Home Audiophile Earbuds Manuals The Tozo A1 have the IPX5 certification, Bluetooth 5.3, a battery life of about 6 hours + 24 using the charging case, a 6mm speaker, and more. Learn how to use them with this new Tozo A1 Manual. If you are interested in purchasing these earbuds, you can easily do it using the Tozo official website and Amazon. Also, if you want to give the original manual a look, you can do it here. What's Inside ToggleTozo A1 Specs SheetTozo A1 AccessoriesTozo A1 Manual | This Is All You Need To Know!How To Pair The Earbuds? How To Wear These Earbuds?How To Turn On And Off?How to Control? / How to Operate? – InstructionsHow To Activate The Mono Mode?How To Charge The Earbuds? What Do The Lights Mean? Do These Earbuds Have An App?How To Reset These Earbuds?Some Common Problems & TroubleshootingFAQs Tozo A1 Specs Sheet ModelTozo A1WeightEarbuds: 3.7 grams eachWaterproof/IP ratings IPX5Bluetooth version V5.3Range/Distance10 metersDriver6mmAudio DecodingSBC, AACConnectivity Port/Charging CableType-CSpeaker frequency response20Hz – 20kHzBattery Life Earbuds: 6 hours Charging case: 24 hoursCharging Time Earbuds: About 2 hours Charging case: About 2 hoursApp Support NoControls/Features Play or pause music, play the next and previous song, turn the volume up and down, answer, end, and reject an incoming call, voice assistantAccessories Charging case, user manual and quick start guide, USB cable, ear tipsPrice35 USD Tozo A1 Accessories The earbuds come with the following accessories: Charging case. User manual and quick start guide. USB cable. Ear tips. Credits: Yinksmedia Tozo A1 Manual | This Is All You Need To Know! How To Pair The Earbuds? To iOS and Android phones Step 1: Open the charging case and take the earbuds out. After that, the earbuds will turn on automatically. When a blue and red light starts flashing in one of the earbuds, they will be ready to pair with any device. Step 2: Turn on the Bluetooth on the desired device. Step 3: Go to the device’s Bluetooth settings. Step 4: Select “TOZO-A1”. If a password is needed, type “0000”. After that, a blue light will start flashing every 3 seconds, and the pairing will be done. To PC (Windows) Step 1: Turn on the Window’s Bluetooth. Step 2: Go to the settings. Step 3: Go to “Bluetooth and other devices”. Step 4: Click on “Add device”. Step 5: Click on Bluetooth. Step 6: Open the charging case and take the earbuds out. After that, the earbuds will turn on automatically. Step 7: Select “TOZO-A1”. If a password is needed, type “0000”. After that, a blue light will start flashing every 3 seconds, and the pairing will be done. How To Wear These Earbuds? Step 1: Take both earbuds out of the charging case. Step 2: Identify the left and right earbuds. Step 3: Choose the ear tips that best suit your ears. Step 4: Insert the headphones into the inner canal of the ears. Step 5: Rotate for the best possible comfort and best fit, and make sure that the microphone is pointing to the mouth. How To Turn On And Off? Turn on: Open the charging case and take the earbuds out. After that, the earbuds will turn on automatically. Also, you can press and hold the multifunction touch button on both earbuds for about 3 seconds. Turn off: Place the earbuds into the charging case and close its lid. After that, the earbuds will turn off automatically. Also, you can press and hold the multifunction touch button on both earbuds for about 5 seconds. How to Control? / How to Operate? – Instructions NOTE: The multifunction touch button is placed on the top part of the body of the earbuds. Play or pause music: Press the multifunction touch button on any of the earbuds one time. Turn the volume up: Press and hold the multifunction touch button on the right earbud. Turn the volume down: Press and hold the multifunction touch button on the left earbud. Play the next song: Press the multifunction touch button on any of the earbuds three times. Play the previous song: Press the multifunction touch button on any of the earbuds four times. Answer an incoming call: Press the multifunction touch button on any of the earbuds one time. End a current call: Press the multifunction touch button on any of the earbuds one time. Reject an incoming call: Press and hold the multifunction touch button on any of the earbuds for about 2 seconds. Activate the voice assistant: Press the multifunction touch button on any of the earbuds three times. How To Activate The Mono Mode? To activate or deactivate the mono mode in the Tozo A1, all you have to do is to pair the earbuds to the device and take out one of the earbuds from the charging case. It will start working by itself. Left earbud Right earbud How To Charge The Earbuds? Earbuds To charge the earbuds, all you have to do is to place them into the charging case and close the lid. The earbuds will start charging automatically. Charging case To charge the charging case, all you have to do is to connect the case to a USB charger or charging port with the included USB-A to C cable. What Do The Lights Mean? Earbuds A blue and red light starts flashing in one of the earbuds: The earbuds are ready to pair with any device. A blue light flashes every 3 seconds: The earbuds are connected. A red light flashing while on the charging case: The earbuds are charging. Said red light turns off while on the charging case: The earbuds are fully charged. A red light flashing: The earbuds have a low battery. A red light flashes for one second while resetting: The earbuds are resetting. Charging case One light flashing: The case has less than 30% of battery. One light on and one flashing: The case has less than 55% of battery. Two lights on and one flashing: The case has less than 75% of battery. Three lights on and one flashing: The case has less than 100% of battery. All lights on: The case is fully charged. Do These Earbuds Have An App? Sadly, these earbuds don’t come with a specialized app or app support. How To Reset These Earbuds? Step 1: Delete all “TOZO-A1” pairing records on the connected device. Step 2: Turn off the Bluetooth function on the device. Step 3: Take both earbuds out of the charging case. Step 4: Press the multifunction touch button on both earbuds 5 times, until a red light flashes for one second. Step 5: Place the earbuds into the charging case. After that, the resetting will be done. Some Common Problems & Troubleshooting Left/Right/One side of the earbuds has stopped working If this happens, it may be because it is low on battery or it did not connect correctly with the device. To fix this, you can do the following: 1. Try charging the earbud that is not working or both, placing them in the charging case.See alsoKTGEE T08 Manual | Instructions & TroubleshootingGines·March 22, 2024 2. Try factory resetting the earbuds. 3. Check if the earbuds are operating within a normal working range If that doesn’t work, the earbud is probably faulty, and I can go for a refund or replacement of it. Left/Right/One side of the earbuds has a low volume If this happens, it may be because the earbuds are dirty or the volume is set low. To fix this, you can do the following: 1. Try cleaning the earbud using a cotton swab or carefully clean the mesh with a pin. 2. Try factory resetting the earbuds. The microphone is not working If this happens, it can be because the microphone is muted, or the earbuds are badly positioned. To fix this, you can do the following: If the microphone is muted, check the device microphone volume. If that doesn’t work, that means that there might be a defect in the earbuds, so try replacing them or getting a refund. The earbuds are not connecting to Windows/laptop/PC If the earbuds are earbuds not connecting, it can be because the Bluetooth on the computer has a pairing problem. To fix this, you can do the following: 1. Try disabling Bluetooth from nearby devices >>> then activate the pairing mode of the earbuds, pair and connect earbuds from Settings >>> Bluetooth & other devices >>> Add a new device >>>> Select Bluetooth. 2. Try uninstalling and reinstalling the Bluetooth driver, or updating the Bluetooth driver. All can be done in Manage >>> Device Manager, reset earbuds (if available), and then repeat the step. 3. Try resetting the earbuds. FAQs Are the Tozo A1 waterproof? No, the Tozo A1 are not waterproof (IPX6 and up). They have a rating of IPX5, which means they’re protected against some water projected from a nozzle. Do the Tozo A1 have a microphone? Yes, the earbuds come with integrated microphones. Do the Tozo A1 have a low latency/gaming mode? No, these earbuds don’t have a low latency/gaming mode. Can the Tozo A1 connect to PC and Laptop? Yes, these earbuds can connect to PCs, laptops, and even tablets. Are the Tozo A1 noise canceling? No! These earbuds don’t come with noise-cancellation technology. How to know when the Tozo A1 are fully charged? When the earbuds are charging, a red light is on. When fully charged, the light turns off. We hope you now know how to operate the earbuds from the above Tozo A1 Manual. Want to know anything about the earphones? Do not hesitate to ask in the comments section.