Tribit FlyBuds 3S Manual | Step-by-step Pairing & Troubleshooting

The Tribit FlyBuds 3S have Bluetooth 5.2, a battery life of about 8 hours + 150 hours using the charging case, the amazing IPX8 water and dustproof certification, built-in microphones, ENC for HD calls, and more. Learn how to use them with this new Tribit FlyBuds 3S Manual.

Tribit FlyBuds 3S Manual | Pairing & Charging Guide

Tribit FlyBuds 3S Manual | How to Pair / Connect?

To iOS and Android phones

Step 1: Open the lid of the charging case. After that, the earbuds will turn on automatically.

Step 2: Turn on Bluetooth on the desired device.

Step 3: Go to the device’s Bluetooth settings.

Step 4: Select “Tribit FlyBuds 3S”. If a password is needed, type “0000”.

Step 5: After that, the pairing will be done.

To PC (Windows)

Step 1: Turn on Bluetooth on the desired device.

Step 2: Go to the settings.

Step 3: Go to “Bluetooth and other devices”.

Step 4: Click on “Add device”.

Step 5: Open the lid of the charging case. After that, the earbuds will turn on automatically.

Step 6: Select “Tribit FlyBuds 3S”. If a password is needed, type “0000”.

Step 7: After that, the pairing will be done.

Tribit FlyBuds 3S Manual | How to Wear?

Step 1: Take both earbuds out of the charging case.

Step 2: Identify the left and right earbuds.

Step 3: Choose the ear tips that best suit your ears.

Step 4: Insert the headphones into the inner canal of the ears.

Step 5: Rotate for the best possible comfort and best fit, and make sure that the microphone is pointing to the mouth.

Tribit FlyBuds 3S Manual | How to Turn On and Off?

Turn on: Open the lid of the charging case. After that, the earbuds will turn on automatically. Also, you can press and hold the multifunction touch button on both earbuds for about 6 seconds.

Turn off: Place the earbuds into the charging case and close its lid. After that, the earbuds will turn off automatically. Also, you can press and hold the multifunction touch button on both earbuds for about 10 seconds.

How to Control? / How to Operate? – Instructions

• Play or pause music: Press the multifunction touch button on any of the earbuds two times.
• Play the next song: Press the multifunction touch button on any of the earbuds three times.
• Answer an incoming call: Press the multifunction touch button on any of the earbuds two times.
• End a current call: Press the multifunction touch button on any of the earbuds two times.
• Reject an incoming call: Press and hold the multifunction touch button on any of the earbuds for 2 seconds.
• Activate the voice assistant: Press the multifunction touch button on any of the earbuds three times.

Tribit FlyBuds 3S Manual | How to Activate Mono Mode?

To activate or deactivate the mono mode in these earbuds, all you have to do is to pair the earbuds to the device and take out one of the earbuds from the charging case. It will start working by itself.

Tribit FlyBuds 3S Manual | How to Charge?

Earbuds

To charge the earbuds, all you have to do is to place them into the charging case and close the lid. The earbuds will start charging automatically.

Charging case

To charge the charging case, all you have to do is to connect the case to a USB charger or charging port with the included USB-A to C cable. It will start charging automatically.

Tribit FlyBuds 3S Manual | How to Reset?

Step 1: Delete all “Tribit FlyBuds 3S” pairing information from the connected device.

Step 2: Place both earbuds into the charging case and keep the lid open.

Step 3: Press and hold the button placed on the charging case earbuds for a couple of seconds, until all 4 lights flash 4 times. After that, the resetting will be done.

Tribit FlyBuds 3S Manual | LED Light Status

Charging case

• All lights off: The case has 0% of battery.
• One light on: The case has between 1% and 25% of battery.
• Two lights on: The case has between 26% and 50% of battery.
• Three lights on: The case has between 51% and 75% of battery.
• Four lights on: The case has a full battery.
• All lights off with the earbuds inside: The earbuds have 0% of battery.
• One light on with the earbuds inside: The earbuds have between 1% and 25% of battery.
• Two lights on with the earbuds inside: The earbuds have between 26% and 50% of battery.
• Three lights on with the earbuds inside: The earbuds have between 51% and 75% of battery.
• Four lights on with the earbuds inside: The earbuds have a full battery.
• All lights flashing 4 times while resetting the earbuds: The earbuds are resetting.

Some Common Earbuds Problems & Troubleshooting

Left / Right / One side of the earbuds have stopped working

If this happens, it may be because it is low on battery or it did not connect correctly with the device. To fix this, you can do the following:

1. Try charging the earbud that is not working or both, placing them in the charging case.

2. Try factory resetting the earbuds.

3. Check if the earbuds are operating within a normal working range

If that doesn’t work, the earbud is probably faulty, and I can go for a refund or replacement of it.

Left / Right / One side of the earbuds has a low volume

If this happens, it may be because the earbuds are dirty or the volume is set low. To fix this, you can do the following:

1. Try cleaning the earbud using a cotton swab or carefully clean the mesh with a pin.

2. Try factory resetting the earbuds.

The microphone is not working

If this happens, it can be because the microphone is muted, or the earbuds are badly positioned. To fix this, you can do the following:

If the microphone is muted, check the device microphone volume. If that doesn’t work, that means that there might be a defect in the earbud, so try replacing them or get a refund.

The earbuds are not connecting to Windows/laptop/PC

If the earbuds are earbuds not connecting, it can be because the Bluetooth on the computer has a pairing problem. To fix this, you can do the following:

1. Try disabling Bluetooth from nearby devices >>> then activate pairing mode of the earbuds, pair and connect earbuds from Settings >>> Bluetooth & other devices >>> Add a new device >>>> elect Bluetooth,

2. Try uninstalling and reinstalling the Bluetooth driver, or updating the Bluetooth driver. All can be done in Manage >>> Device Manager, reset earbuds (if available), and then repeat the step.

3. Try resetting the earbuds.

FAQs

We hope you now know how to operate the earphone from the above Tribit FlyBuds 3S Manual. Want to know anything about the earphones? Do not hesitate to ask in the comments section.