

Earbuds

To charge the earbuds, all you have to do is to place them into the charging case and close the lid. The earbuds will start charging automatically.

Charging case

To charge the charging case, all you have to do is to connect the case to a USB charger or charging port with the included USB-A to C cable. It will start charging automatically.

Tiso I6 Earbuds Manual | How to Reset?

Step 1: Go to the Bluetooth section on the connected device, and delete or forget the “Tiso I6” earbuds.

Step 2: Take the earbuds out of the charging case.

Step 3: Press and hold the multifunction touch button on both earbuds for about 5 seconds, while a white and orange light starts flashing on the right earbud. After that, an orange light will turn on and off in both earbuds.

Step 4: Press and hold the multifunction touch button on both earbuds for about 15 seconds, and a while and orange light will start flashing on the right earbud. After that, an orange light will turn on and off in both earbuds.

Step 5: Place them into the charging case and wait for 5 seconds.

After that, the resetting will be done.

Tiso I6 Earbuds Manual | LED Light Status

• An orange light turns on in the left earbud and a white and orange light turns on in the left one: The earbuds turn on.
• A white and orange light starts flashing on the right earbud: The earbuds are ready to pair with any device.
• The white and orange light flashing on the right earbud turns off: The earbuds are connected to the desired device.
• White lights flash on both earbuds when an incoming call on the device: There’s an incoming call.
• A white and orange light starts flashing on the right earbud when resetting: Earbuds resetting.
• An orange light turns on and off in both earbuds when resetting: Earbuds resetting.
• A white light flashing on the right earbud while resetting: Earbuds resetting.
• An orange light flashes once in both earbuds while resetting: Earbuds resetting.

Some Common Earbuds Problems & Troubleshooting

Left / Right / One side of the earbuds have stopped working

If this happens, it may be because it is low on battery or it did not connect correctly with the device. To fix this, you can do the following:

1. Try charging the earbud that is not working or both, placing them in the charging case.

2. Try factory resetting the earbuds.

3. Check if the earbuds are operating within a normal working range

If that doesn’t work, the earbud is probably faulty, and I can go for a refund or replacement of it.

Left / Right / One side of the earbuds has a low volume

If this happens, it may be because the earbuds are dirty or the volume is set low. To fix this, you can do the following:

1. Try cleaning the earbud using a cotton swab or carefully clean the mesh with a pin.

2. Try factory resetting the earbuds.

Microphone not working

If this happens, it can be because the microphone is muted, or the earbuds are badly positioned. To fix this, you can do the following:

If the microphone is muted, check the device microphone volume. If that doesn’t work, that means that there might be a defect in the earbud, so try replacing them or get a refund.

Tiso I6 earbuds not connecting to Windows/laptop/PC

If the earbuds are earbuds not connecting, it can be because the Bluetooth on the computer has a pairing problem. To fix this, you can do the following:

1. Try disabling Bluetooth from nearby devices >>> then activate pairing mode of the earbuds, pair and connect earbuds from Settings >>> Bluetooth & other devices >>> Add a new device >>>> elect Bluetooth,

2. Try uninstalling and reinstalling the Bluetooth driver, or update the Bluetooth driver. All can be done in Manage >>> Device Manager, reset earbuds (if available), and then repeat the step.

3. Try resetting the earbuds.

FAQs

We hope you now know how to operate the earbuds from the above Tiso I6 Earbuds Manual. Want to know anything about them? Do not hesitate to ask in the comments section.