TOZO-NC2-ANC-Manual-7

TOZO NC2 ANC Manual | Step-by-step Pairing & Troubleshooting

Aliexpress banner

The TOZO NC2 ANC have the IPX6 water-proof certification, Bluetooth in its 5.2 version, a 12mm high fidelity dynamic driver, 5 to 8 hours of listening on a full charge with the ANC on and off, 32 extra hours in the compact charging case, and much more. Learn how to use them with this new TOZO NC2 ANC Manual.

TOZO NC2 ANC Manual | Everything You Need To Know!

TOZO NC2 ANC Manual | How to Pair / Connect?

To iOS and Android phones

Step 1: Open the lid of the charging case.

Step 2: Press and hold the button on the charging case for 3 seconds. The earbuds will automatically turn on and pair to each other, and they will be ready to pair.

Step 3: Go to the Bluetooth settings.

Step 4: Select “TOZO-NC2”. If a password is needed, type “0000”.

Step 5: After that, the pairing will be done.

To PC (Windows)

Step 1: Turn on Window’s Bluetooth.

Step 2: Go to the settings.

Step 3: Go to “Bluetooth and other devices”.

Step 4: Click on “Add device”.

Step 5: Click on Bluetooth.

Step 6: Open the lid of the charging case.

Step 7: Press and hold the button on the charging case for 3 seconds. The earbuds will automatically turn on and pair to each other, and they will be ready to pair.

Step 8: Select “TOZO-NC2”. If a password is needed, type “0000”.

Step 9: After that, the pairing will be done.

TOZO-NC2-ANC-Manual-1

TOZO NC2 ANC Manual | How to Wear?

Step 1: Take both earbuds out of the charging case.

Step 2: Identify the left and right earbuds.

Step 3: Choose the ear tips that best suit your ears.

Step 4: Insert the headphones into the inner canal of the ears.

Step 5: In order to obtain a better noise cancellation effect, the wearing angle can be adjusted appropriately after wearing so that the earbuds are slightly pushed into the ear canal.

TOZO-NC2-ANC-Manual-2

TOZO NC2 ANC Manual | How to Turn On ANC?

To turn on and off the ANC feature in the TOZO NC2 ANC, all you have to do is to press once the multifunction touch panel on the left earbud.

TOZO NC2 ANC Manual | How to Turn On and Off?

Turn on

Automatically: Open the lid of the charging case. They will turn on automatically.

Turn off

Automatically: Place the earbuds into the charging case and close its lid. They will turn off automatically.

Manually: Press and hold the multifunction touch panel on both earbuds for about 5 seconds. They will turn off.

TOZO-NC2-ANC-Manual-3

How to Control? / How to Operate? – Instructions

  • Play or pause music: Press the multifunction touch panel on the right earbud once times.
  • Turn the volume up: Press and hold the multifunction touch panel on the right earbud.
  • Turn the volume down: Press and hold the multifunction touch panel on the left earbud.
  • Play the next song: Press the multifunction touch panel on the right earbud two times.
  • Play the previous song: Press the multifunction touch panel on the left earbud two times.
  • Answer an incoming call: Press the multifunction touch panel on any of the earbuds once.
  • End a call: Press and hold the multifunction touch panel on any of the earbuds.
  • Reject an incoming call: Press and hold the multifunction touch panel on any of the earbuds.
  • Activating the voice assistant: Press the multifunction touch panel on any of the earbuds three times.
TOZO-NC2-ANC-Manual-4
Credits: RTINGS.com

TOZO NC2 ANC Manual | How to Activate Mono Mode?

To activate the mono mode in the TOZO NC2 ANC, all you have to do is to pick up one of the earbuds from the charging case, and it will work by itself.

TOZO NC2 ANC Manual | How to Charge

Earbuds

To charge the earbuds, all you have to do is to place them into the charging case and close the lid. The earbuds will start charging automatically.

Charging case

To charge the charging case, all you have to do is plug a 5V USB Type-C cable into the port on the charging case. It will start charging automatically.

TOZO-NC2-ANC-Manual-5
Credits: Scarbir

TOZO NC2 ANC Manual | How to Reset?

Step 1: Delete all “TOZO-NC2” records on the device.

Step 2: Turn off the Bluetooth of the device.

Step 3: Take out the earbuds from the charging case.

Step 4: Tap the touch control panels in both earbuds 3 times quickly. The earbuds will turn off.

Step 5: After that, the resetting process will be done.

TOZO NC2 ANC Manual | LED Light Status

Charging case

The four charging indicators will light up progressively while charging.

TOZO-NC2-ANC-Manual-6
Credits: Sourajit Saha

Some Common Earbuds Problems & Troubleshooting

Left / Right / One side of the earbuds have stopped working

If this happens, it may be because it is low on battery or it did not connect correctly with the device. To fix this, you can do the following:

1. Try charging the earbud that is not working or both, placing them in the charging case.

2. Try factory resetting the earbuds.

3. Check if the earbuds are operating within a normal working range.

If that doesn’t work, the earbud is probably faulty, and I can go for a refund or replacement of it.

Left / Right / One side of the earbuds has low volume

If this happens, it may be because the earbuds are dirty or the volume is set low. To fix this, you can do the following:

1. Try cleaning the earbud using a cotton swab or carefully clean the mesh with a pin.

2. Try factory resetting the earbuds.

Microphone not working

If this happens, it can be because the microphone is muted, or the earbuds are badly positioned. To fix this, you can do the following:

If the microphone is muted, check the device microphone volume. If that doesn’t work, that means that there might be a defect in the earbud, so try replacing them or get a refund.

TOZO NC2 ANC earbuds not connecting to Windows/laptop/PC

If the earbuds are earbuds not connecting, it can be because the Bluetooth on the computer has a pairing problem. To fix this, you can do the following:

1. Try disabling Bluetooth from nearby devices >>> then activate pairing mode of the earbuds, pair and connect earbuds from Settings >>> Bluetooth & other devices >>> Add a new device >>>> elect Bluetooth,

2. Try uninstalling and reinstalling the Bluetooth driver, or update the Bluetooth driver. All can be done in Manage >>> Device Manager, reset earbuds (if available), and then repeat the step.

3. Try resetting the earbuds.

TOZO-NC2-ANC-Manual-7
Credits: Scarbir

FAQs

Are TOZO NC2 ANC waterproof?

The TOZO NC2 ANC have an IPX6 water-resistant rating, which means that they’re dustproof and are, also, protected against water.

Does TOZO NC2 ANC have a microphone?

Yes, the TOZO NC2 ANC have integrated microphones.

Do TOZO NC2 ANC have low latency/gaming mode?

No, the TOZO NC2 ANC don’t have low latency/gaming mode.

How to know when TOZO NC2 ANC are fully charged?

The earbuds take about 1.5 hours to charge so, after that time, they should be fully charged.

Can TOZO NC2 ANC connect to PC and Laptop?

Yes, the TOZO NC2 ANC can connect to PCs, laptops and tablets.

We hope you now know how to operate the earphone from the above TOZO NC2 ANC Manual. Want to know anything about the earphones? Do not hesitate to ask in the comments section.

In case you want or need to contact the TOZO company, all your information can be found on its Support page, where you can find numbers and emails available for several countries! Also, they have an About page, with information about their products and the company itself!